motorola PMLN6428/HKLN4509 Bluetooth Pod Charging Cradle Instructions

en-US

MOTOROLA, MOTO, MOTOROLA SOLUTIONSand the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.© 2012 and 2020 Motorola Solutions, Inc.All rights reserved.Printed inEU Contact: Motorola Solutions, Czerwone Maki 82, 30-392 Krakow, Poland

IMPORTANT SAFETY INSTRUCTIONS

This document contains important safety and operating instructions. Please read these instructions carefully and save them for future reference.Before using the Charging Cradle, read all the instructions and cautionary markings.

1. To reduce the risk of injury, insert only the Motorola Bluetooth Pod (PMLN6396/ HKLN4512) into the cradle 032374o WARNING for charging.
2. Use of any devices not recommended by Motorola may result in a risk of fire, electric shock, or injury.
3. To reduce the risk of damage to the power supply cord, pull the plug rather than the cord when disconnecting the power supply from the cradle.
4. An extension cord should not be used unless absolutely necessary. Use of an improper extension ord could result in a risk of fire and electric shock. if an extension cord must be used, make sure that the cord size is 18 AWG for lengths up to 6.5 feet (2.0 M) and 16 AWG for lengths up to 9.8 feet (3.0 M).
5. To reduce the risk of fire, electric shock, or injury, do not operate the cradle if it has been broken or damaged in any way. Take it to a qualified Motorolaservice representative.
6. Do not disassemble the cradle; it is not repairable and replacement parts are not available. Disassemble of the cradle may result in a risk of electrical shockor fire.
7. To reduce the risk of electric shock, unplug the transformer from the AC outlet before attempting any maintenance or cleaning.

OPERATIONAL SAFETY GUIDELINES

1. Turn the Pod OFF before inserting it in the cradle for charging.
2. The charging cradle is not suitable for outdoor use. Use only in dry locations/ conditions.
3. Connect the power supply for the cradle only to an appropriate fused and wired supply of the correct voltage (as specified on the power supply).
4. Maximum ambient temperature around the power supply must not exceed 40 °C (104 °F).
5. Make sure that the cord is located where it cannot be stepped on, tripped over, or subjected to water damage or stress.

IMPORTANT: For assuring proper operation DO NOT power ON the Pod while charging.

MOTOROLA AUTHORIZED POWER SUPPLIES

For more information about this product, please contact your Motorola Authorized Dealer or visit us at:http://www.motorola.com/Business/US-EN/Business+Product+and+Services/Accessories/Two-Way+Radio+Accessories/Wireless+Bluetooth+Accessories

References

• 
  error – Motorola
• 
  error – Motorola