NINJA Mega Kitchen System Owner’s Manual

BL771OWNER’S GUIDEMega Kitchen System®

www.ninjakitchen.com1 877 646-5288

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING YOUR NINJA® MEGA KITCHEN SYSTEM®.POLARIZED PLUG WARNING: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT modify the plug in any way. WARNING: Extension cords are not recommended for use with this product. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

  1. WARNING: Remove utensils prior to processing. Failure to remove may cause the jar to be damaged or to shatter which may cause personal injury.
  2. WARNING: Stacked Blade Assembly is sharp, not locked in place and removable, handle with care. When handling the Stacked Blade Assembly, always hold it by the shaft. Failure to do so will result in a risk of laceration.
  3.   WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. If pouring with the lid removed, carefully remove the Stacked Blade Assembly first, holding it by the shaft. Failure to do so will result in a risk of laceration.
  4. WARNING: Chopping Blade Assembly and Mini Prep Bowl Blade Assembly are sharp and not locked in place. Before emptying contents carefully remove lid and Chopping Blade Assembly or Mini Prep Bowl Blade Assembly, holding it by the shaft. Failure to do so will result in a risk of laceration.
  5. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure build-up, resulting in risk of the user being burned.
  6. CAUTION: We do not recommend grinding in any of our Nutri Ninja™ cups.
  7. CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
  8. To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.
  9. DO NOT allow the appliance to be used by children. Close attention is necessary when used near children. This is not a toy.
  10. Never leave an appliance unattended when in use.
  11. Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.
  12. Turn the appliance Off and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.
  13. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.
  14. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. This appliance has no serviceable parts. Return the appliance to SharkNinja Operating LLC for examination, repair or adjustment.
  15. DO NOT let the power cord hang over the edge of table or counter or touch hot surfaces such as the stove. 16 Always use appliance on a dry, level surface. 17 Keep hands, hair, clothing, as well as utensils out of container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.
  16. Avoid contact with moving parts.
  17. DO NOT attempt to sharpen blades.
  18. DO NOT use the appliance if blade assemblies are bent or damaged.
  19. To reduce risk of injury, never place the blade assemblies on the base without the pitcher or Nutri Ninja® cup properly attached.
  20. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).
  21. The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in fire, electric shock or personal injury.
  22. DO NOT remove the container from the motor base while the appliance is in operation.
  23. To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.
  24. DO NOT expose containers to extreme temperature changes.
  25. DO NOT overfill.
  26. DO NOT operate the appliance empty.
  27. If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 15 minutes before using again.
  28. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.
  29. The maximum rating is based on the Stacked Blade Assembly (pitcher) that drives the greatest power and other recommended attachments may draw significantly less power or current.

SAVE THESEINSTRUCTIONS

THIS BOOK COVERS MODEL NUMBER:BL771TECHNICAL SPECIFICATIONSVoltage: 120V.,    60Hz.Power:               1500 WattsPitcher Capacity:               72 oz. (9 cups, 2.15 L)MAX Liquid Capacity:     64 oz. (8 cups, 1.9 L)Bowl Capacity:                64 oz. (8 cups, 1.8 L)Mini Prep Bowl Capacity:     24 oz. (3 cups, 710 ml)Nutri Ninja® Cup Capacity:      16 oz. (2 cups, 470 ml)

Thank you for purchasing the Ninja® Mega Kitchen System®

Getting To Know Your Ninja® Mega Kitchen System®

a 16 oz. Nutri Ninja® Cup (x2)b To-Go Lid (x2)c Nutri Ninja Blade Assemblyd 64 oz. Food Processor Bowle Bowl Lid with Locking Handlef Chopping Blade Assembly (bowl)g Dough Blade Assembly (bowl)h 24 oz. Mini Prep Bowli Spindle for Mini Prep Bowlj Mini Prep Bowl Blade Assemblyk 72 oz. Blender Pitcherl Pitcher Lid with Locking Handlem Stacked Blade Assembly (pitcher)n Motor Baseo Power Cord (not shown)

NOTE: Blade Assemblies are not interchangeable.

