Auto Ref Keratometer ARK-F
Product/Model name: AUTO REF/KERATOMETER ARK-FAUTO REFRACTOMETER AR-FBrochure and listed features of the device are intended for non-US practitioners.Specifications may vary depending on circumstances in each country.Specifications and design are subject to change without notice.The tablet described in this brochure is not included or sold with the ARK-F/AR-F.
ARK-F/AR-F Specifications
| Auto refractometer Measurement range
Minimum measurable pupil diameter |
Sphere -30.00 to +25.00 D (VD = 12 mm) (0.01/0.12/0.25 D increments) Cylinder 0 to ±12.00 D (0.01/0.12/0.25 D increments) Axis 0 to 180° (1°/5° increments) ø2 mm |
| Auto keratometer*1 Measurement range
Sagittal measurement |
Curvature radius 5.00 to 13.00 mm (0.01 mm increments) Refractive power 25.96 to 67.50 D (n = 1.3375) (0.01/0.12/0.25 D increments) Cylindrical power 0 to ±12.00 D (0.01/0.12/0.25 D increments) Axis 0 to 180º (1°/5° increments) 25º each from the center (superior side, inferior side, temporal side, nasal side) |
| Vision comparison | Available with scenery chart |
| Retro illumination image | Available |
| Accommodation measurement range | 0 to 10.00 D (0.01/0.12/0.25 D increments) |
| Pupillary distance measurement range | 30 to 85 mm (1 mm increments) (Near point PD: 28 to 80 mm at WD = 40 cm) |
| Corneal size measurement range | 10.0 to 14.0 mm (0.1 mm increments) |
| Pupil size measurement range | 1.0 to 10.0 mm (0.1 mm increments) |
| Auto tracking | Fully automatic 3D tracking(X-Y-Z directions) |
| Auto shot | Available |
| Auto measurement | Start automatically after eye detection |
| Auto transition from right to left eye measurement | Available |
| Display | 7.0-inch touch color LCD with tilting and swiveling functions |
| Printer | Thermal line printer with easy loading and auto cutter |
| Interface | RS-232C: 2 ports
USB: 2 ports LAN: 1 port Wireless LAN (WLAN): 1ch (Type A and B only)*2 |
| Power supply | 100 to 240 V AC, 50/60 Hz |
| Power consumption | 100 VA |
| Dimensions/Mass | 305 (W) x 492 (D) x 488 (H) mm / 20 kg
12.0 (W) x 19.4 (D) x 19.2 (H)” / 44 lbs. |
| Standard accessories | Printer paper, Power cord, Dust cover, Chinrest paper, Fixing pins for chinrest paper,
Spherical model eye with integrated contact lens holder |
| Optional accessories | Communication cable (RS-232C), Barcode scanner, Magnetic card reader,
Hand-held control (wired or wireless type), Tablet control software |
comfortable, more seamless for anyone
Reliably accurate eye examination equipment with comfortable operability has become worldwide standard.
It is used every day; that’s why NIDEK stands behind it with complete dedication and professionalism. Our ARK-F/AR-F impressively changes your “standard” with its smooth, fully-automatic and precise measurement and high freedom of installation, in addition to the conventional accurate measurement.
Advanced operation
Remarkably easy workflow through fully-automatic measurement
Simply by placing the chin on the chinrest, NIDEK eye detection camera automatically detects the position of the eyes and measurement starts without pressing any button. Gentle voice guidance facilitates smooth measurement for any operator.
- “Measurement starting. Please keep your hands away from the device”A patient places chin on the chinrest. The device automatically detects the position of the eyes and eye level.
- “Please open your eyes wide.”The measuring unit automatically moves to the measuring position with the screen changing to the patient’s eye image and measurement starts. The device then moves to the opposite eye and repeats the procedure.
- “Measurement finished.”When measured values for the left and right eyes are obtained, measurement ends.
- Selectable and intuitive manual operationManual measurement using the large, durable 7.0-inch touch screen is also possible with the ARK-F/AR-F. Alignment is easily achieved by simply long-pressing a position on the screen and an icon. Clearly identifiable icons assure intuitive operation. Moreover, a newly designed hand-held control and tablet control software are available as options that increase operator freedom and productivity.
- Optional accessories
- Hand-held control (wired/wireless):Ergonomically designed palm-fit controller offers an all-new handling experience. Simple and well-organized button layout provides excellent single-handed operation. It can be stored in a dedicated holder which can be attached to either side of the ARK-F/AR-F.
