MTP6650QUICK START GUIDE
Controls and Indicators
- Antenna
- Side Connector
- External Antenna Connector
- Rotary Knob
- LED Status Indicator
- Programmable Side Button
- Push-To-Talk Button (PTT)
- Soft Keys
- Sand Key
- Speaker
- Bottom Microphone
- Bottom Connector
- Emergency Button
- Earpiece
- Top Microphone
- Display
- Menu Key
- On/Off/End/Home Key
- Navigation Key
- Backlight Sensor
- Alphanumeric Keypad
* The LED indication and flashing pattern can be configured in the Customer Programming Software (CPS).
LED Status Indicator
Battery Capacity Information
Getting Started
Installing the Battery
Insert the battery into the compartment.Slide the battery towards the top of the radio until it clicks.
Attaching the Antenna
Turn the radio off before attaching the antenna.Align the bottom of the antenna and the screw-in base on the top of the radio.Turn clockwise until snug. Do not force.
Unlocking the RadioYour radio may be locked at power on. To unlock the radio after powering on, enter the code at the prompt.The unlock code is set to 0000 by default. Your service provider may change this number before you receive your radio.
Unlocking/Locking KeysTo unlock/lock the keypad, press the Menu key and then the * key.Holding Your RadioThe radio has two microphones:
- A top microphone for Simplex group, dispatcher, or private calls
- A bottom microphone for Duplex, telephone-like calls.When making Duplex calls (low audio), hold your radio as you would a telephone. Speak into the bottom microphone. Listen via the earpiece. Keep the antenna at least 2.5 centimeters from your head and body.
When making Simplex calls (high audio), hold your radio in a vertical position with the top microphone 5 to 10 centimeters away from your mouth. Speak into the top microphone. Listen via the radio internal speaker. Keep the antenna at least 2.5 centimeters from your head and body.
Looking After Your RadioNever leave your radio or battery in extreme temperatures (over +85 °C). For example, behind a windscreen in direct sunlight.The radio is submersible (compliant with the IP67 standard), but only with the battery and antenna attached.To clean your radio, use a moistened or antistatic cloth.
Icons
Using the Terminal
Turning the Radio On/OffTo turn the radio on/off, press and hold the On/Off key.Using the Radio MenuTo enter the menu, press the Menu key.To scroll through the menu, press the Up or Down Navigation key.To select a menu item, press Select or the Right Navigation key.To return to the previous level, press Back or the Left Navigation key.To exit the menu, press the Home key.Selecting Trunked/Direct Mode OperationFrom the home screen, select Options and then Trunked Mode or Direct Mode.Making TMO/DMO Group CallsEnter TMO or DMO. From the home screen, use the Navigation keys or Rotary Knob to highlight the targeted talk group. Press Select (if configured). Press and hold PTT. Wait for the talk permit tone (if configured) and talk. Release PTT to listen.Making TMO/DMO Emergency Group CallsEnter TMO or DMO. Press and hold the Emergency button. The emergency alarm is sent automatically (if configured). Press and hold PTT. Wait for the talk permit tone (if configured) and talk. Release PTT to listen.
If using the Hot Mic feature, wait for the Emergency Mic On message to appear on the display, then talk without pressing PTT.To exit Emergency Mode, press and hold the Exit soft key.Making Simplex Private CallsIN DMO: From the home screen, dial a number. Press and hold PTT to make the call.Wait for the talk permit tone (if configured) and talk. Release PTT to listen. Press the End key to terminate the call.IN TMO: From the home screen, dial a number. Press and release PTT to make the call. Wait for the called party to pick up. Once the call is connected, press and hold PTT to talk (wait for the talk permit tone if configured). Release PTT to listen. Press the End key to terminate the call.Making Duplex Private Call/Phone/PABX CallsFrom the home screen, dial a number. Press and release the Send key. The ring tone sounds. The called party answers. Press the End key to terminate the call.Sending Status MessagesFrom the home screen, press the Menu key. Select Messages → Send Status.Perform one of the following actions.
- Highlight the required status message. Press Select, the Send key, or PTT.
- If the status list is empty, enter a 5-digit status message number and press Send.
More Information on the RadioVisit the Motorola Solutions Web site at:http://www.motorolasolutions.com/Learning Experience PortalUser documentation available at:https://learning.motorolasolutions.com/Open Source Software Legal NoticesAvailable in Customer Programming Software Plus (CPS Plus) DVD
This document is copyright protected. Duplications for the purpose of the use of Motorola Solutions products are permitted to an appropriate extent. Duplications for other purposes, changes, additions, or other processing of this document are not permitted. Only this electronically-saved document is considered to be the original. Duplications are considered merely copies. Motorola Solutions, Inc. and its subsidiaries and affiliates do not vouch for the correctness of such kinds of copies.MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.© 2017 and 2021 Motorola Solutions, Inc. All rights reserved.
References
[xyz-ips snippet=”download-snippet”]