muse M-308 BT Portable Bluetooth Speaker User Manual

M-308 BT

Please read the instruction carefully before operating the unit.

PORTABLE BLUETOOTH SPEAKER

LOCATION OF CONTROLS

  1. Speaker
  2. Function LED indicator (blue for Bluetooth / USB/ micro SD mode; red for charging)
  3. Mbutton: Disconnect the paired Bluetooth device; Stereo pairing function
  4. - button: Volume down; Previous track
  5. + button: Volume up; Next track
  6. >button: Play / Pause; Receive call/ Redial call/ End call
  7. Strap
  8. Microphone
  9. Micro SD (TF) card slot
  10. USB port for MP3 playback
  11. Micro USB jack for charging the built-in battery
  12. ON/OFF switch

POWER SUPPLY

The unit is powered by a built-in, lithium-ion rechargeable battery.Charge the built-in battery for at least four hours before using the device for the first time.To charge the internal battery, connect the smaller end of the supplied USB cable to the Micro USB jack and the other end to a poweredUSB jack on your computer or an AC power supply (not included).The function LED indicator will change to red color during charging and light off when the battery becomes fully charged.

Warnings:

  • While using the built-in battery, the environmental temperature should be 5°C (41°F) to 35°C (95°F).
  • The built-in battery in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 100°C (212°F), or incinerate.
  • To get the longest service life of the built-in battery, charge at indoor-
  • Attention should be drawn to the environmental aspects of battery
  • Do not throw batteries in the fire!
  • The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
  • When the battery is low, the sound may distort and you will hear the warning tone every minute. The unit will turn off automatically when the battery is too low to work.

CAUTION: Danger of explosion if the battery is incorrectly replaced.Replace only with the same or equivalent type.

OPERATION

Turning unit ON/OFFSlide ON/OFF switch to “ON” position to turn on the unit. You will hear the voice “Bluetooth mode”.

Slide ON/OFF switch to “OFF” position to turn off the unit.The Bluetoote word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners.Pairing a Bluetooth Device

  1. Slide ON/OFF switch to “ON” position to turn on the unit. The function LED indicator will blink blue rapidly indicating it is in pairing mode.
  2. On the Bluetooth device, enable Bluetooth and select “M-308BT” from the Device List. (Refer to the user manual of the device to be connected for detailed operations.) If the Bluetooth device prompts for a passcode, use “0000”. Some Bluetooth devices will ask you to accept the connection. If the units are paired properly, you will hear the voice “Connected”. The function LED indicator will remain on after being paired successfully.

Tip: If you want to connect your Bluetooth speaker to another Bluetooth audio device. Press and hold the M button to disconnect the device. and then follow the steps above to make a new connection.

  • On some devices such as computers, once paired you must select the unit from the Bluetooth menu and choose Use as Audio Device (stereo)– or
  • Pairing remains intact when the unit and/or your Bluetooth device is taken out of communication range. An active connection will be re-established when your Bluetooth device returns within range.
  • When the unit is turned on it will automatically try to reconnect with the most recently paired Bluetooth device.

Hereby, NEW ONE S.A.S. declares that this MUSE M-308 BT is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.muse-europe.com

Using a Bluetooth Device

  1. Slide ON/OFF switch to “ON” position to turn on the With a unit paired (see previous section). operate your Bluetooth device and its sound will be heard through the M-308 BT’s speaker.
  2. Press the + or - button to select the desired track. You can also select the track on the device to which you are
  3. Press and hold + or - for a few seconds to increase or decrease the volume. You can also adjust the volume on the device to which you are
  4. Press the > button to pause playback. Press again to resume

Note: The Bluetooth indicator will blink blue slowly during playback.

Receiving / Ending a Phone Call

This unit is equipped with a built-in microphone, which allows you to make or end calls of a connected mobile phone through this unit. Make sure your Bluetooth-enabled mobile phone is paired with the unit. When there is an incoming call to the connected mobile phone. you will hear an incoming call alert tone from the unit.

  1. Press the > button to answer the incoming call.
  2. Press the > button again to end call,
  3. To reject the incoming call, press and hold >button
  4. To redial the last number retained in the memory of the mobile phone, press the > button twice.

