USER MANUALMUSIC ENJOYMENT FOR EVERYONE
BTX2 UNIVERSAL BLUETOOTH® WIRELESS MMCX ADAPTER CABLEwww.MEEaudio.com/BTX2
BLUETOOTH SUPPORT PAGEPlease visit the Bluetooth Support page at MEEaudio.com/Bluetooth for video setup guides and troubleshooting information.
https://goo.gl/Zrqt1p
POWERED BY
BTX2 PRODUCT OVERVIEW
STEP 1 – CHARGING
Connect the Micro-USB charging cable to any powered USB port and to the charging port of the BTX2. The status indicator light will turn blue once the BTX2 is charged and ready for use. Close the USB port cover completely after charging for maximum sweat resistance.
STEP 2: INSTALLING EARPIECES
Make sure to attach the cable connector marked “R” to the right earpiece and the connector marked “L” to the left earpiece.
STEP 2: INSTALLING EARPIECES (CONTINUED)
Attach the cable by aligning the connectors with the earpieces and pushing them in until they “click”. Pull back slightly on each connector to make sure it is fitted securely.
STEP 2: INSTALLING EARPIECES (CONTINUED)To detach the cable, grasp the earpiece and cable connector firmly, and pull straight apart.
STEP 3: PAIRING
Press and hold the Multifunction button for about 4 seconds until you hear the headset say “Pairing” and the light flashes red and blue.
STEP 3: PAIRING (CONTINUED)Open the Bluetooth menu on the device you wish to pair (usually located in Settings > Bluetooth). If needed, select “search for devices”, “add new device”, or “refresh”.
STEP 3: PAIRING (CONTINUED)Select “MEE audio BTX2” and allow pairing to complete. Use “0000” if a pin is required. Visit the Bluetooth Support Page at MEEaudio.com/Bluetooth for additional Bluetooth pairing and setup information.
STEP 4: WEARING THE BTX2
Identify the right and left earpieces. Place the cable behind your neck and route the ear hooks over your ears.
STEP 4: WEARING THE BTX2 (CONTINUED)Place the earpieces in your ears. Adjust each earpiece until it fits flush in your ear and the eartip seals the ear canal.
STEP 4: WEARING THE BTX2 (CONTINUED)Tighten the sliding cable cinch for the most secure fit.
BASIC FUNCTIONALITY AND CONTROLS
* You may need to bring your music player application up on the screen for media playback to start** Not all devices support this functionality
DYNAMIC AUDIO ENHANCEMENT
The BTX2 features on-the-fly audio adjustment with three audio modes:
FACTORY RESET
FACTORY RESETTo perform a full reset, first put the BTX2 in standby mode (headset is powered on but not connected to any devices). Make sure to turn off Bluetooth or delete the “MEE audio BTX2” pairing from any nearby devices that have previously been paired with the BTX2.Once in standby mode, press and hold the Multifunction and volume up buttons simultaneously until you hear the headset say “Factory Reset Complete”. All previously paired devices will be cleared from memory and a new pairing will need to be created before the BTX2 can be used.
WARNING
Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds. Keep the device and packaging out of reach of children.
ADDITIONAL INFORMATION
FOR ADDITIONAL SUPPORT• Visit our Bluetooth Support Guide at MEEaudio.com/Bluetooth for easy-to-follow video setup guides and the latest troubleshooting information• Contact us at WARRANTYMEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, visit MEEaudio.com/Support.
Have a question?Email
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.Siri® is a registered trademark of Apple Inc.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.and any use of such marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners.Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
MEE audio BTX2 Universal Bluetooth Wireless Mmcx Adapter Cable User Manual – MEE audio BTX2 Universal Bluetooth Wireless Mmcx Adapter Cable User Manual –
[xyz-ips snippet=”download-snippet”]