MITSUBISHI ELECTRIC Split-Type Air Conditioners Instruction Manual

MITSUBISHI ELECTRIC Split-Type Air Conditioners Instruction Manual

OPERATING INSTRUCTIONS

• To use this unit correctly and safely, be sure to read these operating instructions before use.

SAFETY PRECAUTIONS

•  Since rotating parts and parts which could cause an electric shock are used in this product, be sure to read these “Safety Precautions” before use.
•  Since the cautionary items shown here are important for safety, be sure to observe them.
• After reading this manual, keep it together with the installation manual in a handy place for easy reference.
• Be sure to receive a guarantee card from your dealer and check that the purchased date and shop name, etc. are entered correctly.

Marks and their meanings

WARNING : Incorrect handling could cause serious hazard, such as death, serious injury, etc. with a high probability.CAUTION : Incorrect handling could cause serious hazard depending on the conditions.

WARNING
	Do not connect the power cord to an intermediate point, use an extension cord, or connect multiple devices to a single AC outlet. •    This may cause overheating, fire, or electric shock.
Make sure the power plug is free of dirt and insert it securely into the outlet.• A dirty plug may cause fire or electric shock.
Do not bundle, pull, or modify the power cord, and do not apply heat or place heavy objects on it.•    This may cause fire or electric shock.
Do not turn the breaker OFF/ON or disconnect/connect the power plug during operation.•    This may create sparks, which can cause fire.•    After the indoor unit is switched OFF with the remote controller, make sure to turn the breaker OFF or disconnect the power plug.
Do not expose your body directly to cool air for a prolonged length of time.•    This could be detrimental to your health.
The unit should not be installed, relocated, disassembled, altered, or repaired by the user.•    An improperly handled air conditioner may cause fire, electric shock, injury, or water leakage, etc. Consult your dealer.•    If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
When installing, relocating, or servicing the unit, make sure that no substance other than the specified refrigerant (R410A) enters the refrigerant circuit.•    Any presence of foreign substance such as air can cause abnormal pressure rise and may result in explosion or injury.•    The use of any refrigerant other than that specified for the system will cause mechanical failure, system malfunction, or unit break- down. In the worst case, this could lead to a serious impediment to securing product safety.

Meanings of symbols used in this manual

: Be sure not to do.: Be sure to follow the instruction.: Never insert your fi nger or stick, etc.: Never step onto the indoor/outdoor unit and do not put anything on them.: Danger of electric shock. Be careful.: Be sure to disconnect the power supply plug from the power outlet.: Be sure to shut off the power.

	This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
	Do not insert your finger, a stick, or other objects into the air inlet or outlet.•    This may cause injury, since the fan inside rotates at high speeds during operation.
	In case of an abnormal condition (such as a burning smell), stop the air conditioner and disconnect the power plug or turn the breaker OFF.•    A continued operation in the abnormal state may cause a malfunc- tion, fire, or electric shock. In this case, consult your dealer.
	When the air conditioner does not cool or heat, there is a pos- sibility of refrigerant leakage. In this case, consult your dealer. If a repair involves recharging the unit with refrigerant, ask the service technician for details. •    The refrigerant used in the air conditioner is safe. Normally, it does not leak. However, if refrigerant leaks and comes in contact with a heat source such as a fan heater, kerosene heater, or cooking stove, it will create a harmful gas.
The user should never attempt to wash the inside of the indoor unit. Should the inside of the unit require cleaning, contact your dealer.•    Unsuitable detergent may cause damage to plastic material inside the unit, which may result in water leakage. Should detergent come in contact with electrical parts or the motor, it will result in a malfunction, smoke, or fire.
This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial use by lay persons.

