MOTOROLA TALKABOUT Two-Way Radio T2XX Series User Manual

TALKABOUT Two-Way Radio T2XX Series

m TALKABOUT ® TWO-WAY RADIOT2XX SERIES*MN002392A01*MN002392A01-AGMOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC, and are used under license. All other trademarks are the property of their respective owners. © 2016 and 2021 Motorola Solutions, Inc. All rights reserved. Printed inSafety and General InformationCautionBefore using this radio, read this booklet that contains important operating instructions. For information on product details, brochures, user manuals, and approved accessories. Please refer to www.motorolasolutions.com.Compliance with RF Exposure StandardsNational and international regulations require manufacturers to comply with the RF energy exposure limits for portable two-way radios before they can be marketed. Your Motorola Solutions two-way radio is designed, manufactured, and tested to comply with all applicable national and international regulations for human exposure to radio frequency electromagnetic energy.RF Energy Exposure Awareness and Control Information and Operational Instructions for General Population and Uncontrolled Environment UseFor more information on what RF energy exposure is, see the following websites: · https://www.fcc.gov/ · http://www.who.int/peh-emf/project/en/ · http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11467.html · http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html For additional information, see https:// www.motorolasolutions.com/en_us/about/company-overview/ corporate-responsibility/governance-and-policies.html.Class B Digital DeviceFor a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.Operating Instructions· Transmit no more than 50 % of the time. To transmit (talk), press the Push-To-Talk (PTT) button. To receive calls, release the PTT button.· Hold the radio in a vertical position in front of the face with the microphone (and other parts of the radio including the antenna) at least 1 in. (2.5 cm) away from the nose or lips. Antenna should be kept away from the eye.

· When worn on the body, always place the radio in a Motorola Solutions-approved clip, holder, holster, case, or body harness for this product.· DO NOT hold the antenna when the radio is transmitting. · DO NOT use any portable radio that has a damagedantenna. If a damaged antenna comes into contact with your skin, a minor burn can result. · To ensure continued compliance with applicable RF exposure limits, use only Motorola Solutions-approved, supplied or replacement antennas, batteries, and accessories. · For a list of Motorola Solutions-approved accessories please refer to your user manual or visit www.motorolasolutions.com

Acoustic Safety

Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the volume of the radio, the sooner your hearing will be affected. Hearing damage from loud noise is sometimes undetectable at first, and can have a cumulative effect. To protect your hearing, follow these precautions: · Use the lowest volume necessary to do your job. · Turn up the volume only if you are in noisy surroundings. · Turn down the volume before putting on a headset orheadphones. · Limit the amount of time you use a headset orheadphones at high volume. · When using the radio without a headset or headphones,do not place the speaker of the radio directly against your ear.

Medical Devices

If you use a personal medical device, such as a pacemaker or hearing aid, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.

Operational Warnings

The following explains the operational warnings: For Vehicle With Air Bags

Warning:

· Refer to vehicle manufacturer’s manual

prior to installation of electronic equipment

to avoid interference with air bag wiring.

· DO NOT place a portable radio in the area

!

over an air bag or in the air bag deployment area. Air bags inflate with great force. If a

WARNING

portable radio is placed in the air bag deployment area and the air bag inflates,

the radio may be propelled with great force

and cause serious injury to occupants of the

vehicle.

Potentially Explosive Atmospheres

Warning: · Do not carry a radio that is not certified for

Hazardous Locations into a potentially

explosive atmosphere. It could result in a

serious injury or death. You should only use

a radio certified for hazardous locations in

potentially explosive atmospheres.

· Explosive atmospheres refer to hazard

classified locations that may contain

hazardous gas, vapors, dusts, such as

!

fueling areas below decks on boats, fuel or chemical transferor storage facilities, and

WARNING

areas where the air contains chemicals or particles such as grain, dust or metal

powders. Areas with potentially explosive

atmospheres are often, but not always,

posted.

· DO NOT remove, install, or charge batteries

in such areas, or remove or install

antennas. Sparks in a potentially explosive

atmosphere can cause an explosion or fire

resulting in bodily injury or even death.

