MILAGROW iMap Max Pro Self Cleaning, Wet and Dry Robotic Vacuum Cleaner User Manual
1.Safety Instruction
1.1 Usage Notice
Please follow these basic safety precautions before using the product: *Read all the instructions in the manual carefully and follow the instructions to use the product. *Keep the manuals in a safe place so that you can check them later. *If you need to transfer the product to a third party, please attach the manuals along with the product. *Any operation that does not conform to instructions of the manual may result in serious personal injury or damage to the product itself.
1.2 About Product Safety Precautions
This product can only be used with the power cable and wash base delivered. Failure to do so may result in damage to the product, electric shock, or fire caused by high voltage.
If the machine, wash base and accessories of this product are found to be damaged, please do not use this product and contact our customer service department.
Please unplug the power before maintenance.
Do not touch the power plug or product when your hands are wet, or this may result in electric shock. If the power cable is damaged, it must be replaced to avoid danger.
Do not allow clothing or any part of your body (hair, fingers, etc.) to get caught in the middle brush or wheel of the machine, the mopping board leverage area, or the wash base scraper area, or this may result in personal injury.
Do not place the product near fire or near flammable, explosive, or corrosive materials.
If the manuals is missing, please contact your local dealer or call the customer service hotline for an electronic version manuals.
Precautions
This product can only be used indoors.
Do not use to vacuum sharp objects, such as glass sheets, nails, etc., in case to avoid damage to the product.
Do not use the product in a damp or flammable, explosive, corrosive environment.
Please avoid using the product in a suspended environment without a protective fence, in case to prevent the machine from in case accidentally falling and causing personal injury.
Please unplug the power adapter when the machine is left unused for a long time.
Please turn o the power when the machine will not be used for a long time, in case to avoid damage to the battery. Please use manufacturer’s original battery.
1.3 About Child Safety
Children under the age of 8 are not allowed to operate this product. Persons with physical, sensory, intellectual disabilities or lack of relevant experience and knowledge cannot clean or repair the product without any care or instructions or being unfamiliar with the hazard. Children are not allowed to play the packaging bags, or it may cause suocation.
1.4 About Battery
- This product is limited to the manufacturer’s baery.
- The battery must be removed when the machine is discarded.
- If you need to replace the battery, please contact our customer service department. If you replace the battery with the wrong model, it may cause a safety accident.
- If the battery leaks, be careful not to let the liquid stick to the skin or clothing. If so, please wipe it with a dry cloth immediately and send it to the recycling site or designated maintenance point.
- Please dispose of the old battery of the product properly. The battery contains hazardous substances that are harmful to the environment. Please follow local environmental regulations and place it at the designated recycling site.
1.5 Ground Material for Product Cleaning
The product is designed for :
Wooden floor
Ceramic tile
Short-hair carpet
2.Packing Composition
2.1 Product and Accessories
2.2 Product View
3.Installation
1. Please place the wash base on a flat floor against the wall. Before placing the wash base, please clean dust and other debris on the ground in the placing area. Press firmly on the wash base to make it attached to the ground and connect the power cable. To connect the power cable to power port of the wash base after plugging the same in power.
Note: The wash base should not be placed on the carpet. It is recommended to place it in a fixed position. Do not manually move the wash base during the cleaning process. Otherwise, the machine will not be able to find and return to the wash base .
1. Place the wash base on a flat floor against the wall. There should be no obstacle in the area of 1 meter in front of the base and 0.5 meter in both left and right sides, which may prevent the machine from returning to the wash base. 2. Connect the power cable to the wash base. Please bundle up cable which may entangle machine during its work.
4.Usage Instruction
4.1 Manual Operating
StandbyPress and hold the power button for 3 seconds until the light belt is on, the machine enters the standby status.
Automatic ChargingWhen the machine is in standby status, press the function button once to enter charging mode.
Shut DownPress and hold the power button for 3 seconds to shutdown normally, or press and hold the power button for 15 seconds to forced shutdown.
Cleaning on specific pointPress and hold the function button for 3 seconds to enter cleaning on specific point mode in-situ.
Automatic CleaningWhen the machine is in standby state, press the power button once and the machine will start to clean automatically.
Forced Power CutStab the reset hole for 3 seconds to cut power.
Tips: The product is self-routed during its work . If it is moved manually, the machine will reset route and re-clean the cleaned area. To ensure work Efficiency, please do not move the machine. This product may have a short stay during work, trying to traversing uncovered area or to reset route. Please wait patiently. How often it stops or how long it stays depends on complexity of actual home environment.
4.2 Charging
4.2.1 Charging Manually
1. Charging by using the wash base: Connect the power cable to the wash base firstly, and place the machine on the wash base for charging (the light is orange during charging).
2. Charging by using APP Firstly connect the machine to the app, then tap “back to charge” button. The machine will automatically find the wash base for charging within valid range.
Notes:
- If the machine stops working and stay away from the wash base for more than 10 minutes, it will automatically enter sleep mode.
- When the battery is lower than 5%, the machine will automatically shut down.
4.2.2 Charging Automatically
Automatic charging: When the battery is lower than 15%, the machine will automatically return for charging during its work and continue working after the battery is charged to 80%.
4.3 APP Guidance
OverviewAPP is an application developed based on Android or iOS to control added devices. This document mainly guides fresh user to operate the APP, elaborate operation steps and attentions.
APP installationDevice system requirements: Android 6.0/iOS 10+ or above. By scanning the QR code below or searching for “Venii” in Android app market or Apple Store to download and install the APP.
APP file name: VeniiWhen installation is completed in due course, you can find the corresponding indicator icon in application list.
Android/iOS compatible download code.
Connecting WiFi
- To connect WiFi 2.4G ONLY in your home.
- Additional Settings requirement for Xiaomi or Huawei brand cell phone after connecting WiFi successfully.
Xiaomi brand: Settings → WLAN Advanced Settings → turn o WLAN assistant
Huawei brand: Settings → Wireless & networks → WLAN → settings on the upper right corner → WLAN+ → turn o WLAN+
4.3.1 Add Device
Note to Xiaomi brand cell phone user:Limited by Xiaomi cell phone system, permission is needed in adding device. Please follow additional instructions below:Alternative 1: Tap “Allow Once” when dialogue box pops up in the first time, and ignore subsequent popups.Alternative 2: System settings – Permissions – APP permissions – Venii, to allow WiFi permission.
4.3.2 Main Function
5. Product Maintenance
Scan QR code to enter Milagrow official website . Check tutorial videos or download an electronic manuals. Learn how to maintain the product.
6. Technical Parameter
7. Content of Hazardous Substances in the Product
The rechargeable battery used with the product has an environmentally friendly use period of 5 years.
Warranty Card
Tips: Should you have any functional or quality issues during your use of this product, or any comments or suggestions on this product, please contact customer service hotline: +91-9953476189. We are happy to service you at best.
References
[xyz-ips snippet=”download-snippet”]