NEBO 6726 SLYDE KING Rechargeable Work Light & Flashlight Instruction Manual
The OC ” (Optimized Clarity) Technology creates a perfectly dispersed beam of pristine light when used in flood mode.
CHARGING INSTRUCTIONS
SLYDE™KING should be connected to a power source using the Micro Charging Cable. Place the Micro USB input into the Port under the silicon cover. Charging light indicator will remain RED until the unit is fully charged, then it will turn BLUE.
Recharging may take up to 4 hours based on battery status.
FEATURING NEW
C•O•B is a new innovation in LED technology featuring smaller clustered LED chips that are mounted directly to the circuit board and work together as a single lighting module. C•O•B outperforms traditional lighting by up to 50 times the light output per centimeter of light source.
DESIGNED IN TEXAS MANUFACTURED IN CHINA
Warning: Do not disassemble product. Do not charge the battery if the product / battery is cracked or damaged. Do not short terminals, crush, heat above 140°F (60°C) or incinerate. Please recycle.
All copyrighted and copyrightable materials, induding, without limitation, the logo, design, text, graphics, pictures, copywriting and the selection and arrangement (“Materials”) thereof are ALL RIGHTS RESERVED Copyright 0 2018 Alliance Consumer Group.
TM REGR 4.664,971 – US PATENT D786,466 + PATENTS PENDING
QUALITY GUARANTEE
This product is guaranteed against all detects in workmanstisp and materials for the original owner for one year from the date of purchase. Damage to or failure of the flashlight or any component thereof due to alteration, misuse, battery leakage or lack of maintenance will void any and all guarantees. Damage by leakage of batteries should be taken up with the manufacturer of the battery using their damage claim instructions. For any additional information call 1400-2554081.
Register for warrantywww.NEBOTools.com
LIGHTING INSTRUCTIONS
- Press button lx to activate flashlight (top light)
- Slide up to activate work light
- Press lx to activate red light
- Press 2x to activate red flasher
- Slide down to turn OFF C•O•B
DIMMABLE BEAM
Each light mode is fully dimmable. Hold button for 1.5 seconds to activate, dimming function. Flashlight, C•O•B White and Red are dimmable.
- Light will dim from 100% to 10% over 3 seconds
- Light will flash quickly when it reaches 10% or 100% to indicate it has reached the lowest or highest light output
- Release button at any time to achieve desired brightness
- Light will continue to dim/brighten between 100% and 10% until button is released
MEMORY POWER SETTING
SLYDE™KING is equipped with memory settings for each light mode. To program memory settings, start in the OFF position. Flashlight, C•O•B White and Red have this feature.
- Double-tap the button to activate Memory Power Setting. Flashlight (top) will activate
- Follow Dimming Instructions to adjust light to desired brightness
- Press button again to move to next setting. Light will cycle through each light mode sequentially
- Set each light mode at desired brightness level
- If 100% brightness is desired amongst light modes, simply press button to move to the next mode
- Press again to turn OFF
To reprogram, simply repeat the previous steps.
DIRECT-TO-RED
Press and hold the button while opening the C•O•B section to activate RED directly. Press button again to cycle through remaining C•O•B light modes.
Red C•O•B is a low-signature light, which ensures stealth in the dark, enhances night vision and makes reading in little to no light possible.
[xyz-ips snippet=”download-snippet”]