NEXTION NX4832T035 3.5 Inch HMI TFT LCD Touch Display Module User Manual



Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tubes. With the Nextion Editor software (Official Download), users are able to create and design their own interfaces for the Nextion display.Package includes Nextion Display, connecting wire, a power supply test board. Note: the small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it.

Caution:Working under insufficient power supply conditions will damage the Nextion model easily.Blurred screen? Flashing? You may be suffering from power shortages. Power off at the first possible moment_ No more repeated attempts to damage your Nextion model.A small connector is included in the package. Please try to power Nextion with your phone charger through the connector to check if Nextion works well.A high-quality USB cable is required.

Nextion Models

Nextion Type Basic Series
Nextion Models NX4832T035_011N (N: No touch)
NX4832T035_011R (R: Resistive touchscreen)


Data Description
Color 64K 65536 colors 16 bit 565, 5R-6G-5B
Layout size 100.5 (L)x54.94 (W)x4.25 (H) NX4832T035 011N
100.5 (L)x54.94 (W)x5.45 (H) NX4832T035 011R
Active Area (A.A.) 85.50mm(L)x54.94mm(W)
Visual Area (V.A.) 73.44mm(L)x48.96mm(W)
Resolution 480×320 pixel Also can be set as 320×480
Touch-type Resistive
Touches > 1 million
Backlight LED
Backlight lifetime (Average) >30,000 Hours
Brightness 200nit (NX4832T035_011N) 0% to 100%, the interval of adjustment is 1%
180 nit (NX4832T035_011R) 0% to 100%, the interval of adjustment is 1%
Weight 38.2g (NX4832T035_011N)
48.2g (NX4832T035_011R)

Electronic Characteristics

Test Conditions Min Typical Max Unit
Operating Voltage 5. 5 7 V
Operating Current VCC=+5V. Brightness is 100% 145 mA
SLEEP Mode 15 mA

Power supply recommend:5V, 500mA, DC

Working Environment & Reliability Parameter

Test Conditions Min Typical Max Unit
Working Temperature 5V, Humidity 60% -20 25 70 °C
Storage Temperature -30 25 85 °C
Working Humidity 25°C 10% 60% 90% RH

Interfaces Performance

Test Conditions Min Typical Max Unit
Serial Port Baudrate Standard 2400 9600 115200 bps
Output High Voltage 10H=-1mA 3.0 3. V
Output Low Voltage 10L=1mA 0.1 0.2 V
Input High Voltage 2.0 3. 5.0 V
Input Low Voltage -1. 0.0 1. V
Serial Port Mode TTL
Serial Port 4Pin_2.54mm
USB interface NO
SD card socket Yes (FAT32 format), support maximum 32G Micro SD Card * microSD card socket is exclusively used to upgrade Nextion firmware /HMI design

Memory Features

Memory Type Test Conditions Min Typical Max Unit
FLASH Memory Store fonts and images 16 MB
RAM Memory Store variables 3584 BYTE
report this ad

[xyz-ips snippet=”download-snippet”]