nedis WIFIPO120FWT Smart Power Plug
Description
- On/off button Reset button
- On off indicator
- Connection status indicator
Use
- Download and install the app “Nedis SmartLife” from Apple App Store or Google Play Store on your mobile device.
- Launch the app “Nedis SmartLife”.
- Create a new account or log in to your existing account.
- Tap “+” to add the device.
- Select “Electrical outlet” from the list of products.
- Plug in the smart power plug.
- If the status indicator does not flash: Press and hold the reset button for 6 seconds. If the status indicator flashes: Confirm in the app.
- Confrm the Wi-Fi network and password.
- Enter the device name. Note: The device name will also be used by Amazon Alexa and Google Home.
Safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- Do not touch the device with wet hands.
Cleaning and maintenance
Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please visit www.nedis.com/support
T: +31 (0)73-5993965E: [email protected]W: www.nedis.com/contact
NEDIS B.V. De Tweeling 28 5215 MC ’s-Hertogenbosch THE NETHERLANDS
References
[xyz-ips snippet=”download-snippet”]