Blasting Caps and Blasting Areas

Warning: To avoid possible interference with

blasting operations, turn off your radio when you

!

are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.”

W A R N I N G Obey all signs and instructions.

Batteries

Use only Motorola Solutions approved batteries. Risk of explosion if the battery is replaced by an incorrect type.

· Charge your battery using the approved Motorola Solutions charger.· Use the battery in accordance with its water and/or dust Ingress Protection (IP) rating.· Do not discard your battery into a fire. · Do not replace the battery in any area labeled “HazardousAtmosphere”. · Do not disassemble, crush, puncture, shred, or otherwiseattempt to change the form of your battery. · Do not dry a wet or damp battery with an appliance or heatsource, such as a hair dryer or microwave oven.

· Do not allow conductive material such as jewelry, keys, or beaded chains to touch exposed battery terminals.Safety Instruction for Power Supply1. The power supply is for use with equipment according to IEC/EN/UL 62368-1/60950-1.2. The power supply is for indoor use in dry locations. 3. The equipment should be connected to a nearby andeasily accessible socket outlet. 4. If the power supply is damaged or defective, do not repairor use the power supply. 5. For more details, please refer to https://www.motorolasolutions.com/en_xu/support/emeacompliance.html#phnav_other-products.Do Not Substitute Options or AccessoriesThe Motorola Solutions communications equipment certified as intrinsically safe by the approving agency (FM, UL, CSA, CENELEC) is tested as a complete system which consists of the listed agency approved portable, approved battery, and approved accessories or options, or both. This approved portable and battery combination must be strictly observed. There must be no substitution of items, even if the substitute has been previously approved with a different Motorola Solutions communications equipment unit. Approved configurations are listed by the approving agency (FM, UL, CSA, CENELEC). The Intrinsically Safe Approval Label affixed to radio refers to the intrinsically safe classification of that radio product, and the approved batteries that can be used with that system. The manual PN referenced on the Intrinsically Safe Approval Label identifies the approved accessories and or options that can be used with that portable radio unit. Using a non-Motorola Solutions-intrinsically safe battery and/or accessory with the Motorola Solutions-approved radio unit will void the intrinsically safe approval of that radio unit.European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) DirectiveThe European Union’s WEEE directive requires that products sold into EU countries must have the crossed out trash bin label on the product (or the package in some cases). As defined by the WEEE directive, this cross-out trash bin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection system in their country.Notice to Users (FCC and ISED)This device complies with Part 15 of the FCC rules and ISED’s license-exempt RSS’s per the following conditions: · This device may not cause harmful interference. · This device must accept any interference received,including interference that may cause undesired operation.Supplier’s Declaration of ConformitySupplier’s Declaration of Conformity Per FCC CFR 47 Part 2 Section 2.1077(a)Responsible Party Name: Motorola Solutions, Inc. Address: 2000 Progress Pkwy, Schaumburg, Il. 60196. Phone Number: 1-800-927-2744 Hereby declares that the product:Model Name: T200, T260, T200TP, T260TP, T265, T280, T261CA, T261TP, T261TPG, and T260TPG. conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d), and section 15.109(a).Licensing InformationUSA (FCC)/CANADA (ISED)According to FCC Part 95, FRS devices do not require a license. Use of Motorola radio in Canada is subject to the rules and regulations in ISED RSS 210 and do not require a license.Changes or modifications not expressly approved by Motorola Solutions may void the user authority granted by the FCC or ISED to operate this radio and should not be made. To comply with FCC or ISED requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc) not authorized by the FCC or ISED equipment authorization for this radio could violate FCC or ISED rules.Note: Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.

