StreamBuds™ NanoTrue Wireless EarbudsHOW-TO GUIDE
LET’S CHECK
What’s in the box?
A pair of MIXX StreamBuds NanoTrue Wireless Earbuds | |
Portable charging case | |
3 pairs of ear cushions, small, medium, and large (S, M, L) | |
USB Type C charging cable |
LET’S START
- Left Touch Sensor
- Right Touch Sensor
- Earbud LED Lights
- Earbud Microphone
- Portable Charging Case
- USB Type C Charging Port
- Charging Case LED Light
LET’S CONNECT
Remove both of the MIXX StreamBuds Nano earbuds from the Portable charging case 5.
They will automatically pair to each other and will confirm with ‘Connected, pairing’.
Go to the Bluetooth settings on your audio device and select ‘MIXX StreamBuds Nano’ from the list.
Once paired successfully you will hear ‘Connected’ and the Earbud LED Lights 3 will flash BLUE.
You can now enjoy your music.
Placing both earbuds back in the Portable Charging Case 5 will power them off.
After this initial pairing, the earbuds will seamlessly reconnect to the last used Bluetooth audio device it was paired with and will confirm by saying ‘Connected’.
Note: If you see two ‘MIXX StreamBuds Nano’ appear on your Bluetooth menu list please wait 4 seconds for the earbuds to connect to each other before pairing with your phone.
If there is still no connection simply ‘forget’ both earbuds in your Bluetooth settings, place them back in the Portable Charging Case 5, and start again.
LET’S USE A VOICE ASSISTANT
Pair your Bluetooth device with your earbuds.Press and hold either earbud Touch Sensors 1or2 for 2 seconds.
Your Voice Assist familiar ‘beep’ will sound to confirm the connection with Siri or Google Assistant.
You can now ask Siri or Google Assistant a question or state a command.
LET’S CHARGE
The EarbudsThe StreamBuds Nano earbuds are charged using the Portable Charging Case 5.While in this case, each earbud LED Light3 will be RED, and once fully charged the LED Lights3 will turn BLUE.
Secure the earbuds by closing the lid.
The Portable Charging CaseWhen the Charge Case battery indicator shows 1 light, it is time to recharge the case battery.
Always charge the case to a suitable USB wall charger, computer USB port, or a power bank using the USB Type C charging cable supplied.When the 4 LED lights stop flashing the case is fully charged.
CONTROL FUNCTIONS
First Time PairingRemove both earbuds from the Portable Charging Case.
They will automatically pair with each other and will confirm with ‘Connected, pairing’.
Go to the Bluetooth settings on your audio device to select ‘MIXX StreamBuds Nano’ from the list.
Once paired successfully you will hear ‘Connected’.
Play/Pause/Answer/End CallShort press either earbud Touch Sensor 1 or 2.
Voice Assist ActivationPress and hold either earbud Touch Sensor 1 or 2 for 2 seconds.Listen for the familiar Voice Assist ‘beep’ then ask a question or state a command.
Power ONRemove both earbuds from the Portable Charging Case and they will automatically pair to each other and will confirm with ‘Connected’.
Power OFFPlace both earbuds back into the charging case.
LET’S BE SAFE
It’s important that you read this section completely, especially the ‘Warning, Caution and Safe Usage’ instructions.
For your protectionEnsure the product is correctly connected using the manufacturer’s original accessories included with the product.
Please keep the product out of reach from children and animals.
Do not listen to loud music for a long duration of time.
Adjust the volume to a comfortable level before listening.
Do not use the earbuds while operating machinery, including cars.
Do not use in areas where the use of hearing is required for safety.
Do not drop, short circuit, disassemble or continue to use this product and its portable charging case if damaged.
We recommendTo refer all servicing to qualified persons. Servicing may be required when the product has been damaged in any way, does not operate normally, or has been dropped.
The operating temperature range for this product is 5º – 40º celsius.
WARNING:The earbuds, the portable charging case, and the USB Type C cable connector are not water-resistant and should not be exposed to rain, moisture, splashing, or liquid spills.
This may cause excessive heat and may lead to fire damage or personal injury.
CAUTION: This product contains a Lithium battery. Incorrect disposal of this battery may result in an explosion.
LET’S RECYCLE
This product can be recycled.
Products bearing this symbol
Take the product to a collection point designated for the recycling of electronic devices.
Find out more about return and collection points through your local authority.
CONTACT US
Feedback is welcome simply email us at [email protected]or visit mixxaudio.com for more information.
SAFE USAGE INFORMATION
Do not crush, puncture or incinerate the charging case or the earbuds. Only use certified or device manufacturer’s charging cable.
SBNA-HTGO1
References
[xyz-ips snippet=”download-snippet”]