Metra 95-6524B Jeep Liberty Installation Instructions
KIT FEATURES
- Double DIN radio provision
- Painted matte black
KIT COMPONENTS
- A) Radio trim panel
- B) Brackets
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
- 70-6502
Antenna Adapter:
- 40-CR10
TOOLS REQUIRED
- Phillips screwdriver
- Panel removal tool
- Socket wrench
- Dremel or cutting tool
CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the aftermarket radio.
Dash Disassembly
- Remove ashtray and remove one Phillips screw exposed. (Figure A)
- Unclip and remove radio/climate control trim panel.
- Remove (4) Phillips screws securing radio. Disconnect and remove radio.
- Remove the factory climate controls.
- Unclip and remove the 12-volt power plug.
- Remove the factory panel clips and save for kit assembly.
- Cut and remove the factory radio shelf (shaded area) from the sub-dash to make room for the aftermarket DDIN radio. (Figure B)Continue to kit assembly
Kit Assembly
Kit preparation
- Attach the factory panel clips to the Metra radio trim panel. (Figure A)
- Attach the factory climate control to the Metra radio trim panel. (Figure A)
- Attach factory 12-volt power plug to the Metra radio trim panel. (Figure A)
Double DIN radio provision
- Mount the radio to the double DIN brackets with screws included with radio. (Figure A)
- Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.
- Mount assembly into the sub dash.
- Reassemble dash in reverse order of disassembly using the Metra trim panel instead of factory panel.
Metra 95-6524B Jeep Liberty Installation Instruction – Metra 95-6524B Jeep Liberty Installation Instruction –
[xyz-ips snippet=”download-snippet”]