nedis Fully Wireless Earphones voice control User Guide

Fully Wireless Earphones

with voice control
HPBT3052WT

ned.is/hpbt3052wt

 

A

Quick start guide

Fully Wireless Earphones                     HPBT3052WT

For more information see the extended manual online: ned.is/hpbt3052wt

Intended useThe Nedis HPBT3052WT is a pair of fully wireless earphones.The product can be paired with any Bluetooth enabled audio/video device.The earphones can be charged up to 4 times in the fully charged case.Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product Fully Wireless Earphones
Article number HPBT3052WT
Power input 5 VDC / 0.3 A
Bluetooth® version 5.0
Bluetooth® frequency range 2402 – 2480 MHz
Frequency response 20 – 20,000 Hz
Max. radio transmit power 4 dBm
Impedance 32 Ω
Sensitivity 103 ± 3 dB
Driver size 10 mm
Voice control Siri, Google Assistant
Battery type Lithium-Polymer (earphones)

Lithium-Polymer (charging case)
Charging time Up to 2 hours
Case recharges Up to 4 times
Battery capacity earphones 2 x 30 mAh
Battery capacity charging case 300 mAh
Play time Up to 3 hours
Waterproof No

4

Main parts (image A)

  1. Lid
  2. Micro USB port
  3. Left earphone slot
  4. Charging indicator LED
  5. Status indicator LED
  6. Left earphone button
  7. Right earphone slot
  8. Right earphone button
  9. Micro USB cable

Safety instructions

WARNING

To prevent possible hearing damage, do not listen at high volume levels for long periods.

  • Only use the product as described in this document.
  • Do not use the product if a part is damaged or defective.Replace a damaged or defective product immediately.
  • Do not expose the product to direct sunlight, naked flames or heat.
  • Do not expose the product to water or moisture.
  • Do not drop the product and avoid bumping.
  • Do not open the product.
  • Keep the product out of reach from children.
  • This product is not a toy. Never allow children or pets to play with this product.
  • Using earphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
  • Charge the battery for at least 2 hours when you use it for the first time.
  • Only use the provided USB charging cable.
  • Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
  • Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
  • Disconnect the product from the power source and other equipment if problems occur.
  • This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.

5

  • Do not short circuit.
  • Do not repair the product. If damaged, it must be properly disposed of.
Pairing the earphones to a Bluetooth audio source
  1. Take the earphones out of the charging case. The earphones switch on automatically. Press and hold both earphone buttons A A for 2 seconds to switch the earphones on manually.
  2. The status indicator LED A blinks red and blue to indicate pairing mode is active.
  3. Enable Bluetooth on the device you want to pair the earphones with.
  4. Select “HPBT3052WT” from the list of available Bluetooth devices on your device.
Charging the product

1. Plug the Micro USB cable A into the Micro USB port A of the charging case.2. Plug the other end of A into a computer or power adapter.3. Plug the power adapter into a power outlet. The charging indicator LED A lights up red when charging.A lights up red when the case is fully charged.

4. Place the earphones into the respective slots A A and close the lid A to charge the earphones.5. The status indicator LED A on the earphones lights up red.6. A switches off when the earphones are fully charged. The earphones and the charging case can charge simultaneously.

Making phone calls

With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.

  • To answer an incoming call, press A or A.
  • To reject an incoming call, press and hold A or A for 2 seconds.
  • To end a call, press A or A.
Controlling the music
  • Press A or A to play or pause the music.

6

  • Double press A to skip to the next track.
  • Double press A to skip to the previous track.

Add Siri/Google Assistant functionPress and hold A or A for 3 seconds to activate Siri/Google Assistant.

Declaration of ConformityWe, Nedis B.V. declare as manufacturer that the product HPBT3052WT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/hpbt3052wt#support

For additional information regarding the compliance, contact the customer service:Web: www.nedis.comE-mail: [email protected]Nedis B.V., de Tweeling 285215 MC’s-Hertogenbosch, the Netherlands

7

Nedis BVDe Tweeling 28, 5215 MC’s-HertogenboschThe Netherlands                                                 06/20

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,