SAFETY PRECAUTIONS

CAUTION
	Do not touch the air inlet or the aluminum fins of the indoor/ outdoor unit.•    This may cause injury.
Do not use insecticides or flammable sprays on the unit.•    This may cause a fire or deformation of the unit.
Do not expose pets or houseplants to direct airflow.•    This may cause injury to the pets or plants.
Do not place other electric appliances or furniture under the indoor/outdoor unit.•    Water may drip down from the unit, which may cause damage or malfunction.
Do not leave the unit on a damaged installation stand.•    The unit may fall and cause injury.
Do not step on an unstable bench to operate or clean the unit.•    This may cause injury if you fall down.
Do not pull the power cord.•    This may cause a portion of the core wire to break, which may cause overheating or fire.
Do not charge or disassemble the batteries, and do not throw them into a fire.•    This may cause the batteries to leak, or cause a fire or explosion.
Do not operate the unit for more than 4 hours at high humidity (80% RH or more) and/or with windows or outside door left open.•    This may cause the water condensation in the air conditioner, which may drip down, wetting or damaging the furniture.•    The water condensation in the air conditioner may contribute to growth of fungi, such as mold.
Do not use the unit for special purposes, such as storing food, raising animals, growing plants, or preserving precision devices or art objects.•    This may cause deterioration of quality, or harm to animals and plants.
Do not expose combustion appliances to direct airflow.•    This may cause incomplete combustion.
Never put batteries in your mouth for any reason to avoid ac- cidental ingestion.•    Battery ingestion may cause choking and/or poisoning.
	Before cleaning the unit, switch it OFF and disconnect the power plug or turn the breaker OFF.•    This may cause injury, since the fan inside rotates at high speeds during operation.
When the unit will be unused for a long time, disconnect the power plug or turn the breaker OFF.•    The unit may accumulate dirt, which may cause overheating or fire.
Replace all batteries of the remote controller with new ones of the same type.•    Using an old battery together with a new one may cause overheating, leakage, or explosion.
If the battery fluid comes in contact with your skin or clothes, wash them thoroughly with clean water.•    If the battery fluid comes in contact with your eyes, wash them thoroughly with clean water and immediately seek medical attention.
Ensure that the area is well-ventilated when the unit is operated together with a combustion appliance.•    Inadequate ventilation may cause oxygen starvation.
Turn the breaker OFF when you hear thunder and there is a pos- sibility of a lightning strike.•    The unit may be damaged if lightning strikes.
After the air conditioner is used for several seasons, perform inspection and maintenance in addition to normal cleaning.•    Dirt or dust in the unit may create an unpleasant odor, contribute to growth of fungi, such as mold, or clog the drain passage, and cause water to leak from the indoor unit. Consult your dealer for inspection and maintenance, which require specialized knowledge and skills.

	Do not operate switches with wet hands.•    This may cause electric shock.
Do not clean the air conditioner with water or place an object that contains water, such as a flower vase, on it.•    This may cause fire or electric shock.
	Do not step on or place any object on the outdoor unit.•    This may cause injury if you or the object falls down.

IMPORTANTDirty filters cause condensation in the air conditioner which will contribute to the growth of fungi such as mold. It is therefore recommended to clean air filters every 2 weeks.

WARNING
	Consult your dealer for installing the air conditioner.•    It should not be installed by the user since installation requires spe- cialized knowledge and skills. An improperly installed air conditioner may cause water leakage, fire, or electric shock.
Provide a dedicated power supply for the air conditioner.•    A non-dedicated power supply may cause overheating or fire.
Do not install the unit where flammable gas could leak.•    If gas leaks and accumulates around the unit, it may cause an explosion.
	Ground the unit correctly.•    Do not connect the ground wire to a gas pipe, water pipe, lightning rod, or a telephone ground wire. Improper grounding may cause electric shock.
CAUTION
	Install a Ground Fault Interrupt (GFI) circuit breaker depending on the installation location of the air conditioner (such as highly humid areas).•    If the Ground Fault Interrupt (GFI) breaker is not installed, it may cause electric shock.
Ensure that the drain water is properly drained.•    If the drain passage is improper, water may drip down from the indoor/outdoor unit, wetting and damaging the furniture.

