MPOW FlAMEATHUEWIRELESSEARBUDSUSER MANUALMODEL: BHSO3A
PACKING LIST
DIAGRAM
POWER ON
Modle1 (Auto)
Modle2 (Auto)
Mode the earphones automatically turn on (with due LED light flashing) and start pairing when they are taken out from the charging case Mode Z In the shutdown status and when the earphones are not in the charging case simultaneously press and hold the MFB of both earbuds for 2 seconds to power on 1 with the blue LED light flashing).
POWER OFF
Modle 1 (Auto)
Modle 2 (Auto)
Mode 1: Put the earphones back in the charging race to turn them off. Mode 2: If the earphones are not in the charging case. just press and hold the MFB of both earbuds for 5 seconds to power them off.
PAIRING
Modle 1 (Auto)
Voice Prompt: pairing
Modle 2 (Auto)
MUSIC
INCOMING CALL
Mute/UnmuteWhen you are having a phone call. you can press and hold both volume up and volume down buttons for 3 seconds to mute or unmute the earbud’s microphone.
RESET
- Turn off your device’s Bluetooth function.
- Take out both earbuds from the charging race and the earbuds will automatically enter into the pairing mode in which LED flashes blue and red alternately.
- Simultaneously keep pressing both volume up and volume down buttons of either earbud for 3 seconds.
- The paired information will be cleared and the earbuds will be off.
CHARGING
Do not put the earbuds in the charging case when the earbuds are wet
CORRECT DISPOSAL OF THIS PRODUCT
( Waste Electrical& Electronic Equipment)This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.To prevent possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources household users should contact either the retailer where they purchased this product or their local government office. for details of where and how they can take this item for environmentally safe recycling.Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.
FCC STATEMENT
Any Cra rigors or modifications not expressly opposed by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with part 15 of the FCC_Rules-OWation is subject to the following two conditions & – -(1)This device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
[xyz-ips snippet=”download-snippet”]