Uruguay Use of GMRS frequencies is subject to the Rules and Regulations of the Regulatory Unit Communications Services (URSEC). URSEC requires that all operators using GMRS frequencies obtain a permit before operating their equipment. The authorization shall depend on the channel availability at the time the authorization is requested. To obtain a permit from URSEC, consult your local URSEC office for more information: www.ursec.gub.uy.Mexico, Panama, and Paraguay Mexico, the Republic of Panama and Paraguay do not require authorization to use FRS radio equipment frequencies.Chile Servicio de Banda Local UHF frequency use is subject to SUBTEL Resolution 1.261 and Resolution 52 Exenta. A license is required for use in Chile. To obtain a Banda Local end-user license:1. Fill out the required application form to request Local Band service. a. It is available on the SUBTEL website: http://www.subtel.gob.cl/ index.php?option=com_ content&view =article&id=1388&Itemid=2087 b. It is also available at the SUBTEL offices: Subsecretaría de Telecomunicaciones Unidad de Licencias y Permisos Lorenzo Gotuzzo N°124, piso 6 Santiago, Chile Tel. (56-2) 421 3634 2. Present this form with your ID at the above location. 3. Consult the SUBTEL offices for applicable fees. For more information, consult SUBTEL at www.subtel.cl or call their offices at the telephone number listed above.Colombia Operacion itinerante de baja potencia frequency use is subject to CRC Resolución 002190 de 2003. No license is required for use in Colombia. Consult CRC at www.crcom.gov.co for more information.Peru Colectivo Familiar frequency use is subject to MTC RVM 388-200-MTC/15.03 and FCC (FRS), Part 95B. No license is required for use in Peru. Consult MTC Peru at www.mtc.gob.pe for more information.Argentina Uso Familiar frequency use is subject to CNC Resolution SC No. 2750/98. No license is required for use in Argentina. Consult the AFTIC at http://www.aftic.gob.ar/ for more information.Brazil The frequency general use is subject to the Annex to Resolution 506 Section XIV – Radio Communication Equipment General Purpose. It is not required use license in Brazil. See the ANATEL site for more information: http://www.anatel.gov.br/ Portal/exibirPortalInternet.doControl ButtonsAccessory Port

Push-to-Talk Power On/Off/MODEMode Switch Menu/LockSpeaker Micro-USB Charging Port

ScreenScan/Monitor Call Tone Microphone

Display Screen Guide

Numbers for ChannelNumbers for Codes, Call ToneCall Tone Keypad Tone Roger Tone Mute iVOX / VOX

Battery MeterWeather AlertStatus (transmit/ receive) ScanLock

Getting Started

Installing the Batteries

Discard the retailer tag (loose in one of the battery compartments), before installing batteries.

Each radio can use either 1 NiMH rechargeable battery pack or 3 AA alkaline batteries and beeps when the batteries are low.

Installing the NiMH Rechargeable Battery Pack (Optional Accessory)

1. Take the belt clip off. 2. With the back of the radio facing you, lift the battery coverlatch up and remove the cover. 3. Insert the NiMH battery pack by following the instructionon the battery pack. (The ribbon must be underneath the battery pack and must wrap around the right side of the pack for easy removal). 4. Close the battery cover firmly.

Installing the Three AA Alkaline Batteries

1. Take the belt clip off. 2. With the back of the radio facing you, lift the battery coverlatch up and remove the cover. 3. Insert the three AA Alkaline batteries with + and ­ polarityas shown inside. (The ribbon must be underneath the AA alkaline batteries and must wrap around the right side of the batteries). 4. Close the battery cover firmly.

Radio Battery Meter

The radio battery icon shows the battery charge level, from full

to empty

. When the radio has one segment left,

the radio chirps periodically or after releasing the PTT button

(Low Battery Alert).

Removing the NiMH Battery Pack

1. Turn the radio off. 2. With the back of the radio facing you, lift the battery coverlatch up and remove the cover. 3. Remove the NiMH battery pack by pulling the ribbonattached to the radio. 4. Close the battery cover firmly.Removing the Three AA Alkaline Batteries

1. Turn the radio off. 2. With the back of the radio facing you, lift the battery coverlatch up and remove the cover. 3. Gently remove each alkaline battery by pulling the ribbonattached to the radio. 4. Close the battery cover firmly.

