neato D8 Intelligent Robot Vacuum User Guide

Table of Contents

User guideD8 | D9 | D10

Meet your Neato Intelligent Robot Vacuum

Congratulations on choosing the Neato robot vacuum.Your Neato is designed from the ground up to deliver unparalleled performance and ease of use that will revolutionize your vacuuming experience.We know you are excited to start using your Neato. Please take a few moments to read this manual and become familiar with your Neato to ensure you get the most benefit from using it.IMPORTANT! Read before continuing with the setupTo ensure an optimum experience, observe the following guidelines:

Keep your Neato indoors. It was not designed for outdoor use.
Although Neato robots have a smart navigation system to avoid obstacles, your Neato may occasionally bump into furniture, objects, pets, and people.
Remove small objects on the floor, such as stray socks, jewelry, and cords, as well as items that may be damaged by bumping.
If the area to be cleaned has a cliff, drop, balcony, fireplace, stairs, or other areas where your Neato could fall or that represent danger, place a physical barrier or create a No-Go Zone. Neato Robotics is not responsible for any damage to furniture, rugs, or flooring.
Neato rotating brush works like the brush in a regular upright vacuum cleaner. Do not use the Neato on floors or rugs (especially those with fringes) where you would not use a regular upright vacuum.
Shiny surfaces and black floors might cause navigation problems.
Watch your Neato during the first few cleaning runs. Adjust the cleaning environment to optimize the robot’s navigation. For example:• Move or cover pet bowls and plant trays to keep your Neato away from liquids and wet areas.• Clear the area of small items such as toys and clothing.• Tie up wires, curtains, and other low-hanging items.

Related documentsIn addition to this User Guide, the following documents are supplied with your Neato:

Quick start guide — contains instructions to get your Neato up and running in the shortest possible time.
Important information & warranty — contains safety, warranty, and other important information about your Neato.

Getting Help?For helpful information, including how-to videos, frequently asked questions, and tips & tricks for optimal operation, go to https://neatorobotics.com/support. On your MyNeato app, you can also tap to contact Neato Customer Care.If you need additional assistance, we are here to help. Contact us at: neatorobotics.com/customer-care.

Getting to know your Neato robot

1 Power adapter (detachable supply unit)2 Laser cover3 Top4 Dirt bin and filter5 Handle6 Charge base7 Battery icon8 Wi-Fi icon9 Play button10 Info button11 Front bumper

12 Brush13 Wall following sensor window14 Side brush15 Wheels16 Drop sensor window17 Charging contacts18 Brush guard19 Battery door20 Bum rollers21 Cleaning tool

BATTERY LED

WHEN THE NEATO ROBOT IS…	BATTERY LED COLOR AND BEHAVIOR	MEANING (BATTERY CAPACITY LEVEL)
Off the charging base	Green	The battery level is full. Ready to clean.
Yellow	The battery level is low. Move to charge base.
Steady red	The battery level is critically low. Move to charge base.
Fast blinking red	The battery has a fault and must be serviced.
On the charging base	Steady green	Battery power is at full charge. Ready to clean.
Slow pulsing green	Battery power is at medium and the battery is charging.
Slow pulsing yellow	Battery power is low and the battery is charging.
Slow pulsing red	Battery power is critically low and the battery is charging.
Fast blinking red	The battery has a fault and must be serviced.

WI-Fl LED

WI-FI LED COLOR AND BEHAVIOR	MEANING
White	Neato is connected to Wi-Fi.
Pulsing white	Neato is trying to pair to the app via Bluetooth or connect to Wi-Fi.
Off	Neato is not connected to Wi-Fi.

PLAY BUTTON LED

PLAY LED COLOR AND BEHAVIOR	DESCRIPTION
White	Neato is awake and ready to clean or the robot is cleaning.
Red sustained	An error has occurred. Press the Info button to find out more about the error.
Pulsing white	Neato is paused.
Off	Neato is sleeping or powered off.

Preparing to use your Neato robot

Preparing to use your Neato robotBefore you start using your Neato, perform the setup instructions in this chapter.Positioning the charging baseBefore positioning the charging base, select a clear area with good Wi-Fi coverage.Begin by inserting the plug behind the charging base into an AC outlet. Shorten the cord as needed by wrapping it behind the charging base.Make sure the charging base is against the wall and plugged in securely.Place Neato against the charging base. When docked properly, the battery LED on the robot vacuum lights up.

