INSTRUCTIONMANUALREACTOR®1.0, 1.7 & 2.5 LSTOVE SYSTEMS
Retain these instructions for future reference.
DANGERFOR OUTDOOR USE ONLY
- Do not attempt to light appliances.
- Extinguish any open flame.
- Disconnect from the fuel supply.
- Evacuate immediately.
- Allow gas to dissipate for 5 minutes before relighting the appliance.
Failure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury, or death.FOR YOUR SAFETYDo not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
There are serious hazards associated with using this stove and fuel. Accidental fire, explosion, and misuse can cause death, serious burns, and property damage. You are responsible for your own safety and the safety of those in your group. Please use good judgment and read these instructions for use carefully. Familiarize yourself with the stove before connecting it to its gas container. Keep these instructions for future reference.This stove is a lightweight, the compact device made for OUTDOOR USE ONLY to boil water or cook food.
- Check that the seals between the stove and the gas container are in place and in good condition before connecting the stoveto the cylinder. Do not use this stove if it has damaged or worn seals.
- Gas containers must be changed in a well-ventilated location outside and away from any sources of ignition, such as nakedflames, pilot lights, electric fires, and away from other people.
- Listen and smell for leaking gas. Leaking gas is a serious hazard. LPG is invisible and odorless, and strong odorant additivescan fade over time. Leaks are not always detectable by smell. Do not use this stove if it is leaking, damaged, or does notoperate properly.
- Check that the stove and fuel container connection is secure and tight. If the connection does not look or feel secure, or ifyou hear or smell leaking gas and cannot stop the flow of gas, do not use a stove or fuel container. Move it to a well-ventilated area away from any ignition source to locate and stop the leak.
- Check for leaks using soapy water. Do not try to detect leaks using a flame. The use of a leaking stove can cause fire, burns, severe injury, or death.
- Never use fuel canisters that weigh more than 8 oz. (227 g) and never use canisters more than 4 inches (~10 cm) high, because oversized canisters increase stove instability.
- Use MSR canister stand when using canisters with a diameter less than 4 inches (~10 cm).
- Keep stove and fuel container away from other heat sources. Never use any kind of windscreen. If you expose the fuel container to high heat, it will explode or leak and you can be killed or seriously burned.
- Follow all warnings on fuel containers regarding use and storage. The canister can be checked for remaining fuel by assembling and attempting to light the stove.
- Do not store or use gasoline or other liquids with flammable vapors in the vicinity of this or any other stove.
- Do not disassemble the stove beyond what is described in these instructions. DO NOT MODIFY THIS STOVE. Disassembly or modification of stove in any manner not consistent with these instructions voids warranty and can result in an unsafe situation where fire, burns, severe injury, or death can occur. No user-serviceable parts.
- Do not use the stove if parts are missing or broken, or with replacement parts not specific to your stove model. Use of stove with missing or broken parts, or with eplacement parts not specific to your stove model, can result in an unsafe situation where fire, burns, severe injury, or death can occur.
- Because of the compact nature of the Reactor® stove system and its resulting height, the Reactor stove system may tip more easily than stove systems of lesser height. To mitigate tipping: (1) use stove only with Reactor cookware, (2) never leave the stove unattended, (3) keep children and pets far away from the stove, (4) always use the stove on a solid, stable and even surface, and (5) never use the stove in a manner inconsistent with these instructions or contrary to its intended use. Tipping of the Reactor stove system can result in an unsafe situation where fire, burns, severe injury or death can occur.
THERMAL TRIP MECHANISM
The Reactor® stove is designed with an internal Thermal Trip mechanism, which will shut the stove off if it becomes overheated. Overheating may result from the use of non-Reactor cookware, storage above 120°F (49°C), damage to the burner unit, or improper lighting. If the stove becomes inoperable, immediately discontinue use and return the stove to an authorized MSR dealer.
REACTOR® STOVE SYSTEM OPERATING INSTRUCTIONSSTOVE PARTS
A. LidB. Fuel CanisterC. StoveD. Burner ScreenE. Burner Rim | F. Flame AdjusterG. PackTowlH. PotI. Pot Handle |
CONNECT STOVE AND CANISTER
- Close Flame Adjuster (F). Turn Flame Adjuster clockwise. 2. Finger-tighten stove onto top of the canister until the connection is secure.
STOVE SET UP
- Clear cooking area of combustible materials and flammable liquids or vapors. 2. Place stove assembly on a solid, stable, even surface. Use an MSR® canister stand when using small fuel canisters (dia. < 4 in/10.2 cm).
TURN STOVE ON
- Hold a lit match or lighter over top of Burner Screen (D), directly above the MSR logo.
- Open Flame Adjuster until fuel begins to flow. Turn Flame Adjuster counterclockwise about 3 full turns.
- Confirm that stove has ignited. A blue flame may be visible. The stove will become RED HOT in 5 to 30 seconds, depending on wind and temperature. If fuel does not ignite within 10 seconds, close the Flame Adjuster, wait for 15 seconds, and repeat substeps 1-3 above.
USE STOVE TO COOK
- Add food or liquid to Pot (H). Never exceed MAX. FILL (1.0 and 1.7-liter pots only). 2. Place Pot onto stove by aligning it with Burner Rim (E). 3.Turn Flame Adjuster to adjust the heat.
TURN THE STOVE OFF, PACK UP THE SYSTEM
- Close Flame Adjuster Valve when done cooking. Turn clockwise about 2.5 turns until full stop.
- After Burner Screen stops glowing, wait 5 minutes for the stove to cool.
- Move stove assembly away from any ignition sources and unscrew canister. A small amount of gas may escape when unscrewing the stove.
- Pack up system:
Reactor 1.0 L: Place PackTowl® towel (G) in the bottom of Pot and then canister upside down, then stove upside down. Align Flame adjuster with pour spout.Reactor 1.7 L: Wrap dry PackTowl around the stove and place upright in the bottom ofPot. Place upright canister on top. Place lid on Pot. Fold handle on top of the lid.NOTE: Ensure stove assembly is dry before long-term storage. Corrosion can occur when stored wet.
©2021 Cascade Designs, Inc., 4000 First Avenue South, Seattle, WA 98134 USACascade Designs, Inc., USA – 1-800-531-9531 or 206-505-9500Cascade Designs, Ltd., Ireland – (+353) 21-4621400www.msrgear.com | [email protected]
References
[xyz-ips snippet=”download-snippet”]