In case of an abnormal conditionImmediately stop operating the air conditioner and consult your dealer.

OPERATING INSTRUCTIONS

NAME OF EACH PART

Indoor unit

Outdoor unit

Remote controller

Only use the remote controller provided with the unit. Do not use other remote controllers.If two or more indoor units are installed in proximity to one another, an indoor unit that is not intended to be operated may respond to the remote controller.

PREPARATION BEFORE OPERATION

Before operation: Insert the power supply plug into the power outlet and/or turn the breaker on.

Installing the remote controller batteries

• Make sure the polarity of the batteries is correct.
• Do not use manganese batteries and leaking batteries. The remote controller could malfunction.
• Do not use rechargeable batteries.
• Replace all batteries with new ones of the same type.
• Batteries can be used for approximately 1 year. However, batteries with expired shelf lives last shorter.

• Press RESET gently using a thin If the RESET button is not pressed, the remote controller may not operate correctly.

Changing temperature units (°F→°C)

Unit is preset with °F.

1. Press RESET while the temperature but- tons are pressed.

• Press RESET gently using a thin instrument.
• To change temperature unit from °C to °F, press RESET

SELECTING OPERATION MODES

1.     Press to start the operation.
2. Pressto select operation mode. Each press changes mode in the following order.
3. Press to set the temperature. Each press raises or lowers the temperature by 1°F (1°C).

Press to stop the operation.• The same setting is selected the next time by simply pressing .

Operation indicator lampThe operation indicator lamp shows the operation state of the unit.

 

COOL modeEnjoy cool air at your desired temperature.Note: Do not operate COOL mode at very low outside temperatures (less than 14°F [-10°C]). Water condensed in the unit may drip and wet or damage furniture, etc.DRY modeDehumidify your room. The room may be cooled slightly. Temperature cannot be set during DRY mode.HEAT modeEnjoy warm air at your desired temperature

Emergency operation

When the remote controller cannot be used…Emergency operation can be activated by pressing the emergency operation switch (E.O. SW) on the indoor unit.

Note: The first 30 minutes of operation is test run. Temperature control does not work, and fan speed is set to High.

Auto restart function

If a power failure occurs or the main power is turned off during operation, “Auto restart function” automatically starts operation in the same mode as the one set with the remote controller just before the shutoff of the main power. When timer is set, timer setting is cancelled and the unit starts operation when power is resumed. If you do not want to use this function, please consult the service representative because the setting of the unit needs to be changed.

FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT

• Two short beeps are heard from the indoor unit when set to AUTO.

Airflow direction

  (AUTO) ….The vane is set to the most efficient airflow direction. COOL/ DRY: horizontal position. HEAT: position (5).(Manual)…For efficient air conditioning, select the upper position for COOL/ DRY, and the lower position for HEAT. If the position (4) or (5) is selected during COOL/DRY, the vane automatically moves to the upward position after 0.5 to 1 hour to prevent any condensation from dripping.(Swing)…..The vane moves up and down intermittently.To change the horizontal airflow direction. Move the vertical vane manually before starting operation.

ECONO COOL OPERATION

Press during COOL mode to start ECONO COOL operation.The unit performs swing operation vertically in various cycle according to the temperature of the airflow. Set temperature is set 4°F (2°C) higher automatically.

Press again to cancel ECONO COOL operation.

•  ECONO COOL operation also is cancelled when the VANE button is pressed.

What is “ECONO COOL”?Swing air fl ow (change of air fl ow) makes you feel cooler than constant air flow. So, even though the set temperature is automatically set 4°F (2°C) higher, it is possible to perform cooling operation with keeping comfort. As a result, energy can be saved.

TIMER OPERATION (ON/OFF TIMER)

Note:

•  ON and OFF timers can not be used in combination.
•  If power failure occurs while ON/OFF timer is set, see page 5 “Auto restart function”.

