Nanoleaf Essentials A19/A60 User Guide

Table of Contents

Nanoleaf Essentials A19/A60

Assembly

WARNINGS & CAUTIONS

Please read this safety information carefully and keep this document for future reference. Help articles and customer support is always available at https://helpdesk.nanoleaf.me/. This Nanoleaf® product is not designed, certified, nor intended for use in: enclosed locations that limit the flow of air and/or trap heat which contributes to an environment temperature over 45 degrees Celsius; emergency exits, emergency lighting, or other use cases involving critical systems for human safety; in conjunction with 3rd party devices that are not approved by Nanoleaf® for use with Nanoleaf® products; locations or use cases where there is a risk of electric shock; out door areas, regardless of weather conditions; wet or damp conditions; excessively humid areas; regions or countries other than that in which the product was intended for and certified for sale in. Risk of electric shock– do not use where directly exposed to water.Not for use with dimmers.Not for use in totally enclosed luminaires.When using this Nanoleaf® product: Always install the luminaire in accordance with your local building code and consult a qualified electrician if necessary.Do not open or disassemble the device, as this will void the warranty and make the product unsafe for use.While connected to the electrical supply of the building, do not place any metallic or conductive objects near any exposed metal contacts on any component.Unplug the power supply unit from the power source before moving the device.Do not allow small children to operate this device without adult supervision. Do not step on any part of the device, as this will cause breakage.Do not submerge any part of the device in water, or expose any part of the device to water. It’s often unwise to stick your fingers (or other parts of your person or conductive things connected to your person) in dark places that you can’t see inside.Always practice safe play with battery operated and plug-in devices.

CLEANING AND MAINTENANCE

Do not clean the device with liquid or sprays when it is connected to power. Clean with a soft dry cloth, and do not use harsh cleaning agents. Manage in accordance with disposal laws in your area.

RADIO FREQUENCY RANGE

Bluetooth, Thread: 2400-2483.5 MHz, Max RF e.i.r.p power < 10dBm

CE INFORMATION

For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lamp holders and may impair contact making and lamp retention. NanoGrid Limited (Nanoleaf®) hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity is available at www.nanoleaf.me/eudoc/.

WARRANTY

This product is covered by a limited warranty from Nanoleaf®: a two-year complimentary replacement of defective hardware. For full details visit: www.nanoleaf.me/warranty.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.

Rated Power: 9WRating Input: 100V–240V, 50/60GHzColor Temperature: 2700-6500K, RGBCWLuminous Flux: >806lm +/- 10% @2700-6500K, >1100lm @6500KDimmable: App or voiceDimensions: 6 cm x 11 cm

Models:NL45-0800WT120E26NL45-0800WT240E27NL45-0800WT240B22NL45-0800WT120E26-TWNL45-0800WT120E26-JPNL45-0800WT240E27-KRNL45-0800WT240E27-CNFCC ID: 2AEWY-NL45IC: 20489-NL45

Still Need Help?nanoleaf.me/support

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:‐‐ Reorient or relocate the receiving antenna.‐‐ Increase the separation between the equipment and receiver.‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.‐‐ Consult the dealer or an experienced radio/TV technician for help.

Nanoleaf Canada#400 – 100 Front Street East Toronto, ON M5A 1E1, Canada

Nanoleaf Europe SAS10 Rue du Capitaine Ferber 92130 Issy-les-Moulineaux France

ManufacturerNanoGrid Limited#1301-483A Castle Peak Road, Kowloon, Hong Kong

@nanoleaf@thenanoleaf