Note:

· Exercise care when removing NiMH or AA batteries. Do not use sharp or conductive tools to remove either of these batteries.· Remove the batteries before storing your radio for extended periods of time. Batteries corrode over time and may cause permanent damage to your radio.

Battery Capacity Maintenance

1. Charge the NiMH batteries once every 3 months when not in use.2. Before placing the radio in storage, remove the battery. 3. Store the NiMH batteries in temperature between -20 °C to35 °C and in low humidity. Avoid damp conditions and corrosive materials.

Using the Micro-USB Charger

The micro-USB charger is a handy port that allows you to conveniently charge your NiMH battery pack. 1. Make sure your radio is turned OFF. 2. Plug the micro-USB cable into the micro-USB chargingport on your radio. 3. Connect the USB charger to a nearby and easilyaccessible wall power outlet. 4. An empty battery will be fully charged in 12 hours. 5. The battery meter on LCD will move to indicate the batteryis charging.

Note: · When moving between hot and cold temperatures, do notcharge the NiMH battery pack until the battery temperature acclimates (usually about 20 minutes). · For optimal battery life, remove the radio from the charger within 16 hours. Do not store the radio while connected to the charger.Attaching and Removing the Belt Clip1. Attach the belt clip to the back of the radio until the clip clicks in place.2. Attach the belt clip to pocket or belt strap until the clip clicks in place.To Remove1. Push the release tab on top of the belt clip to release the latch.2. Pull the belt clip away from the back of the radio.Turning your Radio On and Off

1. Press and hold on the MODE button to turn your radio ON/OFF. In the ON position, the radio chirps and briefly shows all feature icons available on the radio. 2. The display screen then shows the current channel, code and all features that are enabled. The radio is in Two-Way mode.

Setting the Volume

Press and hold for three seconds to listen to volume level.

1. First press either or to trigger volume change. You will see current volume level on screen.

2. Press to increase the volume. Press the volume.

to decrease

3. When the volume reached level 0 the mute icon appears permanently on screen.Do not hold the radio close to your ear. If the volume is set to an uncomfortable level, it could hurt your ear.

Talking and Listening

To communicate, all radios in your group must be set to the same channel and Interference Eliminator Code. 1. To talk, press and hold the PTT button. When transmitting,

icon blinks (only on radio with weather

mode feature) and is shown. 2. When you are finished talking, release the PTT button.

3. When receiving,

icon blinks (only on radio

with weather mode feature) and is shown. For maximum clarity, hold the radio one inch away from your mouth and speak directly into the microphone. Do not cover the microphone while talking.

Talk Range

Your radio is designed to maximize performance and improve transmission range. Do not use the radios closer than five feet apart.

Monitor Button

Pressing and holding for three seconds allows you to listen to the volume level of the radio when you are not receiving. You

can also press to check for activity on the current channel before you talk.Push-to-Talk Timeout Timer

To prevent accidental transmissions and save battery life, the radio emits a continuous warning tone and stops transmitting if you press the PTT button for 60 continuous seconds.Mode Button (Only on Radio with Weather Mode Feature)

By pressing “mode” button, the user will be seamlessly switching between two-way and weather mode. When radio is in

two-way mode,

will be shown. When radio is in

weather mode,

will be shown. Corresponding

setting and information will be shown on the LCD.

Menu Options

Selecting the Channel

Each country model has different number of channels and frequencies. See the “Channels and Frequencies” table on overleaf for details.

1. With the radio on, press number starts to flash.

one time until the channel

2. Press or and select an unused or quiet channel.

An extended press of

or

allows you to scroll

through the channels rapidly.

3. Press the PTT button to save the channel setting and exit

menu or to continue set up.

Selecting the Interference Eliminator Code

Interference Eliminator Codes help minimize interference by blocking transmissions from unknown sources. Your radio has 121 Interference Eliminator Codes. Codes 1 ­ 38 are standard analog codes that appear on other FRS/GMRS radios. Codes 39 ­ 121 are additional digital codes added for superior interference protection. 0 is the off position, no analog or digital codes are enabled.