Checking the batteryYour Neato battery comes partially charged. Before you use your Neato for the first time, position it at the charging base and allow the robot to charge until the battery LED becomes green (up to 3 hours).NOTE: Always charge your Neato using the supplied Neato Original charge base and battery.Auto recharge and resumeIf the area to be cleaned is very large, your Neato may need to recharge its battery before finishing the job. Once recharged, it will return to finish where it left off.

Connecting to the MyNeato app

IMPORTANT NOTE: You must connect your Neato to the MyNeato app before using your robot vacuum.

Confirm that the charging base is positioned properly and within good Wi-Fi coverage.
Use this QR Code to download the MyNeato app from the Internet to your phone.
On your phone settings, turn on Bluetooth communication.
Complete the connection procedure by following the steps on the MyNeato app.
During the procedure, you will be asked whether you want to receive notifications from the MyNeato app.Allowing notifications permits your Neato to notify you about its status and alerts.

http://www.neatorobotics.com/my-neato-app

The MyNeato app allows you to:

Start and pause your Neato when you are not home
Select cleaning modes: Eco, Turbo
Get a cleaning coverage map
Create a Routine to schedule cleanings
Receive cleaning status notifications instantly
View battery status
Receive notifications about Neato software updates
Receive maintenance alerts and context-sensitive help to keep your Neato operation at its peak
Get feature updates
Chat with customer support for help

Operating your Neato robot from multiple smartphonesYou can use the MyNeato app on multiple smart devices in a household to operate the same Neato. Just download the MyNeato app to other smartphones and then sign in to the same MyNeato account using the email and password originally used to set up your Neato.

Selecting a cleaning mode on the MyNeato app

Cleaning modesBefore you start, cleaning either with the MyNeato app or manually, you can select a cleaning mode to determine how your robot vacuum cleans.By default, Neato uses Eco Mode. However, you can use the MyNeato app to change modes to suit your cleaning requirements. The following table describes the cleaning modes.

CLEANING MODES	DESCRIPTION
ECO	Set your Neato’s brush and blower to medium power. This mode allows your Neato to clean the largest area on a single charge. Eco mode is ideal for hardwood floors and is the quietest model. This is the default mode.
TURBO	Set your Neato’s brush and blower to high power.This mode provides stronger suction and a faster rotating brush. Turbo Mode is ideal for carpets but consumes more battery power than Eco Mode.

NOTE: The cleaning mode you select applies to subsequent cleaning operations performed using the MyNeato app as well as a clean start by pressing the play button on your Neato.Extra Care navigationIn addition to the listed cleaning modes, your Neato supports an Extra Care navigation feature that is useful if you have especially delicate furniture. This feature is enabled from the same page on the MyNeato app where you select cleaning modes. When this feature is enabled, your Neato navigates more carefully and leaves a wider buffer around objects such as delicate pieces of furniture and chair legs. Extra Care navigation is available on D9 and D10 only.

Cleaning with the MyNeato app

Using the MyNeato app to cleanYour Neato cleans the entire floor plan on one level, moving automatically from room to room. From the app, you can start cleaning, pause, resume, and cancel to return to charge base.

To clean a house:

Remove small objects and loose cords from the floor.
Make sure that your Neato is placed at the charging base.
Tap to start cleaning.
Tap to pause cleaning.
Tap to continue cleaning.
Tap Cancel and return to base button to send your Neato back to the charging base.

During cleaning, your Neato comes off its charge base, explores its surroundings, and starts cleaning in sections approximately 15 x 15 feet (4.6 x 4.6 meters) in size, depending on layout and furniture. Your Neato continues to clean the entire room on one level, section by section until the entire area is cleaned. It then moves from room to room to continue cleaning. If your Neato cleans a room partially, it will return to complete that room before finishing the job.Moving a Neato robot mid-cleaningDo not pick up your Neato while it is moving. Otherwise, it can become disoriented, deviate from its normal smart behavior, and have difficulty finding its charge base.To pause the cleaning, press once while your Neato is cleaning. If you then lift your Neato, put it back down within 1 foot of where you picked it up.

