DREAM . EXPLORE .INSPIRE
MPOW FLAME PROTRUEWIRELESSEARBUIEUSER MANUALMODEL: BH379A
PACKING LIST
DIAGRAM
POWER ON
Mode 1 |
Mode 2 |
- The earphones automatically turn on (with blue LED light flashing) and start pairing when they are taken out from the charging case.
- In the shutdown status. and when the earphones are not in the charging case. press and hold the MFB button on the Right and Left earphones for 2s to power on (with the blue LED light flashing).
POWER OFF
Mode 1 |
Mode 2 |
- Put the earphones back in the charging case, and they’ll shut down automatically.
- If the earbuds are not in the charging case. just keep pressing the MFB button for 5s on the P/l earphone to power off
PAIRING
Mode 1
Mode 2
- The earphones automatically start pairing (with the blue LED light flashing twice quickly every second on the right earbud) when they are taken out from the charging case. Next choose “Mpow Flame Pro” on your device.
- Turn it on by pressing and holding”L”&”P” earphones simultaneously for 2s, then press and hold the “P” earphone for 2s to enter into pairing mode in which the LED light on the right earbud flashes blue twice quickly every second. Next. select “Mpow Flame Pro” on your device.
MUSIC
Pause / Play AutomaticallyWhen both earbuds are worn on your ears you can remove either earbud from your ear to pause music on both sides for instant conversation: put the earbud back in and music automatically resumes playing.
INCOMING CALL
- Answer / Hang-upClick the MFB button on the Right or Left earphones once.
- RejectKeep pressing the MFB button on the Right or Left earphones for ls.
- ActivateSin Double Click the MFB button on the Right earphones.
RESET
- Turn off your device’s Bluetooth and disconnect Mpow Flame Pro with your phone.
- Simultaneously double click both buttons of volume up, then keep pressing both buttons for 5 seconds.
- The LED light will flash blue 4 times every second which means that reset is successful.
CHARGING
Mode 1: Wired charging
Mode 2: Wireless charging
Note: Wireless charging is sold separately
Do not put the earbuds in the charging case when the earbuds are wet
CORRECT DISPOSAL OF THIS PRODUCT
( Waste Electrical& Electronic Equipment ) This Marking showed on the product or its literature. indicate that it should not be disposed of with other household wastes at the end of its working life. |
To prevent possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product. or their local government office. for details of where and how they can take this item for environmentally safe recycling.Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
FCC STATEMENT
Airy Changes or modifications not already approved by the party responsible for compliance could void the user’s authority to operate the equipmentThis device complies with part 15 of the FCC Rules Operation is subject to the following two conditions; (1 ) This device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
[xyz-ips snippet=”download-snippet”]