nedis Wireless DAB+ radio headphones User Guide

nedis Wireless DAB+ radio headphones 

Overview

Parts list

  1. Display
  2. Frequency + / skip to next song
  3. Frequency – / skip to previous song
  4. Menu / Enter button
  5. Preset / Save button
  6. Audio port (3.5mm)
  7. Microphone
  8.  Micro USB port
  9. Status indicator LED
  10. Power / Mode button
  11. Info / Scan button
  12. VOL+ button
  13. VOL- button

Charging the headphones

  • Connect the USB cable to the micro USB port 8.
  • The status indicator LED 9 on the headphones burns red to indicate the headphones are charging.
  • The status indicator LED 9 on the headphones turns green when the headphones are fully charged.

Switching on the headphonesSwitch on the headphones by pressing q. The display shows “Welcome to digital radio”

Switching modeWhile the headphones are switched on, repeatedly press q to switch between DAB, FM tuning or Bluetooth mode. The display shows what mode is currently selected.

DAB mode

  • In DAB mode, press and hold w to search for available digital radio stations.
  • The display shows the search progression in percentages. 44After the search is finished, all available stations will automatically be saved.
  • Press 2 or 3 to switch between the saved stations.
  • Press 4 to confirm.

FM mode

  1. In FM mode, press w. The display shows the current frequency.
  2. Press and hold w to search for available FM radio stations. 44After the search is finished, all available stations will automatically be saved.Press 2 or 3 to switch between the saved stations.

Bluetooth modePairing the headphones to a Bluetooth audio source

  1. While the headphones are switched off, press and hold q to enter pairing mode. The display shows “BT Connect”.
  2. Enable bluetooth on the device you want to pair the headphones with.
  3. Select “HPDB200BK” from the list of available Bluetooth devices on your device.The display shows “Connected”. 44If the headphones lose connection to the Bluetooth source, they will automatically reconnect when back in range and switched on.

Controlling the volume• Press e to increase the volume.• Press r to decrease the volume.

Controlling the music• Press 4 to play or pause the music• Press 2 to skip to the next song.• Press 4 to go back to the start of the song. Press again to go to the previous song.

Making phone callsWith the headphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the headphones. When you receive an incoming phone call, the display shows “Call in” and the phone will ring through the speakers of the headphones.

  • To answer an incoming call, press 4. The display shows “Calling”.
  • To reject an incoming call, press and hold 4 for 2 seconds.
  • To end a call, press 4.
  • To cancel an outgoing phone call, press 4.
  • To quickly redial the last called number, double press 4.

Settings menuPress and hold 4 for 2 seconds to enter the settings menu. Here you can adjust the date and time, the display contrast and brightness or perform a factory reset among other options.

Low battery alarmWhen the battery is low, an audbile signal will be given through the speakers and the display will show “Low power”.Switching off the headphonesPress and hold q for 2 seconds to switch off the headphones.Wired connectionWhen the batteries of the headphones are drained, you can still listen to your audio source by connecting the headphones directly to the audio source, using the 3.5mm audio cable.

Specifications

Product Wireless Headphones | DAB+ / FM

/ Bluetooth®
Article number HPDB200BK
Functions DAB+ / FM / Bluetooth®
DAB frequency range 169 – 239 MHz
FM frequency range 87 – 108 MHz
Bluetooth frequency range 2.402 – 2.480 GHz
Bluetooth® version 5.0
Maximum Transmission  power +4 dBm
Maximum antenna gain 0 dBi
Battery type Rechargeable Lithium battery (1200 mAh)
Charging input power 5V / 500mA
Charging time ±3.5 hours
Playback / talk time Up to 9 hours
Standby time Up to 110 hours
Driver unit Φ 40 mm
Impedance 32 Ω
Frequency response 20 – 20.000 Hz

Declaration of ConformityWe, Nedis B.V. declare as manufacturer that the product HPDB200BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation. The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/HPDB200BK#support

For additional information regarding the compliance, contact the customer service:Web: www.nedis.comE-mail: [email protected]Phone: +31 (0)73-5991055 (during office hours)Nedis B.V., de Tweeling 285215 MC ’s-Hertogenbosch, the Netherlands

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,