NEUMANN 2-CH Microphone Preamplifier V 402 User Guide

NEUMANN.BERLINV 402Quick Guide

In the box

Power

Setup

  1. Reduce Volume
  2. Switch ON
  3. Connect

Controls

Analog Audio Inputs & Outputs / Power

Specifications

Mains Power Supply
Supply Voltage; frequency 100-120 V, 220-240 V; 50 Hz/60 Hz
Power Consumption max. 25 W
Microphone Inputs
Connector 2 x XLR 3 F
Input Impedance approx. 3 kΩ
Minimum Gain +20 dB (PAD of)
Maximum Gain +60 dB (PAD of)
Attenuation PAD switchable of/-20 dB
Maximum Input Level (PAD of) +8 dBu
Maximum Input Level (PAD on) +28 dBu
Power Supply (P48, IEC 61938) 48 V, max. 10 mA, switchable on/of
Hi-Z
Hi-Z Input active switchable on/of
Connector jack 6.3 mm (1/4″), mono, unbalanced (front)
Input Impedance 3.3 MΩ
Maximum Input Level +21 dBu
Minimum Gain 0 dB (PAD of)
Maximum Gain +40 dB (PAD of)
Bargraphs
per channel: -24 dBu to +24 dBu in 6 dB stepsPeak Hold indication @ +24 dBu (hold time approx. 3 sec.)
Headphone Output
Mono / Stereo switchable
Connector jack 6.3 mm (1/4″), stereo (front)
Volume Control for left & right channel + Master
Output Impedance approx. 2 Ω
Maximum Output Voltage +20 dBu into 150 Ω load impedance
Outputs
Connector 2 x XLR 3 M
Output Impedance approx. 200 Ω
Maximum Output Voltage +26 dBu into 1 kΩ load impedance
Ground Lift switchable on/of
Amplifier
Frequency Range <10 Hz to >100 kHz (-3 40 dB Gain)
High Pass Filter (HPF, 60 Hz, 12 dB/oct) switchable on/of
General
Dimensions (H x W x D) 89 mm x 463 mm x 242 mm
Weight 6.2 kg
Operating Conditions    0°C to +50°C; < 75% +40°C; non-condensing
Transport/Storage Conditions -25°C to +70°C; < 95% RH; non-condensing
Working Altitude < 2000 m

A complete list of specifications can be found on the product page at www.neumann.com.

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by