CLEANING

Instructions:

• Switch off the power supply or turn off the breaker before cleaning.
•  Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
• Do not use water hotter than 120°F (50°C).

1. Lift the front panel until a “click” is heard.
2.  Hold the hinges and pull to remove as shown in the above illustration.• Wipe with a soft dry cloth or rinse it with water.• Do not soak it in water for more than two hours.• Dry it well in shade before installing it.
3. Install the front panel by following the removal procedure in reverse. Close the front panel securely and press the positions indicated by the arrows.

Important

• Clean the fi lters regularly for best performance and to reduce power consumption.
• Dirty fi lters cause condensation in the air conditioner which will contribute to the growth of fungi such as mold. It is therefore recommended to clean air filters every 2 weeks.

WHEN YOU THINK THAT TROUBLE HAS OCCURRED

Even if these items are checked, when the unit does not recover from the trouble, stop using the air conditioner and consult your dealer.

Symptom	Explanation & Check points
Indoor Unit
The unit cannot be operated.	•  Is the breaker turned on?•  Is the power supply plug connected?•  Is the ON timer set? Page 6
The unit cannot be operated for about 3 minutes when restarted.	•  This protects the unit according to instructions from the microprocessor.Please wait.
Mist is discharged from the air outlet of the indoor unit.	•  The cool air from the unit rapidly cools moisture in the air inside the room, and it turns into mist.
The swing operation of the HORIZONTAL VANE issuspended for a while, then restarted.	•  This is for the swing operation of the HORIZON- TAL VANE to be performed normally.
The airflow direction changes during operation.The direction of the horizontal vane cannot be adjusted with the remote controller.	•  When the unit is operated in COOL or DRY mode, if the operation continues with air blowing down for 0.5 to 1 hour, the direction of the airflow is automatically set to upward position to prevent water from condensing and dripping.•  In the heating operation, if the airflow temperature is too low or when defrosting is being done, the horizontal vane is automatically set to horizontal position.
The operation stops for about 10 minutes in the heating operation.	•  Outdoor unit is in defrost. Since this is completed in max.10 minutes, please wait. (When the outside temperature is too low and humidity is too high, frost is formed.)
The unit starts operation by itself when the main power is turned on, but hasn’t received sign from the remote controller.	•  These models are equipped with an auto restart function. When the main power is turned off without stopping the unit with the remote controller and is turned on again, the unit starts operation automatically in the same mode as the one set with the remote control- ler just before the shutoff of the main power. Refer to “Auto restart function”. Page 5
The indoor unit discolors over time.	•  Although plastic turns yellow due to the influence of some factors such as ultraviolet light and temperature, this has no effect on the product functions.
Outdoor Unit
The fan of the outdoor unit does not rotate even though the compressor is running. Even if the fan starts to rotate, it stops soon.	•  When the outside temperature is low during cool- ing operation, the fan operates intermittently to maintain sufficient cooling capacity.
Water leaks from the outdoor unit.	•  During COOL and DRY operations, pipe or pipe connecting sections are cooled and this causes water to condense.•  In the heating operation, water condensed on the heat exchanger drips down.•  In the heating operation, the defrosting operation makes ice forming on the outdoor unit melt and drip down.
White smoke is discharged from the outdoor unit.	•  In the heating operation, vapor generated by the defrosting operation looks like white smoke.

