MEE audio C20PTZ Professional USB Camera User Manual
SETUP GUIDE
To learn more about using your camera, scan the QR code or enter the URL below into your web browser: MEEaudio.com/CameraHelp
Getting Started
Installing Batteries
Install 2x AAA batteries in the battery compartment located on the back of the remote control
Note: Batteries not included
Placement Option 1: Table or Tripod
Place the camera on a flat, stable surface or on attach to a compatibletripod
Placement Option 2:Ceiling Mount
The camera can also be mounted on a ceiling using the included mounting kit
Use the included hardware to attach the mounting plate to the ceiling as shown. Point the arrow on the mounting plate in the direction you want the camera to face.
Caution: If you’re mounting the camera on drywall, be sure to use the included drywall anchors.
Mounting Kit Contents
- 1x mounting plate
- 3x drywall anchor
- 3x screw
Push the camera against the mounting plate and rotate it clockwise.
Caution: Always hold the camera by the base and avoid touching the lens
Setup
Connect the camera to your computer’s USB portNote: The camera will perform an automatic scan across its full rangeof motion when connected
Video Setup
This camera is a plug-and-play device and does not require additional software but you may have to select it as the default video device in your video recording or teleconferencing app:
For more information about using your camera with different applications, scan the QR code or enter the URL below into your web browser:
MEEaudio.com/CameraHelp
Microphone Setup
To use the integrated microphone, you may also need to select it from your video recording or teleconferencing app:
This camera also supports up to two external 3.5mm microphones. To use external microphones, simply plug them into the 3.5mm inputs on the back of the camera.
Functionality
Camera Overview
Using the Remote Control
Note: Aim the remote at the IR sensor on the base of the camera
- Power on/off *
- Audio mute **
- Pan up
- Pan left
- Pan right
- Pan down
- Reset camera
- position and zoom
- Zoom in
- Zoom out
- Vertical flip ***
- Increase volume **
- Decrease volume **
The Power on/off button on the remote and on the camera body work independently. If the camera is powered off via the Power button on the camera body, the red Power indicator light will light up to indicate that the master power switch has been used and the remote is disabled
Affects both the built-in microphones and any external microphones connected to the 3.5 mm microphone input(s). The Mute indicator light on the base of the camera will be red while the microphones are muted
For placement on ceilings
Additional Information
Safety and Care
- Avoid touching the camera lens with your fingers, sharp objects, and coarse materials
- Use a clean, soft cloth to clean the camera if needed. Do not use chemical cleaners.
- Avoid dropping the camera as impact may damage its internal components or scratch its lens
- There are no user replaceable/reparable parts in this device. Disassembling it will void your warranty
Disposal and Recycling
Dispose of this product in accordance with all local laws and regulations. Because this product contains electronic components, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options.
Warranty
MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, visit MEEaudio.com/support
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
Microsoft® Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. ©2018 Google LLC All rights reserved. Chrome OS™ operating system is a trademark of Google LLC. macOS® is a registered trademark of Apple Inc. All other trademarks are the property of their respective owners.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.govFor more information about this warning visit MEEaudio.com/prop65
Warnings
This device is designed and manufactured to operate within its defined design limits. Misuse may result in electric shock or fire. Read and follow these instructions carefully.
- To prevent fire or shock hazards, do not expose this unit to rain or moisture. If the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried.Note: liquid submersion voids the warranty.
- Only use attachments/accessories specified by the manufacturer
Changes or modifications to this unit not expressly approved by MEE audio could void the user’s authority to operate the equipment.
Keep the device and packaging out of reach of children.
For Additional SupportView MEEaudio.com/CameraHelp for easy-to-follow setup videos and the latest troubleshooting information.Still Have Questions?Email Support: [email protected]
References
[xyz-ips snippet=”download-snippet”]