To set the code for a channel:

1. Press two times until the code starts to flash.2. Press or to select the code. 3. Press the PTT button to save the code setting and exitmenu or to continue set up. You can set a different code for each channel using thisprocedure. An extended press of or allows you to scroll through the Interference Code rapidly so you can quickly reach the code you want.Note: On a radio that uses Interference Eliminator Codes, the code must be set to 0 to communicate with radios that do not have Interference Eliminator Codes. Select 0 for “no tone, no code” on the display of your radio.Setting and Transmitting Call Tones

Your radio can transmit different call tones to other radios in your group so you can alert them that you want to talk. Your radio has 20 call tones from which to choose. To set a call tone:1. Press three times until appears. The current call tone setting will flash.2. Press or to change and hear the call tone. 3. Press the PTT button to set the new call tone and exitmenu or to continue set up. To transmit your call tone to other radios set up to the same channel and Interference Eliminator Code as your radio, press.Note: Setting the call to OFF disables the call tone feature.Hands-Free Use Without Accessories ( )Note: iVOX feature is not available on model T200.

You can use the

feature to transmit hands-free without

the need for any headset accessories. Once

is turned on,

the radio detects your voice and transmits when you speak into

the internal microphone.

1. Press four times until

appears on the display.

The current setting will flash.

2. Press or to select Off or set sensitivity L1, L2 or L3.

3. Press the PTT button to set and exit menu or to continue set up.

Hands-Free Use with Accessories ( )

Note: VOX feature is not available on model T200.

You can transmit hands-free more reliable with the use of

optional

headset accessories. Once

is turned on,

the radio detects your voice and transmits when you speak.

Many accessories (sold separately) are available for your radio.

For more information, visit our website at

www.motorolasolutions.com/TalkaboutAccessories or call

customer service.

1. Plug the

accessory into the accessory port. Press

four times until

appears on the display. The

current setting will flash.

2. Press or to select Off or set sensitivity L1, L2 or L3.

3. Press the PTT button to set and exit menu or to continue set up.4. Lower the volume before placing the accessory on your head or in your ear.

5. To turn off

, simply remove accessory.

6. When

accessory is connected, only accessory

microphone is functional. Pressing PTT on radio will also

allow user to transmit via accessory microphone.

Note: There is a short delay between the time you start talking and when the radio transmits. There is a short delay before the transmission is completed.

Setting the Sensitivity Level When in

/

Mode

Adjusting the sensitivity level of the radio helps minimize the possibility of unintended noises triggering a transmission and helps the radio pick up soft voices.

L3 = High Sensitivity for quiet environments L2 = Medium Sensitivity for most environments L1 = Low Sensitivity for noisy environments

Keypad TonesYou may enable or disable the speaker key tones. You will hear the key tone each time a button is pushed.1. Press five times (four times on model T200) until appears. The current setting On/Off will flash.2. Press either or to turn On or Off.3. Press the PTT button to confirm and exit menu or to continue set up.Note: When the key tone feature is off, the following are not disabled:

· Transmit timeout alert tone · Call tone · Low battery alert tone or · The transmitted talk confirmation tone

Transmitting a Talk Confirmation Tone

You can set your radio to transmit a unique tone when you finish transmitting. It is like saying “Roger” or “Over” to let others know you are finished talking.

1. With the radio on, press

six times (five times on

model T200) until the appears. The current setting On/ Off flashes.

2. Press or to turn On or Off. 3. Press the PTT button to set and exit menu.

Special Features

Keypad Lock To avoid accidentally changing your radio settings:

1. Press and hold until displays. 2. When in lock mode, you can turn the radio on and off,adjust the volume, receive, transmit, send a call tone and monitor channels. All other functions are locked.