FEATURES:

  • Patented Ninja® Technology
  • Extra Large, 72 oz. Blender Pitcher (maximum liquid capacity 64 oz.) – BPA Free
  • 64 oz. Food Processor Bowl with Drizzle Hole – BPA Free
  •  24 oz. Mini Prep Bowl – BPA Free
  • Nutri Ninja® Cups – BPA Free
  • Lock-In Lid, Featuring Pour Spout
  •  Easy to Clean Electronic Control Panel
  •  Sturdy, Non-Slip Base

Before First Use

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:IMPORTANT: Make sure that the motor base is plugged in for use.IMPORTANT: Never add ingredients into the container before placing the Blade Assembly in first.IMPORTANT: Blade Assemblies are not interchangeable.IMPORTANT: DO NOT attempt to operate the appliance without the lid on.IMPORTANT: Never run the appliance empty.IMPORTANT: Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the blender pitcher. Failure to do so will result in a risk of laceration

WARNING: Stacked Blade Assembly is sharp and not locked in place. If pouring with the lid removed, carefully removethe Stacked Blade Assembly first, holding it by the shaft. Failure to do so will result in a risk of laceration.

WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do so will result in a risk of laceration.

CAUTION: Do not immerse the motor base into water or any other liquid.

  1. Remove all packaging material and labels from the appliance. Separate/remove all parts from each other.
  2. Wash the lids, pitcher, bowls, Nutri Ninja® cups and blade assemblies in warm, soapy water. When washing the blade assemblies, use a dishwashing utensil with a handle to avoid direct hand contact with blades. WARNING: Handle the Blade Assemblies with care when washing, as the blades are sharp.
  3. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.
  4. The pitcher, bowls, Nutri Ninja cups, lids and Blade Assemblies are all dishwasher safe. It is recommended that the lids and Blade Assemblies be placed on the top rack. Ensure that the Blade Assemblies are removed from the containers before placing in the dishwasher.
  5. Wipe the motor base clean with a damp cloth.

Assembly and Use for the Blender PitcherWARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or to shatter, which may cause personal injury.WARNING: Never leave the appliance unattended while in use.CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

  1.  Review warning and caution statements above before proceeding to number
  2.  Place the motor base on a clean, dry, level surface such as a counter or tabletop.
  3.  Align and lower the Pitcher onto the motor base. (Fig. 1) Handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.
  4.  Rotate the blender pitcher clockwise until it clicks in place. As the pitcher rotates, it will lower and the safety tabs on the bottom of the pitcher will slide under the safety tabs on the top of the motor base. (Fig. 2)
  5. The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner. (Fig. 3a, Fig. 3b)
  6.  Holding the Stacked Blade Assembly by the top of the shaft, place it onto the drive gear inside the pitcher. Ensure that the Stacked Blade Assembly is seated properly and is standing upright. (Fig. 4)NOTE: The Stacked Blade Assembly will fit loosely on the drive gear.
  7. Add the ingredients to the pitcher, making sure that they do not exceed the highest measured marking line on the side of the pitcher.NOTE: If you need to add additional ingredients while the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.NOTE: When blending any kind of liquids, such asmixtures of any drinks or smoothies, do not exceed the“Max liquid” mark (64 ounces) on the pitcher.
  8. Plug the power cord into the electrical outlet and press the power button ( ).IMPORTANT: As a safety feature, the power button ( ) will flash and the motor will not work if the pitcher and lid are not installed correctly.  When the pitcher and lid are installed properly, the power button ( ) will be solid, indicating thatthe appliance is ready for use.
  9. Holding the lid by the handle in the upright position, place it on top of the pitcher aligning the arrow ( ∇) located on the lid with the arrow ( Δ) located on the pitcher’s handle. (Fig. 5) Press the handle down until you hear a click.USE / REMOVAL
  10. Review ALL warning and caution statements before proceeding.
  11. Select the speed that best suits your needs. (Fig. 6)NOTE: Pulse ingredients for even chopping by pressing down in short intervals.
  12. When you have reached your desired consistency, stop the appliance by pressing the power button ( ) and wait for the blade assembly to stop turning. (Fig. 7)
  13. To remove the lid, press the release button on the lid, pull the lid handle up to a 90° angle and lift the lid off. Turn the pitcher counterclockwise and then lift off the base. (Fig. 7, Fig. 8) WARNING: Never insert your hands in the pitcher as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher. WARNING: Never insert your hands in the pitcher as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.
  14. Open the pour spout cap and use the spout to empty liquid contents.
  15. For thicker consistencies, first remove the lid by pressing the release button and pulling the lid handle up to a 90-degree angle to lift lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty contents from the pitcher.
  16. Make sure that the unit is unplugged when not in use.
  17. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 9)

Assembly and Use for the Nutri Ninja® Cup

WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY/USE/REMOVAL

For best results, use short “PULSES”… Practice makes perfect!!

