MPOW BH510A MDots True Wireless Earbuds User Manual

MPOW MDOTSTRUE WIRELESS EARBUDS

Note: Remove the insulating film on both earbuds when using it for the first time.MODEL: BH510A

PACKING LIST

DIAGRAM

POWER ON

Mode 1: The earphones automatically turn on(with white LED light flashing) and start pairing when you open the charging case. Mode 2: In the shutdown status and when the earphones are not in the charging case. simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( with the white LED light flashing).

POWER OFF

Mode 1: Put the earphones back in the charging case and close the case to turn them off.Mode 1: If the earphones are not in the charging case. just press and bolo the MFB of both earbuds for 5 seconds to power them off (Mode 2 cannot be conducted during music playing or calling.)

PAIRING

1. Open the charging case. they will automatically enter the pairing mode in which the LED light flashes white twice per second. and then select ‘Mpow MDots-Note The earbud will reconnect to the paired device by priority. If you want to pair to the second smartphone. please disconnect Bluetooth on the paired smartphone.

MUSIC

INCOMING CALL

MUSIC & INCOMING CALL & Siri

• Volume Up / Down Volume + : press and hold the MFB button of Right earbud to turn up the volume increasingly.Volume -: press and hold the MFB button of Left earbud to turn down the volume decreasingly.
• Next /Previous TrackNext Track double Click the MFB of Right earbud. PreviousTrack double Click the MFB of Left earbud.
• Play /PauseClick the MFB of either earbud once
• Answer/Hang UpClick the MFB button on the Right or Left earphone once
• RejectPress and hold the MFB of either earbud for 2 seconds.
• Activate SiriTriple-click the MFB of either earbud.

RESET

1. Take out both earbuds from the charging case.
2. Turn off both earbuds by keeping pressing them for 5 seconds
3. Press and hold both earbuds fix 10 seconds to clear the paired information
4. The LED will flash red and white alternately 3 times.
5. Reset successfully.
6. Put both earbuds into the charging case to re-enter into pairing mode.

CHARGING

Do not put the earbuds in the charging case when the earbuds are wet

CORRECT DISPOSAL OF THIS PRODUCT

( Waste Electrical& Electronic Equipment )This Marking shown on the product or its literature. indicate that it should not be disposed with other household wastes at the end of its working life.To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with part 15 of the FCC Pules. Operation is subject to the following two conditions &(1 ) This device may not cause harmful interference. and(2) this device must accept any interference received. including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.