MPOW Wireless Earphone User Manual

USER MANUALWireless Earphone

DIAGRAM

1. Speaker
2. Eartip
3. Mic
4. Multifunctional Buttom(MFB)
5. LED indicator
6. Vol +/-
7. USB charging dock

PACKING LIST

Earphone X1Eartip X3Ear Hook X1USB Charging Cable X1User Manual X1Portable Bag X1

SPECIFICATION

Note: The actual time may vary from mobile phone types and functions.

OPERATION GUIDE

Power On/OffPower On: Long press and hold the MFB for 2 seconds and the voice prompt will be heard.Power Off: Long press and hold the MFB for 3 seconds and the voice prompt will be heard.

Search Pairing (the first time to use)

1. Long press the MFB for 5 seconds in power-off mode, the red and blue indicator lights will flash alternately. (The earphone automatically enters the pairing state after startup.)
2. Turn on the Bluetooth function on your cellphone, search “Mpow EM10” and click it to connect (If ask for passkey, please enter “0000”).
3. If pairing is successful, you will hear an indication voice “connected”.

Connection with Two Mobile Phones

1. Pair the earphone with the first phone.
2. After the successful pairing, turn off the earphone and the Bluetooth function of the first phone;
3. Pair the Bluetooth earphone to the second phone as the above steps.
4. After the successful pairing, turn on the Bluetooth function of the first phone, select “Mpow EM10” to connect;
5. When the above operations are successful, two phones will both be connected to the earphone at the same time.

CallAnswer/end a call: Short press the MFB to receive the phone call, press it again to end the phone call.Reject a call: Long press the MFB for 2 seconds to reject the incoming call.Redial: Double press the MFB to redial the last number you called on your phone in the connection state.Voice dialing: Long press the MFB for 1-2 seconds in the connection state.

MusicPlay/Pause: Short press the MFBNext Song/Previous song: Long press the Vol +. Button to play.next song in music mode; Long press the Vol -. Button to play the previous song in music mode.Vol +/-: Short press the Vol +. Button to increase the volume; Short press the Vol -. Button to decrease the volume.

Earphone ChargingThis headphone is equipped with a built-in non-detachable and rechargeable lithium battery. Please make sure that the battery is charged fully for the first time.The red indicator light is always on when charging; the blue indicator light remains lit when fully charged.

Factory SettingHold MFB for 5s until red and blue flash alternately 3 times during charging.

Bluetooth Indicator Status & Voice Prompt

FCC STATEMENT：

Operation is subject to the following three conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.(3) This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.