nedis On-Ear Headphones with Bluetooth connection User Guide

On-Ear Headphoneswith Bluetooth® connectionHPBT2102BK

ned.is/hpbt2102bk

Quick start guide

HPBT2102BKOn-Ear headphones

For more information see the extended manual online: ned.is/hpbt2102bk

Intended useThe Nedis HPBT2102BK are Bluetooth headphones with which you can enjoy music at any time and anywhere.The product can be paired with any Bluetooth-enabled audio/video device.The ear cups can be folded for easy storage.Any modification of the product may have consequences for safety, warranty, and proper functioning.

Specifications

Product On-Ear headphones
Article number HPBT2102BK
Power input 5 VDC ; 0.5 A
Bluetooth® version 5.0
Bluetooth frequency range 2402 – 2480 MHz
Frequency response 20 – 20,000 Hz
Max. radio transmit power 4 dBm
Impedance 32 Ω
Driver size 40 mm
Battery type Lithium-polymer, 3.7 V /150 mAh
Charging time Up to 2 hours
Play time Up to 10 hours
Standby time 200 hours
Built-in microphone Yes
Voice control Siri, Google Assistant

Main parts (image A)

  1. Micro USB charging port
  2. Charging indicator LED
  3. Built-in microphone
  4. 3.5 mm input
  5. Status indicator LED
  6. On/off / play / pause button
  7. Previous song / Volume down button
  8. Next song / Volume up button
  9. USB power cable
  10. 3.5 mm audio jack

Safety instructions

-WARNING

  • To prevent possible hearing damage, do not listen at high volume levels for long periods.
  • Using headphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
  • Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
  • Only use the product as described in this document.
  • Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
  • Do not drop the product and avoid bumping.
  • This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
  • Disconnect the product from the power source and other equipment if problems occur.
  • Do not expose the product to water or moisture.
  • Do not use any charger other than that specifcally provided for use with the product.

Using the productDue to the wide variety of products with a Bluetooth connection, we cannot guaranty that all devices will be recognized or all operating options can function.

Charging the product

  1. Plug the USB power cable A9 into the micro USB charging port A1.
  2. Plug the other end of A9 into a computer or power adapter.

Switching on the product• Press and hold the on/off / play/pause button A6 for 3 seconds.

Pairing the headphones to a Bluetooth audio source

  1. Switch on the product.i The status indicator LED A5 blinks red and blue to indicate pairing mode is active.i If the headphones are not paired within 5 minutes, they switch off.
  2. Enable Bluetooth on the device you want to pair the headphones with.
  3. Select “HPBT2102BK” from the list of available Bluetooth devices on your device.i When paired, A5 lights up blue.i If the headphones have been paired with another device before, make sure that device is switched off.i If the headphones lose connection to the Bluetooth source, they will automatically reconnect when back in range and switched on.

Controlling the music

  • Press A6 to play or pause the music.
  • Press the next song/volume up button A8 to skip to the next song.
  • Press the previous song/volume down button A7 to go back to the start of the song. Press again to go to the previous song.

Controlling the volume

  • Press and hold A8 to increase the volume.
  • Press and hold A7 to decrease the volume.i When the volume reaches to maximum, there is a warning tone.

Making phone calls

  • To answer an incoming call, press A6.
  • To reject an incoming call, press and hold A6 for 2 seconds.
  • To end a call, press A6.

Using voice assistant

  • Double press A6 to activate the voice assistant on your mobile phone (Siri or Google assistant).

Switching off the headphones

  • Press and hold A6 for 3 seconds to switch off the headphones.

Declaration of ConformityWe, Nedis B.V. declare as manufacturer that the product HPBT2102BK from our brand Nedis®, produced in China, has been tested according to all relevant CE  standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/ HPBT2102BK#support

For additional information regarding the compliance, contact the customer service:Web: www.nedis.comE-mail: [email protected]Phone: +31 (0)73-5991055 (during office hours)Nedis B.V., de Tweeling 285215 MC ’s-Hertogenbosch, the Netherlands

Nedis BVDe Tweeling 28, 5215 MC ’s-HertogenboschThe Netherlands

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,