  1. Review warning and caution statements above before proceeding to number 2
  2. Place the motor base on a clean, dry, level surface such as a counter or table top.
  3.  Add ingredients to the Nutri Ninja® cup.
  4. Place the Nutri Ninja Blade Assembly onto the cup and screw it tightly until you have a good seal. (Fig. 1)
  5.  Turn the Nutri Ninja® cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Turn the Nutri Ninja® cup clockwise to lock into place. You will hear a click when the lock is engaged. (Fig. 2) Turn the power button on, the single serve button will illuminate.
  6.  Press down on the Single Serve button in short intervals to activate. (Fig. 3)
  7.  Once you have reached your desired consistency,turn the power button off. Turn the Nutri Ninja® cup counter-clockwise and pull straight up to remove. (Fig. 4, Fig. 5).NOTE: Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line.
  8.  Turn the cup upright and remove the Nutri Ninja Blade Assembly by twisting the blade assembly counterclockwise.
  9.  Place the To-Go drinking lid onto the Nutri Ninja® cup, twist to seal and enjoy!
  10.  Make sure that the motor base is unplugged when not in use.
  11.  To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 6)

NOTE: To order additional Nutri Ninja® Cups, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

Assembly and Use for the Food Processor Bowl

WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully remove lid and Chopping Blade Assembly,  holding it by the shaft. Failure to do so will result in a risk of laceration.WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter, which may cause personal injury.WARNING: Never leave the appliance unattended while in use.CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

  1. Review warning and caution statements above before proceeding to number 2.
  2. Place the motor base on a clean, dry, level surface such as a counter or tabletop.
  3. Align and lower the Bowl onto the motor base. (Fig. 1) Handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.
  4.  Rotate the bowl clockwise to lock into place. You will hear a click when the lock is engaged. (Fig. 2)
  5. The bowl can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner. (Fig. 3a, Fig. 3b)
  6. Holding the desired Blade Assembly by the top of the shaft, place it onto the drive gear inside the bowl. Ensure that the Blade Assembly is seated properly and is standing upright. (Fig. 4)NOTE: The Blade Assembly will fit loosely on the drive gear.
  7.  Add the ingredients to the bowl, making sure that they do not exceed the highest measured marking line on the side of the bowl.
  8. Holding the lid by the handle in the upright position, place it on top of the bowl aligning the arrow (∇ ) located on the lid with the arrow (Δ ) located on the bowl’s handle. (Fig. 5) Press the handle down until you hear a click.NOTE: The 64 oz. bowl is not intended for blending drinks. Do not overfill.NOTE: To add liquids during processing, open the drizzle hole on the top of the lid and pour the liquid slowly into themixture.
  9.  Plug the power cord into the electrical outlet and press the power button ( ).IMPORTANT: As a safety feature, the power button () will flash and the motor will not work if the bowl and lid are not installed correctly. When the bowl and lid are installed properly, the power button () will be solid, indicating that the appliance is ready for use.USE CHOPPING

    BLADE ASSEMBLY/ REMOVAL / USE DOUGH BLADE ASSEMBLY

  USING THE CHOPPING BLADE ASSEMBLY

  1. Review warning and caution statements at the top of page 11 before proceeding to number 2.
  2. Place the motor base on a clean, dry, level surface such as a counter or table top.
  3. Secure the bowl onto the motor base.
  4. Holding the Chopping Blade Assembly by the shaft, place it onto the gear shaft inside the bowl. Ensure that the Chopping Blade Assembly fits around the gear shaft and that it is standing straight. (Fig. 1)
  5.  Add the ingredients and secure the bowl lid onto the bowl. (Fig. 1)
  6.  Plug the power cord into the electrical outlet and press on the power button ( ). (Fig. 2) Select the speed that best suits your needs. Pulse ingredients for even chopping by pressing down in short intervals.NOTE: Please refer to “Speed Settings & Uses” chart for suggested uses and speeds.
  7. When you have reached your desired consistency, stop the appliance by pressing the power button ( ) and wait for the Chopping Blade Assembly to stop turning.
  8. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle. (Fig. 2)
  9. Turn the bowl counter-clockwise and lift it to remove it from the motor base. (Fig. 3)
  10. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 4)

USING THE DOUGH BLADE ASSEMBLYIMPORTANT: Use only the “DOUGH” button when using this attachment.