Symptom	Explanation & Check points
Remote controller
The display on the remote controller does not appear or it is dim. The indoor unit does not respond to the remote control signal.	•  Are the batteries exhausted? Page 4•  Is the polarity (+, -) of the batteries correct?Page 4•  Are any buttons on the remote controller of other electric appliances being pressed?
Does not cool or heat
The room cannot be cooled or heated sufficiently.	•  Is the temperature  setting appropriate?Page 5•  Is the fan setting appropriate? Please change fan speed to High or Super High. Page 6•  Are the filters clean? Page 7•  Is the fan or heat exchanger of the indoor unit clean?•  Are there any obstacles blocking the air inlet or outlet of the indoor or outdoor unit?•  Is a window or door open?•  It may take a certain time to reach the setting temperature or may not reach that depending on the size of the room, the ambient temperature, and the like.
The room cannot be cooled sufficiently.	•  When a ventilation fan or a gas cooker is used in a room, the cooling load increases, resulting in an insufficient cooling effect.•  When the outside temperature is high, the cooling effect may not be sufficient.
The room cannot be heated sufficiently.	•  When the outside temperature is low, the heating effect may not be sufficient.
Air does not blow out soon in the heating operation.	•  Please wait as the unit is preparing to blow out warm air.
Airflow
The air from the indoor unit smells strange.	•  Are the filters clean? Page 7•  Is the fan or heat exchanger of the indoor unit clean?•  The unit may suck in an odor adhering to the wall, carpet, furniture, cloth, etc. and blow it out with the air.
Sound
Cracking sound is heard.	•  This sound is generated by the expansion/con- traction of the front panel, etc. due to change in temperature.
“Burbling” sound is heard.	•  This sound is heard when the outside air is absorbed from the drain hose by turning on the range hood or the ventilation fan, making water flowing in the drain hose to spout out. This sound is also heard when the outside air blows into the drain hose in case the outside wind is strong.
Mechanical sound is heard from the indoor unit.	•  This is the switching sound in turning on/off the fan or the compressor.
The sound of water flowing is heard.	•  This is the sound of refrigerant or condensed water flowing in the unit.
Hissing sound is sometimes heard.	•  This is the sound when the flow of refrigerant inside the unit is changed.

In the following cases, stop using the air conditioner and consult your dealer.

• When water leaks or drips from the indoor unit.
• When the upper operation indicator lamp blinks.
• When the breaker trips frequently.
• The remote control signal is not received in a room where an electronic ON/OFF type fluorescent lamp (inverter-type fl uorescent lamp, etc.) is used.
• Operation of the air conditioner interferes with radio or TV reception. An amplifier may be required for the affected device.
•  When an abnormal sound is heard.
• When any refrigerant leakage is found.

WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME

1     Set to the highest temperature in manual COOL mode, and operate for 3 to 4 hours.  Page 5

• This dries the inside of the unit.
• Moisture in the air conditioner contributes to favorable conditions for growth of fungi, such as mold.

2     Press  to stop the operation.

• Turn off the breaker and/or disconnect the power supply
• Remove all batteries from the remote plug.

When using the air conditioner again:

1     Clean the air filter. Page 7

• Check that the air inlet and outlet of the indoor and outdoor units are not blocked.

3     Check that the ground wire is connected correctly.

• Refer to the “PREPARATION BEFORE OPERATION”, and follow the Page 4

INSTALLATION PLACE AND ELECTRICAL WORK

Installation place

Avoid installing the air conditioner in the following places.

• Where there is much machine oil.
•  Salty places such as the seaside.
•  Where sulfi de gas is generated such as hot spring, sewage, waste water.
•  Where oil is splashed or where the area is fi lled with oily smoke. (such as cooking areas and factories, in which the properties of plastic could be changed and damaged).
• Where there is high-frequency or wireless equipment.
• Where the air from the outdoor unit air outlet is blocked.
•  Where the operation sound or air from the outdoor unit brothers the house next door.
•  The mounting height of indoor unit 5.9 ft. to 7.5 ft. (1.8 m to 2.3 m) is recommended. If it is impossible, please consult your dealer.

Electrical work

• Provide an exclusive circuit for the power supply of the air conditioner.
• Be sure to observe the breaker capacity.If you have any questions, consult your dealer.

SPECIFICATIONS

Guaranteed operating range

Note:

1.  The guaranteed operating range value is for 1:1 System Application.
2. If the outdoor temperature is below the lower limit of guaranteed operating range, the outdoor unitmay stop operation until the outdoor temperature exceeds the lower limit.

 

 

Read More About This Manual & Download PDF: