Dual Automatic Watch Winder and Storage BoxUser ManualKAWATCHWINA
Thank you for buying this product, designed to keep your watches in top condition and always wound up, ensuring many years of use.Please take a few moments to read through these instructions to ensure proper operation, and keep a copy for future reference.
Product Specifications
| Power | AC 100-240V, 50/60Hz |
| Features | Winds clockwise or anti-clockwise |
| Temperature | Operate between -19C and 45C |
| Accessories | AC Adapter |
NOTE: Please use the AC adapter supplied with the product. Remove the adapter when the winder is not in use. Always turn off the power when inserting or removing watches.
Attention
|
Please handle this product with care and inspect it regularly to ensure it is in good working order. If the product, power supply cord, or plug shows any signs of damage: stop use, unplug, and contact Kogan.com support. |
OPERATIONInsert the adaptor into the socket located on the product and plug it into an electrical outlet.1 – Rotation ModeMode 1: Operation ON/OFFMode 2: Turn clockwise. Rotate for 2 minutes and rest for 6 minutes then repeat.Mode 3: Turn counter-clockwise. Rotate for 2 minutes, then rest for 6 minutes, then repeat.Mode 4: Turn both clockwise and counter-clockwise. Rotate for 2 minutes in one direction, then rest for 6 minutes. Rotate for 2 minutes in the opposite direction and then rest for 6 minutes. Repeats above cycle.Mode 5: Turn both clockwise and counter-clockwise. Rotate for 5 minutes in one direction and then rotates in the opposite direction for 5 minutes. Repeats continuously for 3 hours, then rests for 9 hours. After the 9 hours, it will begin the above cycle again.
2 – Door SensorSome watch winders have this function. When the function is turned on, opening the cover will stop the motor from working (so you can change the watch). When you close the cover again, the motor will continue to work.
NOTE: Most watches on the market require clockwise winding. Some brands may require counter-clockwise winding or even alternating rotation. Please consult with your watch manufacturer or watch manual for further information.
ATTENTION
- When inserting and removing a wristwatch, please ensure the electrical power is off as it may cause malfunction.
- Please remove the A/C adapter when the watch winder is not in use.
- Do not place or remove a watch on the watch holder while it is moving.
- Please dispose of this product responsibly at an approved disposal or recycling facility. Do not dispose of this product in normal household waste.
- To stop the winder from rotating, turn off the power or lift the lid while the door sensor mode is on.
[xyz-ips snippet=”download-snippet”]