SURFboard SB6182 DOCSIS 3.0 Cable Modem Install Manual

SURFboard® SB6182

DOCSIS® 3.0 Cable Modem

Install Sheet

IMPORTANTPlease contact your service provider if you do not already have a cable service installed or you do not currently subscribe to a high-speed cable  service.You may need to provide your modem’s MAC address and serial number (see next page for details).

Connecting the ModemBefore starting, make sure of the following:

        • Cable service is up and running.
        • Coaxial cable is already connected to the home’s cable outlet. If not, contact your service provider.
        • • Computer is turned OFF.
        1. Connect the coaxial cable to the cable outlet (or cable splitter) and the other end to the Cable connector on the rear of the modem.
        2. Plug the power cord into the Power port on the rear of the modem and the other end into an electrical outlet. This will automatically power  ON the modem.
        3. Connect the Ethernet cable (included) to the Ethernet port on the rear of the modem and the other end to the Ethernet port on the computer (or other device).

Starting the Modem

        1. Power ON the computer and log in. Check that the Receive, Send, and Online LEDs on the modem are lit SOLID (not flashing). See next page for more LED information.Note: If all three LEDs did not turn ON, check each cable connection (coaxial, Ethernet, and power) and hand-tighten, if necessary. Contact your service provider if the problem continues.
        2. Open a web browser of your choices, such as Internet Explorer, Firefox, or Google Chrome.
        3. Type any valid URL (for example, www.motorola.com) in the address bar to test the network connection.– If the web page opens, the modem was set up properly.– If the web page does not open, you may have to contact your current service provider to set up your Internet service or activate your modem.

Additional product information is available in the SB6182 Cable Modem User Guide.Please visit www.motorola.com/us/support.

Product Operation

Front Panel LEDs

Modem Label

Please note: The SB6182 modem label is located on the bottom of the modem. It contains specific ID information for the modem.

To receive cable service, your service provider may request the Media Access Control (MAC) address (see HFC MAC ID) and serial number (see S/N) located on the modem label.

MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. SURFboard is a registered trademark of Motorola Mobility, Inc. All other product or service names are the property of their respective owners. No part of the contents of this document may be reproduced or transmitted in any form or by any means without the written permission of the publisher.©2012 Motorola Mobility, Inc. All rights reserved.588076-001-a 05/2012

SURFboard SB6182 DOCSIS 3.0 Cable Modem Install Manual – SURFboard SB6182 DOCSIS 3.0 Cable Modem Install Manual –

Posted

in

by

admin

Tags:

, ,