Rhythm Stereo Bluetooth Headset User Manual

Table of Contents

Thank you for choosing RHYTHM Stereo Bluetooth Headset!

RHYTHM lets you listen to high-quality stereo music from your Bluetooth-enabled devices like mobile phone, Xbox or computer, while ensuring you never miss a call. RHYTHM is compatible with all Bluetooth-enabled devices with Bluetooth version 2.1 + EDR specifications supporting Bluetoothheadset and hands free profiles.

For non-bluetooth devices, use the included adapter cable for wired listening from your music player, PC or any other device with a 3.5mm jack.

RHYTHM’s unique folding style is not only fashionable but also convenient. Use the included storage pouch to protect your headset when not in use.

Getting Started

To use your RHYTHM Stereo Bluetooth headset, please follow the steps below:

Ensure your Bluetooth headset is fully charged.
Pair your Bluetooth headset with a Bluetooth-enabled device prior to use.

Charging Your HeadsetYour RHYTHM headset comes with a built-in rechargeable battery and a USB charging cable.RHYTHM can be charged either directly from an AC power supply or through your PC. The battery indicator will turn red when charging. The red light shuts off when charging is complete.

Powering On The HeadsetPress and hold the MFB for 3 seconds until the green light comes on and a “beep” is heard, then release the MFB.

Pairing Your HeadsetIn order to use your headset with a Bluetooth-enabled device, you will first need to pair the two. Prior to pairing your headset, please verify that your Bluetooth-enabled device is compatible. The headset pairing procedure may vary depending on the Bluetooth settings on your mobile phone. Please contactthe manufacturer of your device for further information.

Place the headset and the mobile phone where they are easily viewable, and no more than onemeter apart.
Ensure the headset is turned off.
Press the MFB for 2 seconds until you hear a beep. A blue blinking light indicates that the headset is in pairing mode.
Activate your mobile phone’s Bluetooth pairing function. If you do not know how to enablepairing mode for your phone, please refer to your mobile phone user guide for instructions.
Set the mobile phone to search for Bluetooth devices within range and select “RHYTHM” from the list of devices shown.
Enter “0000” and press “ok” to pair the headset with your mobile phone. When the pairing iscomplete, the headset enters standby mode. (Note: If the Bluetooth version of your phone is 2.1, there is no need to enter the passkey when pairing.)
Now you can use your Bluetooth headset to listen to music, and make and receive phone calls. Some mobile phones will connect automatically to RHYTHM when restarted.

Wearing Your HeadsetThe Left / Right indicator is located on the inside of the headband. Alternatively, always wear theRHYTHM with the MFB on your right.

Using Your Headset

Answering a CallWhen you receive a call, the ring tone will be heard through the headset. Press the MFB once to accept the call, or answer the call normally via your mobile phone.

Rejecting a CallPress the MFB for 2 seconds to reject the incoming call.

Ending a CallPress the MFB once to end the call or hang up on your mobile phone.

Adjusting the VolumeTurn the volume wheel up to increase volume, and down to decrease volume. You will hear a beep when you reach the maximum or minimum volume level.

Play/Pause MusicWhen the Bluetooth headset is connected with your mobile phone, press Play/Pause once to play music. Press it once again to pause music. (Attention: your mobile phone must support A2DP profile.)

Stopping the MusicPress the “Play/Pause” for 2 seconds to stop the music.

Last TrackPress the “Last Track” key to select the last track.

Next TrackPress the “Next Track” key to select the next track.

Transferring a CallPress the “Play/Pause” button for 2 seconds to transfer the call from your headset to your mobile phone (please check if your mobile phone has this function). Repeat the procedure to transfer the callfrom mobile phone to your headset.

Connection With The Last Paired Device

When powered on, the headset will automatically connect with the last successfully paired device. Ifthe connection is successful, it enters standby mode. If the devices fail to connect within 5 minutes after the pairing has been initiated, the headset will turn off automatically.

Using the 2.5mm Stereo Music CableRHYTHM also comes with a 2.5 mm adapter cable that enables you to connect to any device with a 3.5 mm connection, like iPhone, iPad and other devices. Connect your RHYTHM with your mobile phone/music player/PC, via either bluetooth, or using the 2.5 mm music cable.

TroubleshootingIf you are unable to connect your headset and mobile phone, please try the following:

Ensure that your headset is fully charged and powered on.
Ensure that the headset is paired with your mobile phone.
Ensure that your mobile phone’s Bluetooth feature is activated. Please refer to your mobilephone user guide for specific instructions.
Ensure that the headset is within a 10 meter (30 ft.) range of your mobile phone and that thereare no obstructions, such as walls or other electronic devices, between the two.
If the above steps do not solve your problem, please remove your mobile phone battery for ashort time and recharge the headset. Repeat the troubleshooting sequence.

Safety Information

Check local laws regarding the use of mobile phones and headsets whiledriving.
If you use the headset while driving, ensure that your attention and focusremains on the road and you drive in a responsible and safe manner.
Never allow children to play with the headset, as the small parts may be achoking hazard.
Observe all signs that require an electrical device or RF radio product to beswitched off in designated areas. These could include hospitals, blastingareas, and potentially explosive environments.
Turn off your headset prior to boarding an aircraft. Do not use your headsetin an aircraft.
Never mount or store your headset over an air bag deployment area, asserious injury may result when the air bag deploys.
Do not open or mutilate the built-in battery.
Dispose of batteries according to local regulations. Do not dispose ashousehold waste

Care and Maintenance of Your Headset

Consider turning your headset off before placing it in your pocket or bag. If the MBF is accidentally activated, your mobile phone may place an unintended call. Your Bluetooth headset comes with a premium quality zippered storage pouch for your convenience.
Do not expose the headset to liquid, moisture or humidity, as it is not waterproof.
Do not use abrasive cleaning solvents to clean the headset.
Do not expose the headset to extreme temperatures. The best storage temperature range isfrom 40-80 deg F, otherwise, the life of the headset will be affected.
Do not dispose of the headset in fire as it this may result in an explosion.
Do not bring your headset into contact with sharp objects as this will cause scratches and can damage the headset.
Do not attempt to disassemble the headset, as it does not contain serviceable components.
If you do not use the headset for long periods, be sure to store it in a dry place, free from extreme temperature conditions and dust. For best protection, use the included storage pouch.

Product Specifications

Bluetooth Version: V2.1+EDRFrequency: 2400.0-2483.5 MHzBluetooth Supported: Headset, Handsfree, A2DP and AVRCPChipset: CSROperation Range: Up to 10m (30 ft.)Talk Time: Up to 10 HoursMusic Playing Time: Up to 7 hoursStand-by Time: Up to 250 hoursWeight: 127 g (4.48 oz.)

Actual performance may vary due to the user’s habits, different modes of operation, and mobile phone settings. This manual is for reference purposes only. The specifications and design of the headset may change without prior notice. Actual product may differ slightly from the image on the packaging.

Rhythm Stereo Bluetooth Headset User Manual

Thank you for choosing RHYTHM Stereo Bluetooth Headset!

Read More About This Manual & Download PDF: