Moza Mini MX Gimbal for Smartphones User Manual

Table of Contents

Moza Mini MX Gimbal for Smartphones User Manual

Mini MX Overview

Note: Please activate MOZA Mini MX with MOZA Genie App before the first use. Otherwise, normal working functions may be limited.

Download APP

You can scan the QR code to download the “MOZA Genie” directly, or you can search the “MOZA Genie” in the APP store & Google Play to download it.(scan the QR code below to download the APP)

The customized “MOZA Genie” APP for Mini MX can help you make better use of the various functions of the gimbal.
Please routinely check for the latest version of the MOZA Genie app. Make sure you have set to automatic update on your mobile smartphone.

Mounting and Balancing

Folded Status

Unlock the gimbal as shown in illustration

Place the mobile phone in the phone holder with its camera facing outwards. Adjust the phone holder to keep the phone leveled in a natural state.

Charging

The MOZA Mini MX has a built-in lithium battery. Before first use, fully charge it to condition the battery to ensure smooth operation.
When the power indicator starts flashing, the battery level is less than 20%. Please charge it in time.
With a universal Type-C port, Mini MX can be charged by both phone charger and power bank.
The battery will automatically stop charging when it gets fully charged. The blue indicator light is always on. Please disconnect the charger.

Battery Level Indicators

All blue LEDs on: 70%-100% battery level
Two blue LEDs on: 40%-70% battery level
One blue LED on: 20%-40% battery level
Blinking: below 20% battery level
Blue light blinks: Charging
Blue light is always on: Charging completed

Connecting to the MOZA Genie App

Refer to the illustration on page P2，installing the phone and balancing the gimbal.

Long press the function button for 3s to power on the gimbal, turn on the Bluetooth of the phone, launch the MOZA Genie App. Click the Bluetooth icon in the main interface of MOZA Genie App to search for connectable devices, select the device with the connection prefix as Mini MX. After successful connection, the gimbal will automatically enter the shooting interface.

Mini MX Activation

Enter the APP main interface to select the gimbal to be connected, the activation prompt box will pops up, click Activate. After the activation is completed, the gimbal will work normally. If activation fails, please try to reactivate, if it fails again, please follow the prompts to contact customer service.

Button function (MOZA Genie App Control)

Fn button

Long press: on/offPower on and enter standby mode (phone not clipped/unlocked)Single press: shutter; record / stopWake up (gimbal in standby mode)Double press: switch to video mode/photo modeTriple press: Horizontal and vertical mode switching

Joystick

Move upwards: phone camera goes upMove downwards: phone camera goes downMove leftwards: phone camera goes leftMove rightwards: phone camera goes rightInception mode: Move leftwards, roll axis rotates counterclockwiseMove rightwards, roll axis rotates clockwise

Zoom +

Click and hold: Zoom inSingle press: Pan-tilt followDouble click: Automatically zoom in to maximum

Zoom –

Press and hold: Zoom outSingle press：FPV ModeDouble click: Automatically zoom out to minimumInception Mode:Push the joystick left and right in FPV mode to control the rotation direction

Smart Trigger

Click and hold: All Lock ModeDouble click and hold: Sport Gear ModeClick: Follow the center of the shot intelligentlyDouble click: Re-center and exit the current modeTriple Click: Switch between the rear and front-facing camera

Note: Mini MX is able to use your smartphone’s original camera to take photos, record/stop. However, featured modes of the above functions cannot be controlled without the app. It is recommended to use the MOZA Genie App. When connected to the app, a notification will appear to let you know which mode was switched to.

Firmware upgrade

Hold the ZOOM- button then click the Fn button at the same time, the indicator flashes from top to bottom. Then the stabilizer enters, the stabilizer enters the firmware upgrade mode, connect the APP, and click firmware upgrade.