MIDAS 500 Series 4 Band Fully Parametric Equaliser Based User Guide

500 Series 4 Band Fully Parametric Equaliser Based

Quick Start Guide500 SERIES PARAMETRIC EQUALISER 512500 Series 4 Band Fully Parametric Equaliser Based on Midas HERITAGE 3000

2 500 SERIES PARAMETRIC EQUALISER 512

Important Safety Instructions

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

Caution

To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution

These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  11. Use only attachments/ accessories specified by the manufacturer.
  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  13. Unplug this app aratus during lightning storms or when unused for long periods of time.
  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
  16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
  17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
  18. Do not install in a confined space, such as a book case or similar unit.
  19. Do not place naked flame sources, such as lighted candles, on the apparatus.
  20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
  21. Use this apparatus in tropical and/or moderate climates.
LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks

Quick Start Guide 3 or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.Zhongshan Eurotec Electronics Limited No. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong Province, China

Quick Start Guide 13
Controls

Quick Start Guide 15

  1. Mounting holes – The 512 module is mounted to the host 500 series rack chassis or box such as the MIDAS Legend L6 or L10, and secured using two screws top and bottom.
  2. Treble frequency control – This control (outer knob) gives continuous adjustment of the frequency range from 1 kHz to 20 kHz.
  3. Treble gain – This control (inner knob) gives continuous adjustment of treble cut and boost from -15 dB to +15 dB with a 0 dB centre detent.
  4. BELL switch – When this is selected, the treble equaliser curve changes from the traditional MIDAS shelving response to fully parametric operation. The switch’s green LED illuminates to show that the BELL mode is active.
  5. Treble width control – This knob gives continuous control of the bandwidth from 0.1 to 2 octaves. It only operates when the BELL switch is selected.
  6. Hi mid frequency control – This control (outer knob) gives continuous adjustment of the frequency range from 400 Hz to 8 kHz.
  7. Hi mid gain – This control (inner knob) gives continuous adjustment of cut and boost from -15 dB to +15 dB with a 0 dB centre detent.
  8. Hi mid width control – This knob gives continuous control of the bandwidth from 0.1 to 2 octaves.
  9. Lo mid frequency control – This control (outer knob) gives continuous adjustment of the frequency range from 100 Hz to 2 kHz.
  10. Lo mid gain control – This control (inner knob) gives continuous adjustment of cut and boost from -15 dB to +15 dB with a 0 dB centre detent.
  11. Lo mid width control – This knob gives continuous control of the bandwidth from 0.1 to 2 octaves.
  12. Bass frequency control – This control (outer knob) gives continuous adjustment of the frequency range from 20 Hz to 400 Hz.
  13. Bass gain control – This control (inner knob) gives continuous adjustment of cut and boost from -15 dB to +15 dB with a 0 dB centre detent.
  14. BELL switch – When this is selected, the bass equaliser curve changes from the traditional MIDAS shelving response to fully parametric operation. The switch’s red LED illuminates to show that the BELL mode is active.
  15. Equaliser IN switch – This switch inserts the equaliser into the signal path. The switch’s yellow LED illuminates to show that the equaliser is active. When the IN switch is deselected, all the circuitry is completely bypassed (true relay hardware bypass). True bypass mode also occurs if the 500 series rack is powered down, as the signal passes directly from the rack input XLR to the rack output XLR.
  16. Bass width control – This knob gives continuous control of the bandwidth from 0.1 to 2 octaves. It only operates when the BELL switch is selected.
Getting Started
  1. The 512 EQ module is designed to be mounted into a 500 series rack chassis or box, such as the MIDAS Legend L6 or L10. The L6/L10 supplies the input and output connections to the 512 module, as well as internal power to run the module.
  2. With the power to the L6/L10 turned off, install the 512 module by sliding it in carefully so its rear connector correctly fits into the corresponding multi-pin connector of the L6/L10. Use 2 screws to secure the 512 module to the front top and bottom rails. the unit.
  3. Blank spaces in your L6 or L10 can be filled using the MIDAS L1B blank plates. These plates will prevent dirt, dust and other objects from entering
  4. Insert any other modules in your system.
  5. Connect your audio equipment to the input and output of the L6/L10.
  6. Turn on the power to the L6/L10. The 512 module is equipped with an internal power on/off mute relay. After power up, there is a 2 second delay before the output is connected, to avoid power-on thumps. The relay also prevents power-off thumps by muting the output during power down.
Specifications

ControlsTrebleHi mid Lo MidBassEQ in Input and OutputInput Output System Noise at unity gain CMRR, unity gain, 1 kHz Input impedance, 1 kHz Frequency response, unity gain (EQ set flat) Distortion, unity gain, 1 kHz0 dBu +10 dBu +20 dBu Maximum input level, 1 kHz Maximum output level, 1kHz Output impedance, 1 kHz EQTreble (shelf mode)Treble (bell mode)Hi mid (bell only)Lo mid (bell only)

Dual freq/gain knobs, shelf/bell switch, width knob (bell mode) Dual freq/gain knobs, width knob Dual freq/gain knobs, width knob Dual freq/gain knobs, shelf/bell switch, width knob (bell mode) In/out switchMono, balanced line Mono, electronically balanced-97 dBu (22 Hz – 22 kHz) -70 dB (typical) 20 k 20 Hz – 20 kHz, +/- 1 dB<0.005% <0.005% <0.01% +21 dBu +21 dBu 501 kHz to 20 kHz, +/- 15 dB cut/boost, slope = 4 dB per octave 1 kHz to 20 kHz, +/- 15 dB cut/boost, bandwidth 0.1 – 2 octaves 400 Hz to 8 kHz, +/- 15 dB cut/boost, bandwidth 0.1 – 2 octaves 100 Hz to 2 kHz, +/- 15 dB cut/boost, bandwidth 0.1 – 2 octaves

Bass (bell mode)Bass (shelf mode)Power Requirements Voltage Power consumptionPhysical Dimensions (H x W x D) Weight

Quick Start Guide 1920 Hz to 400 Hz, +/- 15 dB cut/boost, bandwidth 0.1 – 2 octaves 20 Hz to 400 Hz, +/- 15 dB cut/boost, slope = 4 dB per octave +16 V and -16 V 100 mA, 3.2 W 132 x 38 x 184 mm (5.2 x 1.5 x 7.2″) 0.7 kg (1.5 lbs)

20 500 SERIES PARAMETRIC EQUALISER 512

Module Connector Pin-Outs

Pin Number – Description

  1. Chassis GND
  2. Output + (hot)
  3. N/A
  4. Output ­ (cold)
  5. Audio GND
  6. N/A
  7. N/A
  8. Input ­ (cold)
  9. N/A
  10. Input + (hot)
  11. N/A
  12. PSU +16 V
  13. PSU GND (0 V)
  14. PSU ­16 V
  15. N/A

Notes L6 and L10 rackmount chassis XLR connections are wired pin 1 = audio GND, pin 2 = + (hot), pin 3 ­ (cold)

Block Diagram

22 500 SERIES PARAMETRIC EQUALISER 512Other important information

Important information

  1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting midasconsoles.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
  2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at midasconsoles.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at midasconsoles.com. Alternatively, please submit an online warranty claim at midasconsoles.com BEFORE returning the product.

24 500 SERIES PARAMETRIC EQUALISER 512 Important information: Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.Warning: Operation of this equipment in a residential environment could cause radio interference.

Quick Start Guide 25

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,