  1.  Review warning and caution statements at the top of page 11 before proceeding to number 2.
  2. Place the motor base on a clean, dry, level surface such as a counter or tabletop.
  3. Secure the bowl onto the motor base.
  4. Holding the Dough Blade Assembly by the shaft, place it onto the gear shaft inside the bowl. Ensure that the Dough Blade Assembly fits around the gear shaft and that it is standing straight. (Fig. 5)
  5. Add the ingredients and secure the bowl lid onto the bowl. (Fig. 5)NOTE: For best results add wet ingredients first and then add dry ingredients.
  6. Plug the power cord into the electrical outlet and press on the power button ( ). (Fig. 2)
  7. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle. (Fig. 2)
  8. Turn the bowl counter-clockwise and lift it to remove it from the motor base. (Fig. 3)
  9. To release the motor base from the counter or tabletop, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 4)

Assembly and Use for the 24 oz. Mini-Prep Bowl

  1. Review warning and caution statements above before proceeding to number 2.
  2. Place the 64 oz. bowl onto the motor base. (See assembly instructions on page 11.)
  3. Holding the spindle by the shaft, place it onto the gear shaft inside the 64 oz. bowl. Ensure that the Mini Prep Bowl Blade Assembly fits around the gear shaft and that it is standing straight. (Fig. 1)
  4. Place the mini prep bowl aligning the spindle inside the center post. (Fig. 2)
  5. Hold the Mini Prep Bowl Blade Assembly by the shaft and carefully place it over the center post of the mini prep bowl. (Fig. 3)
  6. Add ingredients into the mini prep bowl.NOTE: Do not fill ingredients past the “MAX” fill line.
  7. Holding the lid by the handle in the upright position, place it on top of the 64 oz. bowl aligning the arrow ( ) locatedon the lid with the arrow ( ) located on the bowl’s handle. (Fig. 4) Press the handle down until you hear a click.
  8. Plug the power cord into the electrical outlet and press on the power button ( ).
  9. Select the speed that best suits your needs. For best results, press the Pulse button in short intervals. (Fig. 5)NOTE: Please refer to “Speed Settings & Uses” chart for suggested uses and speeds.
  10. When you have reached your desired consistency, stop the appliance by pressing the power button ( ) and wait for the Mini Prep Bowl Blade Assembly to stop turning.
  11. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle. (Fig. 6)
  12. Carefully hold the Mini Prep Bowl Blade Assembly by the shaft and lift it out of the mini prep bowl. (Fig. 7)
  13. Turn the bowl counter-clockwise and lift it to remove it from the motor base.
  14. To release the motor base from the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 8)

Speed Setting & Uses

FUNCTION CONTAINER ATTACHMENT SPEED BUTTON TYPE OF FOOD
Single Serve Blending Nutri Ninja® Cup Nutri Ninja Blade Assembly Single Serve Smoothies Frappes Milk Shakes
Mincing Nutri Ninja Cup Mini Prep Bowl Nutri Ninja Blade Assembly Mini Prep Bowl Blade Assembly Single Serve Pulse Onion Garlic Herbs
Kneading Bowl Dough Blade Assembly 1 Bread dough Pie dough Pizza dough Pretzel dough
Dough Mixing Bowl Dough Blade Assembly 1 Cookie dough
Processing Pitcher Bowl Nutri Ninja Cup Mini Prep Bow Stacked Blade Assembly Chopping Blade Assembly Nutri Ninja Blade Assembly Mini Prep Bowl Blade Assembly 2 Pulse Single Serve Pâtés Stewed fruits Dips Apple sauce Spreads Soups* Baby food
Emulsifying Bowl Mini-Prep Bow Chopping Blade Assembly Mini Prep Bowl Blade Assembly 2 Salad Dressings Dips Sauces*
Grinding Bowl Chopping Blade Assembly 2 Meat
Grating Bowl Nutri Ninja Cup Chopping Blade Assembly Nutri Ninja Blade Assembly 3 or Pulse Single Serve Grated cheese Bread crumbs Spices
Chopping tri Ninja Cup Mini Prep Bowl Pitcher Chopping Blade Assembly Nutri Ninja Blade Assembly Mini Prep Bowl Blade Assembly Pulse Single Serve 3 Salsa Vegetables Nuts
Mixing Bow Dough Blade Assembly 1 Light cake mixes Batters
Ice Crushing Pitcher Nutri Ninja Cup Stacked Blade Assembly Nutri Ninja Blade Assembly 3 Single Serve Ice
Pureeing Pitcher Nutri Ninja Cup p Stacked Blade Assembly Nutri Ninja Blade Assembly 3 Single Serve Smoothies Smooth soups Milkshakes

