MPow SoundHot B6 SoundBar Manual

User Manual

MPow SoundHot B6 SoundBar

 

Packing List

• Mpow Soundhot B6
• Power supply cord set
• 3.5mm audio cable
• 3.5mm to: 2-male RCA cable
• Optical-fiber cable
• Remote control
• Wall mount accessories
• Thank-you card
• User manual

Diagram

1. Power Button
2. Volume- / Previous track
3. Mode switch button
4. Volume+ / Next track
5. Optical-fiber input port
6. Aux-in audio port
7. Power port

Power  

Note: Please connect it to power before using.

Bluetooth 

Note: The default input setting ls optical-fiber input mode after booting the speaker. Click the button to switch among Aux-in input and Bluetooth mode. (Input mode in priority order. Optical-fiber > Aux-in > Bluetooth )

Audio

EQ Switch:Simultaneously press and hold both “+” and ‘M’ buttons for 2 seconds.

NOTE: TV Audio Output Setting is Required

When you connect the Soundbar wlth a TV, please make sure you have set your TV audio to support “external speakers” and disable the built in TV speakers.

Remote Control

 

1. Broadcast Mode (Voice Mode)2. Movie mode3. Music mode4. Re connection mode5. Pairing mode

 

 

 

 

 

Wall Mounting Guide

1. Mark the location on the wall                                                                                       Choose the mounting height and mark A1; Mark A2 on the right of A1 on the same horizontal line; The distance between the 2 spots should be 729mm exactly
2. Drill the holes                                                                                                                   Drill the holes in the marked position. –
3. Install the speaker                                                                                                           Insert the wall plugs in the holes; Tighten the screws into the holes through the foam pads; Hang the speaker on the screws;

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

 

www.xmpow.com | [email protected]                                                                          MPOW TECHNOLOGY CO., LTD                                                                                   Copyright © MPOW Inc. All rights reserved.

 

MPow SoundHot B6 SoundBar Manual – MPow SoundHot B6 SoundBar Manual –

Questions about your Manual? Post in the comments!