Mpow TH1 Bluetooth Headset BH355A User Manual

MPOW TH1 BLUETOOTH HEADSETMPOW AUDIO WIRELESS

Package

Diagram

Specification

Instructions

Connection With Two Devices

1. Pair with your first device.2. Turn off the Bluetooth of the first device.3. Long press headset to enter into pairing mode and pair with your second device. The blue light will flash slowly after successfully connected.4. Turn on the Bluetooth of the first device, and manually connect “Mpow TH1” in the paired list. After the connection is successful, your headset is connected to the two Bluetooth devices at the same time（If the first device is the IOS, then you need to manually connect. If it is Android, it can be automatically connected.）

Tips

1. Answer/Hang up the Current Call: Short press the MFB2. Reject the Call: Long press the MFB for 2s3. Hang up the Current Call to Answer a New Call During Calling: Short press the MFB4. Reject a New Call During Calling: Long press the MFB for 2s

Charging

How To Set On Win10

1. Turn on Bluetooth on Win 10 and connect to Mpow TH1.

3. When the setting is finished, function normally.

Q & A

1. How to Pair if Failed?In standby mode, hold the Volume+and Volume-button simultaneously for 5s to clear the pairing record. Then long-press the MFB until blue and red indicator light flashes alternatively to pair again.2. Any Password Needed when Paring?If needed, please try 0000 or 8888, 1111, 1234.3. How Can I Charge My Headset?You can charge it via the charging dock or USB cable.4. How to Restart the Headset if Failed?Try to charge it via USB cable and then restart it.

FCC Statement

Operation is subject to the following three conditions：1. This device may not cause harmful interference, and.2. This device must accept any interference received, including interference that may cause undesired operation.3. This device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction.Note：This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.

Mpow TH1 Bluetooth Headset BH355A User Manual – Mpow TH1 Bluetooth Headset BH355A User Manual –