* When blending sauces and soups, make sure they’re cooled to room temperature first – Ninja® containers are not intended for hot blending.

Care & Maintenance

HOW TO CLEANCAUTION: Make sure that the motor base is unplugged from the power source before inserting or removing any blade assembly and before cleaning.CAUTION: DO NOT immerse the motor base into water or any other liquid.CAUTION: Handle the blade assemblies with care, as the blades are very sharp.1  Separate/remove all parts from each other.2  Hand Washing: Wash the lids, pitcher, bowls, Nutri Ninja® cup and blade assemblies in warm, soapy water. When washing the blade assemblies, use a dishwashing utensil with a handle to avoid direct hand contact with blades. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.Dishwasher: The containers, lids, blade assemblies and attachments are all dishwasher safe. The lids and blade assemblies are top rack dishwasher safe. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.WARNING: Handle the Blade Assemblies with care when washing, as the blades are sharp. Contact with the blades’ edges can result in laceration.3  Wipe the motor base clean with a damp cloth. Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288.

HOW TO STORE1 Store the Ninja® Mega Kitchen System® upright the blade assembly inside the corresponding container with the lidsecured on top. Do not place anything on top. Store the rest of the attachments in a safe place where they willnot be damaged and won’t cause harm. Loosely wrap the power cord around the motor base.RESETTING THE MOTOR THERMOSTATThe Ninja Mega Kitchen System features a unique safety system that prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the appliance, follow the resetting procedure below:1  Unplug the appliance from the electrical outlet.2  Remove and empty the container and ensure that no food is jamming the Blade Assembly.3  Allow the appliance to cool for approximately 15 minutes.4  Re-install the container onto the base and re-plug the appliance into the electrical outlet.5  Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or Blade Assembly Doesn’t Rotate. Make sure the container is securely locked on the motor base. Make sure the lid is securely on the container in the correct position (align arrows). The appliance is turned “Off”. Press the power button ( ) to turn “On”. Check that the plug is securely inserted into the electrical outlet. Check the fuse or circuit breaker. The unit has overheated or overloaded. Unplug and wait approximately 15 minutes before using again. Check to make sure the unit is not overloaded
Food is Unevenly Chopped. Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.
Food is Chopped Too Fine or is Too Watery. The food has been over-processed. Use pulse button for controlled processing.
Food Collects On Lid or On the Sides of the Container. The mixture is too thick. Add more liquid
You Cannot Achieve Snow From Solid Ice. Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer. Start with a few pulses and then go to a continuous blending cycle
Motor Base Won’t Stick to Counter or Table Top. Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished finishes. DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure, (cutting board, platter, plates, etc.).

Replacement Parts

ORDERING REPLACEMENT PARTSTo order additional parts and attachments, please visit our website: www.ninjakitchen.comor feel free to contact customer service: 1-877-646-5288.

Notes:

ONE (1) YEAR LIMITED WARRANTY

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC.If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be included.* This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied, and/or conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.*IMPORTANT: Carefully pack items to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number, and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

PRODUCT REGISTRATION

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days ofpurchase. You will be asked to provide the store name, date of purchase, and model number along with your name and address. The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

SharkNinja Operating LLCUS: Newton, MA 02459CAN: Ville St-Laurent, QC H4S 1A71-877-646-5288www.ninjakitchen.comMega Kitchen System, Ninja, and Nutri Ninja, are registered trademarks of SharkNinja Operating LLC.Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents.© 2016 SharkNinja Operating LLCBL771_30_E_16014_3PRINTED IN CHINA

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,