3. To unlock the radio, press and hold longer displayed.Scanning Channels

until is no

Use scan to search all channels for transmissions from unknown parties, to find someone in your group who has accidentally changed channels or to quickly find unused channels for your own use.To start Scanning:

1. Briefly press the key. The scan will appear in the display and the radio will begin to scroll through the channel and code combinations.2. When the radio detects channel activity matching the channel and code combination, it stops scrolling and you can hear the transmission.3. To respond and talk to the person transmitting, press the PTT button within five seconds after the end of the transmission.4. The radio will resume scrolling through the channels five seconds after the end of any received activity.5. To stop scanning, briefly press the key.Scanning Notes:

1. If you press the PTT button while the radio is scrolling through inactive channels, the transmission will be on the “home channel”. Scanning will resume five seconds afterthe end of your transmission. You may press the key to stop scanning at any time. 2. If the radio stops on an undesired transmission, you mayimmediately resume the scan by briefly pressing or. 3. If the radio repeatedly stops on an undesiredtransmission, you may temporarily remove that channelfrom the scan list by pressing and holding or for three seconds. You may remove more than one channel in this way. 4. To restore the removed channel(s) to the scan list, turn the radio off and then turn back on, or exit and re-enter the scanning mode by pressing .

5. You cannot remove the home channel from the scan list.Weather Receiver

Note: Weather feature is not available on model T200. Weather feature is available on model T260 designed for use in USA and Canada.Your radio can tune in to broadcasts by the United States National Oceanic and Atmospheric Administration (NOAA) Weather Radio and Environment Canada Weather Radio. You can listen to a weather channel (see “Weather Channels and Frequencies” table for details) or set your radio to alert you to emergency weather broadcasts that interrupt routine broadcasts. When you listen to a weather channel, you cannot use your radio in scan mode or for two-way communications. Both NOAA and Environment Canada have transmitters located throughout the United States and Canada, respectively. These transmitters broadcast watches, forecasts and other information 24 hours a day.Note: NOAA weather radio stations are assigned to cover specific areas and service may be limited. Please check with your local weather office for frequency and details or visit www.weather.gov/nwr in the US to view the appropriate transmitter for your area. The use of the NOAA logo does not provide an endorsement or implied endorsement by the National Weather Service of NOAA, nor does the use of the Weatheradio logo provide an endorsement or implied endorsement by Environment Canada.

Entering Weather Mode1. From two-way mode, press MODE to enter weather mode .

Setting the Weather Channel

Your radio receives weather frequencies:

1. In weather mode, press channel number flashes.

one time until weather

2. Press or to select the appropriate channel with good reception in your area.

3. Press the PTT button to set and exit menu or

to

continue set up weather alert.

Setting the Weather Alert

Your radio can be set to respond to NOAA Weather Radio emergency messages. A special alarm tone sounds an alert and turns on the weather receiver to give you immediate weather and emergency information.

1. In weather mode press twice until

displays.

2. Press or to select On/Off.

3. Press the PTT button or up.

to exit the weather menu set

4. Press MODE to return to two-way mode. If you activate

Weather Alert and return to two-way mode

will

display.

Note: When the weather channel is activated, either manually or after receiving an alert, and no buttons are pressed for 5 minutes, the weather mode will automatically revert back to two-way mode.

As with two-way radio reception, weather channel reception depends on how close you are to a transmitter and whether you are indoors or outdoors. Because weather channels are transmitted without codes, they may contain static or noise. Weather Alert will not function while actively transmitting or receiving in two-way mode.

Weather Channels and Frequencies

Weather Channel WX1 WX2 WX3 WX4 WX5 WX6

Frequency 162.550 MHz 162.400 MHz 162.475 MHz 162.425 MHz 162.450 MHz 162.500 MHz