- Tablet control software:When using a tablet as a controller, the screen of the ARK-F/AR-F is duplicated on the tablet screen. It is even possible to measure with the same accuracy and comfort from a remote location.
A patient places chin on the chinrest. The device automatically detects the position of the eyes and eye level.
The measuring unit automatically moves to the measuring position with the screen changing to the patient’s eye image and measurement starts. The device then moves to the opposite eye and repeats the procedure.
When measured values for the left and right eyes are obtained, measurement ends.
Manual measurement using the large, durable 7.0-inch touch screen is also possible with the ARK-F/AR-F. Alignment is easily achieved by simply long-pressing a position on the screen and an icon. Clearly identifiable icons assure intuitive operation. Moreover, a newly designed hand-held control and tablet control software are available as options that increase operator freedom and productivity.
Accurate measurement
Large pupil zone imaging method
The large pupil zone imaging method enables the measurement of wider area refraction up to 6 mm diameter and can indicate the difference between the wide area refraction and central area refraction of up to 3.5 mm diameter. These pupil diameters are measured simultaneously.The difference of the measurement allows assessment of the effect of pupil size such as a vision in dim light.
Super luminescent diode and highly sensitive CCD
Incorporation of the super luminescent diode (SLD) provides a sharper and clearer image compared to a conventional LED.The highly sensitive CCD detects the ring image even if the fundus reflection is weak. The system, that combines the SLD and highly sensitive CCD, significantly improves measurement capability even in dense cataractous eyes.
Keratometry measurement with mire ring (available for the ARK-F)
The mire ring is used to measure keratometry. It reduces eyelid artifacts.
NIDEK eye detection camera (NEDC)
When the device recognizes that the patient’s chin is correctly positioned on the chinrest, the new NIDEK eye detection camera (NEDC) automatically starts eye detection. Since NEDC holds eye position, faster and more precise alignment is possible without wasted adjustment time.
Flexible and space-saving design
Large tilt and swivel monitor
Since the screen can be continuously tilted and swivel, the ARK-F/AR-F can be placed anywhere in an examination area; installation against a wall or in a corner of the room is now possible. Of course, the conventional face-to-face position is still possible, but more comfortable than ever. Freedom of operator mobility even enables the support of a patient’s eyelids during measurement. Flexible layout and space saving design contribute to improved productivity and efficiency.
Practical and user-friendly features
Patient-friendly accommodation measurement
Objective measurement of accommodation is performed with patient’s focusing on a target which moves from distant to near. Intelligent algorithm detects the patient response and reduces the measurement time in cases with a slow or weak accommodative response.The accommodation measurement helps to assess pseudomyopia, eyestrain, and accommodative palsy.
Retroillumination image and NIDEK cataract indices
The retroillumination image enables the observation of opacity of the optical media of the eye. NIDEK cataract indices indicate the severity of the opacity and help to assess the progression of pathology.
The NIDEK cataract indices are for reference only.The following conditions may indicate different indices from ones of actual status.
- Peripheral image is darkly captured due to alignment position.
- Opacities are not in focus.
- Bright spot reflecting observation light occurs on the cornea apex.
- Position of the 3 mm diameter circle is shifted due to incorrect pupil detection caused by opacity location.
Recall function for instant vision comparisons
The recall function provides the instant comparison between vision corrected with AR data and uncorrected vision or vision corrected with the data of patient’s own glasses. For the patient, this function demonstrates the difference in vision and the necessity for more appropriate vision correction.
Quick shot mode
Quick shot mode may be beneficial for children or others, who have difficulty holding their eyes steady during an examination.*Quick shot mode is for reference.
CS, PS, and PD measurement
CS (corneal size), PS (pupil size), and PD (pupillary distance) values can be measured manually based on eye images.
Summary display, printout and transfer of measured values
Various measured values can be displayed simultaneously on the summary screen allowing easy and quick confirmation and printing. Measured data can be exported to the NIDEK refractor or a connected computer.
High speed printer with easy loading & auto cutter
The printer paper can be changed easily. The data sheet is cut by an auto cutter for quick and easy detachment.
Network configuration with high flexibility
Quick and easy wireless data transfer
NIDEK refraction products allow for quick and easy wireless data transfer*using the Eye Care card, WLAN or infrared communication.This is helpful for making a simple refraction system without complicated wired connection.
*The specifications for wireless data transfer differ according to each product and from country to country.The requirements also differ depending on the method of wireless data transfer.
References
[xyz-ips snippet=”download-snippet”]