nedis BTWV10GN Smart Bluetooth Water Control User Guide
Table of Contents
nedis BTWV10GN Smart Bluetooth Water Control User Guide
Intended use
The Nedis BTWV10GN is a Bluetooth water control system that allows you to schedule irrigation.The product can be controlled with the Nedis SmartLife app. This product is intended for outdoor use only. The product is not intended for professional use. This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision. Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
Smart Bluetooth Water Control
Article number
BTWV1 OGN
Max. radio transmit power
10 dBm
Antenna gain
2 dBi
Frequency range
2.412 – 2.484 MHz
Working temperature
3 °C – 50 °C
Working humidity
0 % — 90 % (RH)
Working water pressure
0.5 – 8 bar (10 -120 PSI)
Working water flow
5 – 35 L/min
Waterproof
IP54
Watering frequency
Every day or any day
Watering times
Max. 3 times per day
Watering duration
1 min -11 h 59 min
Mist duration
5 s – 59 s
Max. interval time
15 min 59 s
Misting period
1 min – 11 h 59 min
Type of battery
4 x AA (not included)
Main parts (image A)
Status indicator LED
Control button
Slot for battery compartment
Battery compartment
Water filter
Water inlet
Water outlet
App overview (image B)
Last water usage
Battery status / Currently active mode / Remaining time until next irrigation
Manual mode
Parameter
Switch between Celsius and Fahrenheit.
Adjust irrigation schedules
Sensor
Details and instructions
Safety instructions
WARNING
Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not allow children to play with it or touch it.
Keep the product out of reach from children.
Only use batteries that correspond with the specifications.
In the event of a leaking battery, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Remove the battery before the product is scrapped.
Properly dispose of the empty battery.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Installing the Nedis SmartLife app
Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis Smartlife app on your phone.
Create an account with your e-mail address and tap Continue. You will receive a verification code on your e-mail address.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with and tap Done.
Placing the batteries (image C)
Use only size AA batteries (not included) for this product.Do not use rechargeable batteries
Pull the tabs of the battery compartment A4, to take A4 out of the product.
Place 4 batteries into A4.Make sure to match the (+) and (-) polarity markings.
Place A4 into the slot for the battery compartment A3.Make sure A4 is completely closed to ensure no water can run into A4The status indicator LED A1 starts blinking.
Installing the product (image D)
Connect the water inlet A6 to an outside tap (not included) and the water outlet A7 to a garden hose or sprinkler (not included).
Make sure to fasten the tap and the hose tightly to avoid water leakage.
Connecting the app
Enable Bluetooth on your phone.
Open the Nedis Smartlife app on your phone.Make sure your phone is within 30 meters (open area) from the product.The product automatically connects with the app. The app notificates that there is a new product available to connect to the app.
Follow the instructions in the app.The product appears in the list of connected products.
Press the control button A2 to activate the product.
Open the water tap to the desired position.Disconnect the product when freezing temperatures are expected, to avoid potential freeze damage.Use the app to set and operate the product.For more information about the working and possibilities of the app, consult the extended manual online.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product BTWV10GN from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/btwv10gn#support
For additional information regarding the compliance, contact the customer service: