USER MANUAL
Mpow Bluetooth Music Receiver
Specifications:
B1uetooth Version: V4.0Frequency Range: 2.4GHzOperation: Class2Bluetooth Mode: HFP/HSP/A2DP/AVRCPB1uetooth Range: up to 30 feetCharge time: 1.5 hoursPlaying time: up to 1O hours
Product Diagram
- Multifunction Button
- Next Song / Volume Up
- Previous Song / Volume Down
- Charge Port
- Indicator
Instruction
- Connect the receiver to your home stereo system or car stereo system via the 3.5mm audio cable/ adapter
- Pair the receiver to your phone
- Now you can enjoy your music through the home stereo system or car stereo system
Remark:If you want to use it in the car stereo system, you need to adjust the car radio to AUX in.
Charging the receiver
You must charge the receiver fully before using the receiver for the first time.
- Connect the USB charging cable to the USB charge port of the receiver.
- The light indicator will turn into red when charging.
- 11ae full charge takes about 1.5 hours.
- The red light indicator goes out when charging completed.
Low-Voltage alert:
When the alert tone sounds every minute and the indicator light toms into red indicate that the battery has my out, need to charge as soon as possible.
Power on/off the receiver
Power on: Press the multifunction button about 3 seconds until the blue and red indicator lights start flashing alternatelyPower off: Press the multifunction button for about 3 seconds until the blue indicator light goes off.
Pair to your phone
- Before using the receiver for the first time, you must pair it with your phone.
- Press the multifunction button for about 3 seconds until the blue and red lights start flashing alternately.
- Turn on the Bluetooth function of your phone.
- Search for the Bluetooth devices and select “MPOW”
- Enter the code “0000” if needed.
- If paring is successful, the blue indicator light flash slowly.
Remark: L It will come& to the last connected phone automatically when it duns on. (Please make sure the Bluetooth function of your phone is on before turn on the receiver.)
Connect two Bluetooth devices at the same time
I. Pair the Bluetooth receiver to the first phone.
- After pair successfully, tour off the Bluetooth function of the first phone.
- It will enter pairing mode again.
- Pair the Bluetooth receiver to the second phone.
- After pair successfully, turn off the Bluetooth motion of the second phone.
- Tam on the Bluetooth function of the fest phone. Select the “NIPOW. and click “connect”.
- Turn on the Bluetooth function of the second phone. Select the “MPOW. and click “connect”. S. Two plumes will both connect the Bluetooth receiver at the same time.
Remark:If you want to switch different phone to listen music, please pause the =isle of the first phone, and then play the music on the second phone, it will switch to the music of the second phone after a few seconds.
Answering a callFor iPhone users,
Selection 1. Press the multifunction button.Selection 2. Press the “Answer” button of your iPhone and check your iPhone call menu. Look for the audio source and select the ” MPOW “.
For Android User (such as Samsung, HTC, Sony etc. ),Selection 1. Press the multifunction button.Selection 2. Press the “Answer” button of your phone.
Ending a callPress the multifunction button.
Rejecting a callPress the multifunction button until you hear the sound “toot” and then release.
Redialing the last called numberDouble press the multifunction button.
Playing musicWhen you are listening to the music, you can press the buttons “Play, Pause, Previous Song, Next song” to select your optimal performance and control the volume.
- Play /Pause: Short press the multifunction button.
- Next Song: Short press the button ” + “.
- Previous Song: Short press the button ” – “.
- Volume Up: Long press the button ” + “.
- Volume Down: Long mess the button ” – “.
Questions about your Manual? Post in the comments!
[xyz-ips snippet=”download-snippet”]