User Manual for LED String Lights with Dimmer Control
Package contents
LED S14 light bulb x15cable with Empty E26 Sockets x1User ManualxlDimmer Controlxl
Specifications
| String Light | |
| Item 1 | Data |
| Power | 22.5W total |
| Input Voltage | AC120V 60HZ |
| Bulb Quantity | 15 bulbs |
| Wire Length | 49 ft |
| Bulb size | width1.77x Length3.46 inches |
| Dimmer Control | |
| Item 2 | Data |
| Maximum Operation Power | 150W |
| Input | AC120V 60Hz |
| Control Distance | 30M |
1
Installation instruction
1.Install cable with the empty sockets in desired location,
2.Screw bulbs into the empty sockets one by one.
2
3.Connect the Dimming Kit to the String Lights (Overall power < 150W).Now you can use the Remote Controller to adjust the brightness of the String Lights.
Remote Operation:
Tip : Long press + / – to increase/decrease the brightness.
3
Warning & Caution:
- Do not repair, disassemble, or modify the product without approval.
- Do not place the light near any heat sources.
- The light bulb is made by glass, please be careful when you hanging it.
- The Dimming Kit operates with AC 120V power only.
- When using the remote control for the first time, please check the battery is in place and remote any plastic protection sleeve.
- Disconnecting the string light from power supply to install the light bulbs.
- Do not turn on the light with any empty socket.
- Do not overload sockets or string lights. 150W is the maximum operating power.
- Please keep it away from children.
- Please keep the light dry and clean
- Please do not hang anything from the string lights as the extra weight may break the light wire and cause potential fire hazard.
- Although our lights are built with safety measures, we do not recommend leaving the light unattended or turning on permanently.
- please pull off the plug when it is not in use.
- please cut off the power before installing the bulb.E.g :Bulb power: 1.5wString light power: 22.5wMaximum number of string lights will be 150W/22.5W≈6 sets
4
Correct Disposal Of This Product:
(Waste Electrical& Electronic Equipment)This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.Business users should contact their supplier check the terms and conditions of the purchase contacts. this product should not be mixed with other commercial waste for disposal.
FCC Statement for Dimmer Control:
Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
5
Note:The dimmer control has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
6
[xyz-ips snippet=”download-snippet”]