Weather Channel WX7 WX8 WX9 WX10 WX11

Frequency 162.525 MHz 161.650 MHz 161.775 MHz 161.750 MHz 162.000 MHz

Channels and FrequenciesUSA, Canada, Mexico, Panama, Paraguay, Uruguay

Channel

Frequency

Max Power Output

Channel

Frequency

Max Power Output

1 462.5625 MHz

2 W

12 467.6625 MHz 0.5 W

2 462.5875 MHz

2 W

13 467.6875 MHz 0.5 W

3 462.6125 MHz

2 W

14 467.7125 MHz 0.5 W

4 462.6375 MHz

2 W

15 462.5500 MHz

2 W

5 462.6625 MHz

2 W

16 462.5750 MHz

2 W

6 462.6875 MHz

2 W

17 462.6000 MHz

2 W

7 462.7125 MHz

2 W

18 462.6250 MHz

2 W

8 467.5625 MHz 0.5 W

19 462.6500 MHz

2 W

9 467.5875 MHz 0.5 W

20 462.6750 MHz

2 W

10 467.6125 MHz 0.5 W

21 462.7000 MHz

2 W

11 467.6375 MHz 0.5 W

22 462.7250 MHz

2 W

Remark: Power refers to maximum allowable power as defined by FCC/ISED for each channel under FRS rules for USA and FRS/GMRS for Canada and is not a reflection of the power specification of the radio.

Argentina

Channel 1 2 3 4 5 6 7

Frequency 462.5625 MHz 462.5875 MHz 462.6125 MHz 462.6375 MHz 462.6625 MHz 462.6875 MHz 462.7125 MHz

Brazil Chile

Channel Frequency Channel Frequency 1 462.5625 MHz 14 467.5625 MHz 2 462.5750 MHz 15 467.5750 MHz 3 462.5875 MHz 16 467.5875 MHz 4 462.6000 MHz 17 467.6000 MHz 5 462.6125 MHz 18 467.6125 MHz 6 462.6250 MHz 19 467.6250 MHz 7 462.6375 MHz 20 467.6375 MHz 8 462.6500 MHz 21 467.6500 MHz 9 462.6625 MHz 22 467.6625 MHz 10 462.6750 MHz 23 467.6750 MHz 11 462.6875 MHz 24 467.6875 MHz 12 462.7000 MHz 25 467.7000 MHz 13 462.7125 MHz 26 467.7125 MHz

Channel Frequency Channel Frequency 1 462.5500 MHz 18 467.6000 MHz 2 462.5625 MHz 19 467.6250 MHz 3 462.5750 MHz 20 467.6500 MHz 4 462.5875 MHz 21 467.6750 MHz 5 462.6000 MHz 22 467.7000 MHz 6 462.6125 MHz 23 467.7250 MHz 7 462.6250 MHz 24 467.8125 MHz 8 462.6375 MHz 25 467.8250 MHz 9 462.6500 MHz 26 467.8375 MHz 10 462.6625 MHz 27 467.8500 MHz 11 462.6750 MHz 28 467.8625 MHz 12 462.6875 MHz 29 467.8750 MHz 13 462.7000 MHz 30 467.8875 MHz 14 462.7125 MHz 31 467.9000 MHz 15 462.7250 MHz 32 467.9150 MHz 16 467.5500 MHz 33 467.9250 MHz 17 467.5750 MHz

Columbia

Channel Frequency Channel Frequency 1 462.5625 MHz 10 467.6125 MHz 2 462.5875 MHz 11 467.6375 MHz 3 462.6125 MHz 12 467.6625 MHz 4 462.6375 MHz 13 467.6875 MHz 5 462.6625 MHz 14 467.7125 MHz 6 462.6875 MHz 15 467.7625 MHz 7 462.7125 MHz 16 467.8125 MHz 8 467.5625 MHz 17 467.8375 MHz 9 467.5875 MHz 18 467.9125 MHz

Peru

Channel Frequency Channel Frequency 1 462.5625 MHz 8 467.5625 MHz 2 462.5875 MHz 9 467.5875 MHz 3 462.6125 MHz 10 467.6125 MHz 4 462.6375 MHz 11 467.6375 MHz 5 462.6625 MHz 12 467.6625 MHz 6 462.6875 MHz 13 467.6875 MHz 7 462.7125 MHz 14 467.7125 MHz

