Category: MinimumRC
-
MinimumRC Macchi M5 Aircraft Kit Instructions
Macchi M5Assembly Instructions Important notification The model is supplied with UFO and 502 glue. UFO is for bonding foam parts, and 502 for bonding wood, carbon fiber, and metal parts. 502 glue will cause serious corrosion to foam parts. Please wait for the glue to dry and solidify in each installation step before the next…
-
Minimum RC J3-Cub Assembly Instruction
Minimum RC J3-Cub (foam) Assembly Instruction Thanks for purchasing this MinimumRC kit.Please read the instructions thoroughly before assembly. Cut a bevel at the hinge of the rudder surface. Assemble the fuselage. A Glue the wing girder. Glue the stabilizer. Glue the motor.(At this point, you can paste the stickers on the fuselage.) Stickers reference. Landing…
-
MinimumRC F8F-Rare Bear Pro Assembly Instructions
MinimumRC F8F-Rare Bear Pro Assembly Instructions Assemble the base. Fold hinge for many times to make the rudder surface move freely (also can be cut off and connected with transparent tape). Cut off this part.When the fuselage is combined, the screwdriver can be extended into the adjusting steering arm. Bond the fuselage, pay attention to…
-
MinimumRC B-25 Mitchell Assembly Instructions
MinimumRC B-25 Mitchell Assembly Instructions First test flight The center of gravity is 10 mm from the leading edge of the wing. Move the battery forward and backward to adjust the center of gravity. The range of elevator and aileron movement is 5 mm for each side. Please adjust the rudder surface to the level…
