nedis Wi-Fi Video Doorphone User Guide

Nedis Wi-Fi Video Doorphone

Parts

Description

  1. Doorbell button
  2. Status indicator
  3. Camera
  4. Microphone
  5. Speaker
  6. Reset button
  7. Memory card slot (microSD)
  8. External power port

Safety Instruction

  • To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
  • Disconnect the product from the mains and other equipment if a problem should occur.
  • Read the manual carefully before use. Keep the manual for future reference.
  • Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
  • Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.

Use

  1. Download and install the app “Nedis SmartLife” from Apple App Store or Google Play Store on your mobile device.
  2. Launch the app “Nedis SmartLife”.
  3. Create a new account or log in to your existing account.
  4. Tap “+” to add the device.
  5. Select “Security Camera” from the list of products.
  6. Optional: Insert a memory card into the memory card slot.
  7. Connect the external power (8-24 VAC) through the bracket (and the angle adjuster) to the rear of the unit. The transformer of your existing wired doorbell can often be used to power the device. Remove the traditional chime and connect the 2 wires together to close the electric circuit. If the video doorphone has power issues, replace the transformer with a 12V transformer or higher.
  8. If the status indicator does not flash: Press the reset button.If the status indicator flashes: Confirm in the app.
  9. Confirm the Wi-Fi network and password.
  10. Enter the device name.Note: The device name will also be used for push notifications.
  11. Mount the bracket (and the angle adjuster) on the required location using the screws.
  12. Place the camera into the bracket (top first) and lock the camera with the bolt in the bottom of the bracket.

Cleaning and maintenance Warning!

  • Do not use cleaning solvents or abrasives.
  • Do not clean the inside of the device.
  • Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
  • Clean the outside of the device using a soft, damp cloth.

SupportIf you need further help or have comments or suggestions please visit www.nedis.com/supportContactNEDIS B.V., De Tweeling 28, 5215 MC ‘s-Hertogenbosch, The Netherlands

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,