Creating a Floor Plan Map and No-Go Zones

Creating a Floor Plan MapCreating a floor plan map of your house allows you to set up No-Go Zones, so you can tell your Neato which areas of your house you want to avoid cleaning.After your Neato performs its first cleaning using the MyNeato app, it creates a map of your house automatically. To view the map, tap in the MyNeato app. For best results, remove small objects and loose cords from the floor and start cleaning the whole house on your first run.NOTE: You must start cleaning from the charging base to create a Floor Plan Map.From the map view, you can select to create No-Go Zones, name, and delete your maps.NOTE: If your Neato has not yet performed an initial cleaning, you will not see a map. In this case, tap to start cleaning. A floor plan will be created after the first cleaning.

Creating No-Go ZonesNo-Go Zones allow you to tell your Neato to avoid areas that should not be cleaned, such as a child’s play area or a dog bowl.No-Go Zones are easy to set up using the MyNeato app:

Go to map view by tapping
Create No-Go Zones in your map, by tapping
Select
Drag a No-Go Zone rectangle to the area of the map that you want to select. You can adjust the No-Go Zone size by enlarging or reducing the No-Go Zone rectangle. Repeat step 3 to add more No-Go Zones to the map.
Tap on the top left of your screen and your No-Go Zones will be saved automatically.

Schedule cleaning Routines and locate your Neato robot

Creating Routines to schedule cleaningsYou can schedule your Neato to clean an entire house on certain days and times by creating a Routine.To set up a Routine:

Select in the MyNeato app.
Tap to add a new Routine.
Select day(s) and time during the week to schedule your cleaning.
Select Cleaning Modes
Tap the to save your Routine

Locating your Neato robotThere may be times when your Neato becomes stuck or stops at an unknown location in your house. When you tap your Neato will make a sound that will guide you to find its physical location.Updating your Neato robotTechnology improves over time, and so will your Neato. For this reason, Neato will automatically update your robot and send notifications to your MyNeato app, so you always have the latest features as soon as they are available.Troubleshooting your deviceIf an error occurs while operating your Neato, click the error link in the MyNeato app to see what the error means and what corrective action to take.For more information, visit https://neatorobotics.com/support.

Manually operating your Neato robot

NOTE: Before you start manual cleaning for the first time, you must connect your Neato to the MyNeato app. See Connecting to the MyNeato App.Cleaning an entire houseTo clean your house, confirm that the Play LED is white. You can initiate cleaning by pressing once. Your Neato robot will clean the entire floor on one level automatically moving from room to room.PLAY BUTTON

PRESSING THE PLAY BUTTON…	PERFORMS THIS ACTION…
Press once when the Play LED is white.	Initiates a cleaning run.
Press once while the Neato is cleaning.	Pauses the cleaning run.
Press twice while the Neato is cleaning.	Cancels the cleaning run.
Long press for five seconds.	Shuts down the Neato robot.

INFORMATION BUTTON

PRESSING THE INFO BUTTON…	PERFORMS THIS ACTION…
Short press when the Info button is white.	Hear information about the Neato robot’s status.
Short press when the Info button is red.	Hear information about an error and how to resolve it.
Long press.	Hear information that the user is connected to the correct robot.
Long press while also pressing the Play button.	Performs a factory reset.

Maintaining your Neato robot

For reliable operation, check and clean your Neato robot’s brushes and empty its dirt bin after every use or as needed, depending on your environment. Failing to do this maintenance may impact your Neato’s performance and may void your warranty coverage.

Emptying dirt bin and cleaning filtersAfter each use, empty the dirt bin, clean the airways and opening, and clean the filter. To remove the filter, pinch the handle and pull out. Replace the filter every 1 to 2 months or more frequently as needed.Cleaning the brushWe recommend that you clean the brush monthly. Remove the side brush and set it aside. Follow the steps below:

Cleaning the top of the Neato robotClean the top of your Neato and the area around the laser top with a soft cotton cloth.

Cleaning the sensorsUse a dry cotton swab to clean the three drop sensor windows on the bottom of your Neato.

Accessories

Always purchase Neato Original accessories and parts:

Batteries
Filters
Brushes
Cleaning tool
Charge base

report this ad

For information about accessories and replacement parts for your Neato, go to neatorobotics.com.Using unauthorized or third-party (non-Neato Original) accessories can damage your Neato and will void your warranty.Recommended replacement schedule depends on use.Filters – every 1 to 2 monthsBrushes – every 6 to 12 monthsBatteries – every 12 to 18 months

Neato Robotics®, Inc.50 Rio Robles San Jose, CA 95134, USANeatoRobotics.comP/N 500-0102 Rev A

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-30

neato

admin

Tags:

D10, D8, D9, Intelligent Robot Vacuum, neato