Notes:

  • The re-dialing function is unavailable if there is no dial record feature in your mobile phone.
  • This unit will not operate or may operate improperly with some Bluetooth mobile phones/ audio players.
  • If the conversation is not clear, try to move closer to the

STEREO PAIRING

This function makes it possible for you to get stereo surround sound quality. It requires two Bluetooth speakers M-308 BT to realize the real Bluetooth radio channel wireless separation. therefore. you’ve got to purchase two M-308 BT.Tips: it is suggested that the distance between the main speaker and secondary speaker is within 4 meters.

  1. Turn on the two Bluetooth speakers M-308 BT.
  2. When both speakers are in pairing mode. Press the M button twice on one Bluetooth speaker which will become the main speaker (left channel) until you hear the indication tone. then it will search and connect to the secondary speaker (right channel). They will recognize the left and right channels automatically. You will hear the indication voice “Connected– when the two speakers are connected successfully.
  3. Connect your main speaker to Bluetooth enabled device (e.g. smartphone).
  4. Play your song and listen to the sound in stereo.
  5. Press > button on either speaker to pause playback. Press again to resume playback.
  6. Press the M button twice on the main speaker or secondary speaker to disconnect the stereo pairing.

LISTENING TO USB/ MICRO SD

To insert a USB device (not included)

To insert a USB device (not included) connect your USB device to the USB port. the set will switch to –USB” mode automatically. If USB has already been inserted. Press the M button to switch to USB mode.

To insert a Micro SD card (not included)Insert your micro SD card in the card slot. the set will switch to “SD” mode automatically. If a card has already been inserted, press the M button to switch to card mode.

Note

– The total number of MP3 files on the USB device and Micro SD card should not exceed 999.– The device may not contain more than 99 directories.– The reading time takes about a few seconds or more depending on the amount of MP3 files and folders on a USB device and Micro SD card.– Do not put anything other than a USB device to the port of this unit. Other objects may damage the USB mechanism.– Do not put anything other than a micro SD card into the micro SD card slot of this unit. Other objects may damage the card mechanism.– The USB socket must not be connected to the computer directly, for that may damage the unit.– There are many USB devices and micro card in the market. We cannot guarantee to support all different models. Please try another USB device and micro SD card if your device is not supported– The unit might not support all the multimedia files stored in a USB or micro SD card because it includes some special playback procedure that might not be compatible with the procedure of this unit.

TROUBLESHOOTING GUIDE

report this ad

Should this unit exhibit a problem, check the following before seeking service:No Power

  • Power is not on; slide ON/OFF switch to “ON” position to turn on the unit
  • Make sure the battery is recharged.

No Sound – General

  • External device’s volume is set to a minimum; raise the volume.

The Bluetooth device cannot pair or connect with the unit.

  • You have not activated the Bluetooth function of your device. Refer to the user manual of your device to activate the Bluetooth function.
  • The unit is already connected with another Bluetooth device; disconnect that device and then try again.

SPECIFICATIONS

RECHARGEABLE BATTERYBattery Type: 3.7V 1200mAh Lithium-ion BatteryCharging power: DC 5.0V 500mAOperating Time: Approx. 6 hours at 50% volume after fully chargedCharging Time: Approx. 3 hours

BLUETOOTHBluetooth: 2.402-2.48GHzRF Output Power: 4 dBmBluetooth Version: V5.0Working Distance: Up to 10 meters measured in open space (wall and structures may affect the range of the device)

Specifications are subject to change without notice.

SAFETY INSTRUCTIONS

  • The ventilation should not be impeded by covering the ventilation openings with items such as newspapers. table-cloths. curtains. etc.
  • No naked flame sources, such as lighted candles. should be placed on the apparatus.
  • The use of apparatus in moderate climates.
  • The apparatus should not be exposed to dripping or splashing.
  • Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation.
  • Do not place objects filled with liquids. such as vases. on the
  • The Marking plate is located at the back of the device.
  • Under the influence of electrical fast transient or/and electrostatic phenomenon, the product may malfunction and require the user to power reset.

If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)

NEW ONE S.A.S10, Rue de la Mission, 25480 Ecole Valentin, France

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,