Netgear Dual Band 802.11ac Wireless Access Point DataSheet
WAC120
Features
The NETGEAR® Dual Band 802.11ac Wireless Access Point (AP) delivers high performance for Small Office and Home Office (SOHO) deployments and supports dual band concurrent operation at 2.4GHz and 5GHz with combined throughput of 1.2Gbps (300Mbps at 2.4GHz and 867Mbps at 5GHz). The WAC120 Wireless 802.11ac Access Point provides standalone configuration with easy setup for a reliable, high-performance, and affordable wireless solution.
High performance and superior coverage
- Up to 4x the speed of 802.11n networks
- Maximize coverage for optimal deployment for SOHO
Comprehensive security
- Supports wireless security features (WPA, WPA2)
- MAC based Access Control List to protect against intruders
Interoperate with both new and legacy clients
- Support latest 802.11ac wireless clients to achieve maximum speed
- Backward compatible to allow legacy devices to connect at their fastest speed
Easy to Configure
- Simple setup in minutes with intuitive Graphical User Interface (GUI)
Standalone AP Deployment
Technical Specifications
Physical Characteristics
Power
- Country-specific plug: 12V/1A (12W)
- 1 Amp power adapter
- Power consumption: 8.1W (maximum)
Physical Dimensions
- Dimensions (L x W x H): 7.08 x 6.69 x 2.36in (180 x 170 x 60mm)
Weight
- Weight: 0.71lb (322g)
Mounting
- Desktop
Interfaces and Indicators
Physical Interfaces
- One (1) 10/100/1000BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X)
LEDs
- Power/Test, ACT, LAN, Wireless
Default Reset
Environmental Conditions
Operating Temperature
- 32° to 104°F (0° to 40°C)
Storage Temperature
- -4° to 158°F (-20° to 70°C)
Operating Relative Humidity
- 10-90%
Storage Humidity
- 5-95%
MTBF
- @ 25° C > 375,000 hours
- @ 50° C > 125,000 hours
RF Characteristics
Standards
- IEEE 802.11ac specification
- IEEE 802.11n 2.0 specification
- IEEE 802.11g
- IEEE 802.11b
- IEEE 802.11a
Frequency Band
- 2.4GHz and 5GHz concurrent operation
Maximum Theoretical Throughput
- 300Mbps (2.4GHz)
- 867Mbps (5GHz)
Maximum Number of Clients
- 128
Network Management
Deployment options
- Standalone
- Web UI
Access Point
- Antenna: 2dBi (internal)
Advanced Wireless
- WDS Point-to-point wireless bridge mode
- WDS Point-to-multipoint wireless bridge mode
- Wireless client mode
Security
- Wired Equivalent Privacy (WEP) Encryption
- WiFi Protected Access Pre-shared Key (WPA-PSK, WPA2-PSK)
- MAC Address filtering
- 1 BSSID
MAC ACL
Wireless Client Mode
VPN Pass-through
802.11e WMM
- (Wireless multimedia mode) for QoS
Simultaneous Bridge/Client Association
Package Contents
- 802.11ac Wireless AP (WAC120)
- Ethernet cable
- Wall mount kit
- Installation guide
- Power adapter, localized to country of sale
- Warranty/support information card
Warranty and Support
Warranty
- NETGEAR 3-year Warranty* (including the power adapter)
Safety Certification
- CE (EN60950-1)
Optional Support
- PMB0351: 5 years OnCall 24×7
- PMB0331: 3 years OnCall 24×7
- PMB0311: 1 year OnCall 24×7
- PRR0351: 5 years XPressHW
- PRR0331: 3 years XPressHW
Product Ordering Information
- WAC120-100AUS
- WAC120-100NAS
- WAC120-100PES
- WAC120-100PRS
- WAC120-100UKS
* 3-Year Warranty cover hardware, fans, and internal power supplies – not external power supplies or software. Warranty is only valid for the original purchaser, and modifications to product may void the warranty. See http://www.netgear.com/about/warranty/ for details. Basic phone support for 90 days from purchase when purchased from a NETGEAR authorized reseller.
NETGEAR, the NETGEAR Logo, and ProSAFE are trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved. © 2015 NETGEAR, Inc.
Netgear WAC120 Dual Band 802.11ac Wireless Access Point DataSheet – Netgear WAC120 Dual Band 802.11ac Wireless Access Point DataSheet –
[xyz-ips snippet=”download-snippet”]