nedis IP camera
Description
- Status indicator
- Reset button
- Speaker
- Microphone
Use
- Download and install the app “Nedis SmartLife“ fromApple App Store or Google Play Store on your mobile device.
- Launch the app “Nedis SmartLife“.
- Create a new account or log in to your existing account.
- Tap “+” to add the device.
- Select “Security Camera” from the list of products.
- Connect the power adapter to the device. Insert the mains plug of the power adapter into the wall socket.
- If the status indicator does not flash: Press the reset button.If the status indicator flashes: Confirm in the app.
- Confirm the Wi-Fi network and password.
- Enter the device name.Note: The device name will also be used for push notifications.
- Use the metal bracket to mount the camera on the wall or in an angle.
- Place the camera on the bracket and rotate to fixate.
Safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes.Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
Cleaning and maintenance
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please visit www.nedis.com/support
Telephone: +31 (0)73-5993965Email: [email protected]Website: www.nedis.com/contact
NEDIS B.V.De Tweeling 285215 MC ’s-HertogenboschTHE NETHERLANDS
References
[xyz-ips snippet=”download-snippet”]