WM500Remote SpeakerMicrophone PMMN4127_Addendum forMOTOTRBO ION
MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of the irrespective owners. © 2020 and 2021 MotorolaSolutions,Inc. All rights reserved.Printed in
Accessory Manager App IntroductionDownload and Install the Accessory Manager application from Google Play Store for future software upgrades and new feature releases. 
https://play.google.com/store/apps/details?id=com.Motorolasolutions.ama
RSM Overview
Table 1: RSM Overview and Description
| No. | Description |
| 1 | Volume toggle |
| 2 | Power Indicator |
| 3 | Power button |
| 4 | Push-To-Talk (PTT) button |
| PTT call can be either transmitted to a talk group or individual user | |
| 5 | Multifunction (MFB) Button |
| Available multiple functions:To change language/tone in a disconnected stateTo answer calls upon incoming callTo reject calls upon incoming callTo end calls while a call is activeTo mute/unmute microphone while a call is active | |
| 6 | P1 button |
| Function configured on the host or the WAVE application.WAVE default function: WAVE OSM | |
| 7 | P2 button |
| Function configured on the host or the WAVE application.WAVE default function: Channel Down |
| 8 | P3 button |
| Function configured on the host or the WAVE application.WAVE default function: Channel Up | |
| g | P4 button |
| Function configured on the host or the WAVE application.WAVE default function: WAVE OSM | |
| 10 | Audio/Bluetooth Indicator |
| 11 | Emergency button |
| 12 | Microphone |
| 13 | Speaker |
| 14 | Charging port |
| 15 | NFC Location |
| 16 | Audio jack |
Note: * Operational Status Messaging(OSM) requires pre-configuration in the WAVE Application.* Answer/reject/end call and microphone mute functionalities are not applicable for the radios.*More programmable functions may be added to the WAVE application in the future. Please refer to Kodiak User Guide for detail.Pairing the RSM to a MOTOTRBO ION Radio
- While RSM is power off, press and hold the Power button until you hear “Power On” followed by “RSM Battery Level” and lastly “Searching for Host”, and the blue LEDblinks.
- From the MOTOTRBO ION, search and select “WM500_xxxx” from the Bluetooth list. (XXXX denotes the alphanumeric MAC address of your WM500 RSM)
- From the MOTOTRBO ION, tap “Pair” when prompted to initiate Bluetooth Classic connection.
- Once the devices are paired successfully, a tone is played.
- A voice prompt from the RSM indicates that the device is “Connected”.
- Wait for MOTOTRBO ION to prompt another request for Bluetooth Low Energy (BLE) to be paired with RSM.
- Tap “Pair” when prompted and a tone will be played from RSM once successful.
- Now both devices are ready to be used.
Note: MOTOTRBO ION is unable to support RSM through NFC.Note: Always unpair the RSM from the Bluetooth host and ensure that the paired device is “Cleared” before starting another pairing process.
FCC ID: AZ489FT6023IC: 109U-89FT6023For other WM500 manuals, refer to our LearningeXperience Portal: https://learning.motorolasolutions.com
•MN006039A01 – User Manual, English (Printed)•MN006538A01 – User Manual, Multilingual (Online)•MN006126A01 – Installation Guide, English(Online)
References
Motorola Solutions
Motorola Solutions
Governance and Compliance – Motorola Solutions
Motorola Login
Motorola Solutions
Motorola Solutions
Radiofrequency Energy and Safety – Spectrum management and telecommunications
RSS-102 â Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) – Spectrum management and telecommunications
Federal Communications Commission | The United States of America
($V>Main – English)
Home | Occupational Safety and Health Administration
[xyz-ips snippet=”download-snippet”]