Universal Dual Bluetooth Wireless Audio TransmitterUser Guide
For Headphones and Speakers User GuideModel: AF-T1Bwww.MEEaudio.com/Connect
CONNECT SUPPORT GUIDE
Visit MEEaudio.com/ConnectHelp foreasy-to-follow setup videos, full user manuals,and the latest troubleshooting information.
PACKAGE CONTENTS
1. PLUG IN USB POWER CABLE
POWER ON TRANSMITTER
2. PAIR A BLUETOOTH HEADPHONE OR SPEAKER
- Put your headphone or speaker in pairing mode*
- Tap pairing button “A” on the Connect.
Once the Connect and your device are both in pairing mode simultaneously and within 3 ft (1m) of each other, they will be paired.
- PAIRING: LIGHT BLINKS
- CONNECTED: SOLID LIGHT
NOTE: SOUND MAY BE QUIET OR INTERMITTENT WHILE PAIRING IS IN PROGRESS.
*CONSULT THE USER MANUAL OF YOUR DEVICE IF YOU ARE NOT SURE HOW TO PUT IT IN PAIRING MODE
3. PAIR A 2ND HEADPHONE OR SPEAKER (OPTIONAL)
A second Bluetooth audio device can be paired after one is already connected.
To pair the second device, put it in pairing mode*, then tap pairing button “B” on the Connect.
Once the Connect and your device are both in pairing mode simultaneously and within 3 ft (1m) of each other, they will be paired.
NOTE: SOUND MAY BE QUIET OR INTERMITTENT WHILE PAIRING IS IN PROGRESS.
*CONSULT THE USER MANUAL OF YOUR DEVICE IF YOU ARE NOT SURE HOW TO PUT IT IN PAIRING MODE
4. Choose an audio cable supported by your tv
Select “PCM / Stereo” in the audio output settings menu** of your TV **if sound is still not audible, select “PCM / Stereo” in the audio output settings menu(s) of your video streaming app(s) and/or device(s)
PROCEED TO STEP 5
EXACT MENU AND ITEM NAMES MAY VARY BETWEEN TVS
PROCEED TO STEP 5
EXACT MENU AND ITEM NAMES MAY VARY BETWEEN TVS
5. ADJUSTING HEADPHONE VOLUME
Volume can be individually adjusted on each headphone or speaker paired with the Connect.
WHEN FINISHED, POWER OFF HEADPHONES UNTIL NEXT USE
SUBSEQUENT USE
To reconnect a previously paired headphone or speaker, power on the Connect first (if powered off) and then power on the headphone or speaker. A solid blue light on the Connect will indicate that a connection has been established. It may take up to 60 seconds for audio transmission to begin.
LED INDICATOR LIGHTS
The status of the Connect is shown by a green power / charging indicator light on the rear of the unit and two blue indicator lights on the top as follows:
FACTORY RESET / CLEAR MEMORY
To perform a factory reset of the Connect, hold pairing button “A” for approximately 5 seconds until the blue indicator light stops blinking. All previously paired devices will be cleared from memory and a new pairing will need to be created by following the procedure in STEP 2.
WARRANTY
MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty.Please retain a copy of your receipt as proof of purchase.
For more information,visit www.MEEaudio.com/Support
SAFETY AND CARE
- Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight.
- The lifetime of the battery will be significantly reduced if your device is not charged for a long time. It is recommended to charge your device at least once a month.
- Clean with a soft, slightly damp cloth. Do not use chemical cleaners.
- There are no user replaceable/reparable parts in this device. Disassembling it will void your warranty.
- Do not expose the device to liquids. If the device comes in contact with liquids, quickly wipe away.
- If submersed in water, do not turn the device on until completely dried.Note: liquid submersion voids the warranty.
- Do not use around flammable gasses as fire or explosion may occur
WARNING
- Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety.
- Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
- Keep the device and packaging out of reach of children.
CONNECT
QUESTIONS? WE’RE HERE TO HELP!Phone Support: 626-965-1008 x31Monday ~ Friday 9am to 5:30pm PSTEmail Support: All emails are responded to within 2 business days
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners.
Qualcomm® aptX™ is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.
References
[xyz-ips snippet=”download-snippet”]