MONSTER CABLE RGB Strip User Manual

MONSTER CABLE RGB Strip User Manual

LARGE SPACE KIT

2 LED STRIPS & 2 LIGHT BULBSPerfect for big spaces like living rooms, media rooms, large bedrooms, or kitchens.

SMALL SPACE KIT

1 LED STRIP & 1 LED LIGHT BULB

Ideal for cozy spaces like bedrooms, offices, bathrooms, or anywhere you want to bring your world to life with color.

3-LED STRIP KIT

Everything you need to add drama to a medium to large space. Use LED strips below kitchen counters, underneath a bar, or behind your TV or desk monitor.

EXTRA LONG LED STRIP KIT

16.4-ft LED STRIP

Use this extra-long LED strip above or below cabinets, under a bar, under a bed, or in a ceilling soffit.

2 LED LIGHT BULB KIT

This kit contains two LED light bulbs and is ideal for small to medium spaces like bedrooms, offices, kitchens, or bathrooms.

STRIP EXTENSION CABLE

10-ft USB Cable and Power

Install your Monster IlluminEssence 6.5-ftLED Strips above a cabinet, in the ceiling, or other hard to reach spots with this 10-ft USB extension power cable and adapter.

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONSLighted lamp is HOT!WARNING– To reduce the risk of FIRE OR INJURY CAUTION– Use indoors only.CAUTION – Risk of Electric ShockCAUTION– Hot surface. Keep away from curtains and other combustible materials.Turn off power and allow to cool before replacing lamp. Do not touch hot lens, guard, or enclosure Keep lamp away from materials that may burn.Do not touch the lamp at any time. Use a soft cloth. oil from skin may damage lamp.Do not operate the luminaire with a missing or damaged shield.

Do not use if there is any damage to the light or cord insulation. Inspect periodically.THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.SAVE THESE INSTRUCTIONS

INSTALL LED STRIPS

Peel 3M™ adhesive mounting and press the flexible LED strip into place.

For 6.5-ft LED Strips

Plug the LED strip into the 5V USB controller cable(4ft) and then the cable into any USB port (TV or PC) or USB power supply (not included).

For 16.4-ft LED Strips

Plug the LED strip into the 12V controller (0.6ft) and then the controller into the included 12V power supply (cable lenght 4ft).

Cautions: 16.4-ft LED Strips should only be plugged into the included 12V power supply. 6.5-foot LED strips should only be plugged into 5V USB ports.

USE ONLY WITH CLASS 2 POWER UNIT

INSTALL LED LIGHT BULBS

USING YOUR REMOTE

COLOR RING

Choose the color of your lights.

BRIGHTNESS

Dim from 10% – 100%.

PRESET LIGHT PROGRAMS

Eight different auto programs for parties, lounging, and special occasions.

SPEED

Adjust program speeds faster for parties and slower for an elegant change of atmosphere.

PAIRING

By default, all Monster IlluminEssence LED strips and LEDlight bulbs will be paired out of the box with the included remote control.

TO PAIR

To pair LED strips or LED light bulbs to another remote, simply unplug and replug back in the LED strip or lamp to power and WITHIN FIVE SECONDS of plugging back into power, press and hold the “Speed+” until the lights blinkthree times.

TO UNPAIR

Repeat above but instead of “Speed+” press “Speed-”.

EXPAND

EXPAND LIGHTS AND ROOMSYou can pair up to four remotes with up to 30 Monster IlluminEssence LED strips or LED light bulbs.

You can have multiple remotes control the same set of lights. You can also have different sets of lights paired to different remotes to control rooms independently.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

The Responsible (located within the United States) party information:Company Name: Monster, Inc. Address: 601 Gateway Blvd. Floor 9 Suite 900,South San Francisco, CA 94080, USA. Telephone Number: 415-840-2000Email: [email protected]The name and model number of the product:

Model Number	Model Name
190712-00	6.56FT 5V RGB Strip & 5V RF Strip Controller
190713-00	16.4FT 12V RGB Strip & 12V RF Strip Controller
190714-00	7W RGB Bulb
190715-00	RF 2.4GHz Remote
SAW30-120-2000U	Power Supply

GET INSPIRED

Subscribe to our Pinterest boards to learn all the cool things you can do with Monster IlluminEssence.

For Ideas and Inspirationwww.pinterest.com/monsterilluminessence

GET HELP

FOR TECHNICAL SUPPORT GO TO:www.monsterstore.com/pages/contact-us  OR CALL: 1 (877) 800-8989www.youtube.com/monsterilluminessence For Instructional Videos

 

MONSTER CABLE RGB Strip User Manual – MONSTER CABLE RGB Strip User Manual –