MoeBot S5/S10 App User Manual

APP User ManualMoeBot S5 | S10

APP Download and Installation

The robot mower can be remotely controlled via the mobile phone APP. Please follow the instructions below or refer to the product guide in the APP interface.

1.1. APP Download and InstallationPlease search the “smart life” in Google Play &App Store, then download and install.Or scan the QR code as below, then download and install

https://smartapp.tuya.com/smartlife

Activate Wi-Fi Mode On The Mower

• Please ensure your garden is in strong Wi-Fi signal range;
• Power on the mower;
• Setting –> Wi-Fi Setting –> Press ‘OK’ –> Update Success;
• Confirm Wi-Fi indicator light is now rapidly flashing.

Wi-Fi Indicator Light:Wi-Fi connecting standby: LED light blinking; Wi-Fi connecting successfully:LED light keeps on for 2 minutes then light off; Wi-Fi connecting unsuccessfully:LED light keeps blinking for 3 minutes then light off.

APP OPERATION

Step 1 & Step 2Open ayi robot APP, sign up and login; Then choose to add device;

Step 3Find “Small Home Appliances”, then on this category to find “Mower”:

Step 4Ensure the Wi-Fi indicator  light is now rapidly blinking;Step 5Enter Wi-Fi password according to current Wi-Fi;

Step 6Connecting;

Step 8After successful connection, you will enter operation interface.

Step 8After successful connection, you will enter operation interface.

APP FUNCTION

 Start/ Pause MowingUnder standby or mowing status, press ‘Start/ Pause’ button to start/ pause the mowing job.

Cancel MowingCancel the current mowing job under Paused status, then switch to Standby status.

RechargeUnder standby status, press ‘Recharge’ button to return mower to dock station. Under recharging status, press ‘Recharge’ button can stop the recharging job.

Spot MowUnder standby status, press ‘Spot Mow’ button to start the spot mow function. Under spot mow status, press ‘Spot Mow’ button can stop this job.

Quick AppointmentUnder standby status, press ‘Quick Appointment’ to set the working time of the mower needs to work

 Booking MowingUnder standby status, enter interface by Settings –> Booking Mowing, then the working time can be set.

report this ad

Zone MowingUnder standby status, enter interface by Settings –> Zone Mowing, then use the zone mowing function by setting the zone parameters including length and ratio.Notice:

1. The distance refers to how far the mower will go along the boundary wire before entering into the yard. The percentage refers to how often the mower will start mowing from each zone.
2. The value of distance should be 0-500m, while the percentage should be 0-100%. The sum of percentage of each zone should be 100%. Or the setting cannot be completed.