Mpow Bluetooth Headset User Manual

USER MANUAL

Mpow Bluetooth Headset

Package

EVA bag ×1Difference sizes earplugs ×3Memory cotton earplugs ×1USB line ×1User manual ×1

Structure Diagram

1. Speaker
2. + volume key
3. MFB Key
4. – volume key
5. LED indicator
6. Charging jack

Product Specification

Bluetooth Standard : V4.1Wireless profile : Headset, Handsfree, A2DP, AVRCPOperating Range : 10mStandby Time : 220hrsCharging Time : 1.5hrsTalk /Playing Time : 7hrsCharging Voltage : DC 5VBattery Capacity : 100mAh/3.7V

Function and Operation

Power On/Off

Power On : Long press the MFB button for 3 seconds in the shutdown state.

Power Off : Long press the MFB button for 3 seconds in the boot state with the red indicator light flashing 3times and goes off.

Answer / Hang Up / Reject Phone

Short press the MFB button or use the phone key to answer Short press the MFB button or use the phone key to hang up Long press the MFB button for 1 seconds to reject when incoming call ringing

Redial the Dialed Number Double press the MFB button for voice dialing when connected

Volume Up / Down/ Next/ Last song

Short press “+”the volume increase, Long press“+” for 2 seconds will turn to next songShort press “-” the volume decrease, Long press“-“ for 2 seconds will turn to last song

Play / Pause/Answer

Short press the MFB button to pause and press again to play when playing songShort press the MFB button to answer when call ringing and press again to hang up when calling

Clear Pairing InformationLong Press the MFB button until the blue light flashing 3 times when charging

Charging the headsetYou must fully charge the headset before using the headset in first time.

1. Connect the USB charging cable to the USB charge port of the headset.
2. The red light will turn on when charging.
3. The blue light turn on when charging completed.

Pairing Mode

1. Long press the MFB button for 5 seconds until the red and blue light start flashing alternately in the shutdown state, and it will automatically enter the pairing mode.
2. Turn on the Bluetooth function of your phone or other devices, search the Bluetooth devices and select “Mpow Flame ” to connect.
3. Enter the code “0000” if needed.

Remark: It will connect to the last paired smart device automatically when it’s turned on next time .Please make sure the Bluetooth function of your smart device is turned on before turn on the headset.

Connect two Bluetooth device at the same time

1. Pair the Bluetooth headset to the first phone.
2. After a successful pairing, turn off the headset, turn off the headset, and also turn off the Bluetooth function of the first phone.
3. Pair the Bluetooth headset to the second phone.
4. After a successful pairing, turn on the Bluetooth headset of the first phone, Select the “MPOW Flame” and click connect.
5. Two phone will both be connected to the headset at the same time.

Correct disposal of this product

(Waste Electrical & Electronic Equipment)This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household user should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

report this ad

Questions about your Manual? Post in the comments!