motorola Lightweight Headset with Swivel Boom RMN5058 User Guide
Foreword
Product Safety and RF Exposure Compliance
Caution
Before using this product, read the operating instructions for safety usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.
ATTENTION!
The Lightweight Headset with Swivel Boom Microphone, when attached to the radio, is restricted to occupational use only to satisfy FCC RF energy exposure requirements.Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio to ensure compliance with RF energy exposure limits.
DESCRIPTION
The RMN5058 Lightweight Headset with Swivel Boom Microphone can be used to help maintain privacy in twoway radio conversations. This lightweight accessory is useful when high noise levels prevent the operator from hearing sound out of the radio speaker. Additionally, this headset facilitates hands-free use of the radio. The RMN5058 includes an in-line Push-To-Talk (PTT) switch for easier PTT access.
Wearing the Headset
To minimize interference and optimize headset performance, wear the radio and headset so that the accessory cord will not cross over or touch the antenna.The headset fits comfortably over the head and can be adjusted to fit most head sizes. The headset speaker can rest over the right or left ear. For hygiene reasons, it is recommended that each headset user have and use his/ her own speaker foam earpads. (See SERVICE section for Motorola earpad part number.)
OPERATION
Attaching the Headset to the Radio
- Turn the radio off.
- Remove the side connector cover from the side of the radio, attach the headset connector to the radio, and tighten the thumbscrew to secure the connection.
- Turn the radio on and adjust audio volume to a comfortable listening level.
Receiving
When the headset is connected to the radio accessory connector, the radio speaker is muted, and the audio is only heard from the headset speaker.
Transmitting
When using the RMN5058 Lightweight Headset (with in-line PTT), push the PTT switch on the cable to transmit.
Note: The RMN5058 is compatible with the Internal VOX option in the radio, if the radio is VOX equipped.
Removing the Headset
Turn the radio off before removing the headset from the radio side connector. Remember to reattach the radio side connector cover when an accessory is not being used.
SERVICE
Other than replacing the Foam Earpad and Microphone Cover (Motorola part number RLN6283), the RMN5058 Lightweight Headset cannot be repaired. Order replacement headsets as required.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2006 and 2021 Motorola Solutions, Inc. All rights reserved.
[xyz-ips snippet=”download-snippet”]