Patent and Copyright InformationMOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2016 and 2021 Motorola Solutions, Inc. All rights reserved.WarrantyConsumer Two-Way Radio Products and Accessories purchased in the USA, Canada, Mexico, Uruguay, Panama, Paraguay, Brazil, Argentina, Chile, Peru, and ColumbiaWhat Does this Warranty Cover?Subject to the exclusions contained below, Motorola Solutions, Inc. (“Motorola”) warrants the Motorola Solutions branded consumer two-way radios that operate via Family Radio Service or General Mobile Radio Service (“Products”), the Motorola Solutions branded or certified accessories sold for use with these Products (“Accessories”) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is the exclusive remedy of a consumer, and applies as follows to new Products and Accessories and purchased by consumers in the United States or Canada, which are accompanied by this written warranty:Who is Covered?This warranty extends only to the first consumer purchaser, and is not transferable.

What will MOTOROLA SOLUTIONS, INC. do?Motorola Solutions, Inc., at its option, will at no charge repair, replace or refund the purchase price of any Products or Accessories that do not conform to this warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products or Accessories.What Other Limitations Are There?Any Implied Warranties, Including Without Limitation The implied warranties of merchantability and fitness for a particular purpose, shall be limited to the duration of this limited warranty, otherwise the repair, replacement, or refund as provided under this express limited warranty is the exclusive remedy of the consumers, and is provided in lieu of all other warranties, express or implied. In no event shall Motorola Solutions be liable, whether in contract or tort (including negligence) for damages in excess of the purchase price of the product or accessory, or for any indirect, incidental, special or consequential damages of any kind, or loss of revenue or profits, loss of business, loss of information or other financial loss arising out of or in connection with the ability or inability to use the products or accessories to the full extent these damages may be disclaimed by law.Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.

USA and Canada

Products Covered

Length Of Coverage

Products and Accessories as defined above, unless otherwise provided for below.

Two (2) years from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.

The balance of the original Products and Accessories warranty or for ninety (90) days that are repaired or replaced. from the date returned to theconsumer, whichever is longer.

Latin America

Products Covered

Length Of Coverage

Products and Accessories as defined above, unless otherwise provided for below.

One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below.

The balance of the original Products and Accessories warranty or for ninety (90) days that are repaired or replaced. from the date returned to theconsumer, whichever is longer.

Exclusions From Warranty CoverageNormal Wear and Tear: Periodic maintenance, repair and replacement of Products or Accessories due to normal wear and tear.Abuse & Misuse: Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the Products and Accessories resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola Solutions.Use of Non-Motorola Solutions branded Products and Accessories: Defects or damage that result from the use of Non-Motorola Solutions branded or certified products, accessories, software or other peripheral equipment.Unauthorized Service or Modification: Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola Solutions or its authorized service centers.Altered Products: Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola Solutions branded housings, or parts.Communication Services: Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories.How to Obtain Warranty Service or Other Information?To obtain customer service or information:USA and Canada 1-800-448-6686. www.motorolasolutions.com/talkabout

Email us at Latin America Toll free: Argentina 0800-333-3708 Brazil 0800-168272 Chile 123-0020-2126 Colombia 01-800-710-2285 Mexico 001-855-241-8253 Panama 001-800-205-3867 Peru 0800-55760 Uruguay 598 ­ 24001716Toll or long distance: Spanish +001-312-725-5372 Portuguese +001.312.725.5373 English +001-312-725-5368 Paraguay + 595 61 548 1000 Brazil + 55 11 3525-3055 and 3056www.motorolasolutions.com/talkabout/es (Spanish) www.motorolasolutions.com/talkabout/pt (Portugese)For Accessories: Please call the telephone number designated above for the Product with which they are used.You will receive instructions on how to ship the Products or Accessories at your expense, to Motorola or a Motorola Solutions Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.For more information, please visit us at:https://www.facebook.com/ MotorolaTalkaboutWalkieTalkieshttp://bit.ly/Talkaboutwww.motorolasolutions.com/talkaboutwww.motorolasolutions.com/talkabout/pt (Portuguese)www.motorolasolutions.com/talkabout/es (Spanish)

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,