MEE audio EB1 EARBOOST Bluetooth Wireless User Manual
Adaptive Audio Enhancement Earphones
Model: EB1
GET THE EARBOOST APP:
Our app is now available on the App Store and Google Play. Scan the appropriate QR code, then download and install the app.
MUSIC ENJOYMENT FOR EVERYONE
PRODUCT OVERVIEW
STEP 1: CHARGING
Connect the Micro-USB charging cable to any powered USB port and to the charging port of the EB1.
The status indicator light will turn blue once the earphones are charged and ready for use.
Close the USB port cover completely after charging for maximum sweat resistance.
STEP 2: PAIRING
Press and hold the Multifunction button for about 5 seconds until you hear the headset say “Pairing”.
Open the Bluetooth menu on the device you wish to pair (usually located in Settings > Bluetooth). If needed, select “search for devices”, “add new device”, or “refresh”.
Select “MEE audio EB1” and allow pairing to complete. Use “0000” if a pin is required.
Visit the Bluetooth Support Page at MEEaudio.com/Bluetooth for additional Bluetooth pairing and setup information.
STEP 3: SELECTING EARTIPS AND EARFINS
Select the earfin size that provides the most secure fit, then select the eartips with the best sound and comfort for your ears.
If your music sounds tinny or lacks bass, try different eartips.
STEP 4: WEARING THE EARPHONES
Identify the right and left earpieces.
Place the cable behind your neck and put each earpiece in the corresponding ear.
Adjust each earpiece until it fits flush in your ear and the eartip seals the ear canal.
Tighten the sliding cable cinch for the most secure fit.
When not in use, clip earphones together using built-in magnets.
STEP 5: FUNCTIONALITY AND CONTROLS
* You may need to bring your music player application up on the screen for media playback to start** Not all devices support this functionality
STEP 6: DOWNLOADING THE EARBOOST APP
Search the Apple App Store or the Google Play Store for “EarBoost” or scan the appropriate QR code, then download and install the app.
Note: the EarBoost app requires an internet connection.
Note: the first time the app is launched, you may see a popup saying “MEE audio EB1 would like to pair with your device”. Select “pair” – this is necessary for transferring EQ data to and from the EarBoost app. Afterwards, “MEE audio EB1” may appear twice in your phone or tablet’s Bluetooth devices menu.
STEP 7: GETTING STARTED WITH EARBOOST
Press the “Hearing Test” button (A) to create your initial adaptive audio profile. Follow the on-screen instructions to complete the test.
Once you complete the test and navigate back to the app’s home page, your custom EQ curve will be available under the “My EQ” preset (B).
Press the “Preview” button (C) or play a music track in a background app and toggle the “EarBoost on/off” button (D) to test the difference.
STEP 8: FURTHER ADJUSTMENT
Your custom audio enhancement profile can be further adjusted manually using the drag handles on individual frequencies (A) and also using the “Level” slider (B), which changes the severity of the enhancement.
Once done adjusting, select “Save Profile” (C) to save your custom EQ curve to one of the two available profiles. These can then be accessed and loaded into your EB1 earphones using the “Profile 1” (D) and “Profile 2” (E) buttons.
FACTORY RESET
To perform a full reset, first put the EB1 in standby mode (headset is powered on but not connected to any devices). Make sure to turn off Bluetooth or delete the “MEE audio EB1” pairing from any nearby devices that have previously been paired with the EB1.
Once in standby mode, press and hold the volume up and volume down buttons simultaneously for approximately 8 seconds, until you hear two tones. All previously paired devices will be cleared from memory and the EB1 will enter pairing mode. A new pairing will need to be created before the EB1 can be used.
WARNING
Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
Keep the device and packaging out of reach of children.
FOR ADDITIONAL SUPPORT
- Visit our Bluetooth Support Guide at MEEaudio.com/Bluetooth for additional Bluetooth setup information
- View additional FAQs and troubleshooting guides at MEEaudio.com/Support
- Contact us at [email protected]
WARRANTY
MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, contact your local MEE audio dealer or visit MEEaudio.com/Support
QUESTIONS? WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31Monday ~ Friday 9am to 5:30pm PST
Email Support: [email protected]All emails are responded to within 2 business days
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
Siri®, Apple and the Apple logo are registered trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners.
Qualcomm® aptX™ is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.
References
[xyz-ips snippet=”download-snippet”]