NISBETS ESSENTIALS DA091 5kg Electronic Scales Instruction Manual

Table of Contents

Electronic ScalesInstruction manualModel: DA091

Features:

Indicates the volume of milk and water
Converts between metric and imperial measurements, for both weight and volume
Low battery power / Overload indication
High precision strain gauge sensor
Zero and tare function
Auto-off
Increment: 1g/0.1oz
Max. load capacity: 5kg / 11lb
Min. load capacity: 20g

To install or replace batteries

Remove the battery compartment cover (on the bottom of the appliance).
Insert 2 x 1.5V AAA batteries (not supplied), and ensure to follow polarity markings on the battery compartment. Re-locate the battery compartment cover.
Position the appliance on a flat stable surface.

Note: It is important that the scales are level to ensure accuracy.

LCD Screen:

Button function

MODE Mode conversionTurn on / Turn off / Zero / TareUNITConvert unit systems between Metric and imperial(Conversion button on the bottom of the appliance)

Mode conversion

Pressto turns on.
Press the MODE button to select the desired mode as shown below.

To convert weight unit

If the scale is with both unit systems of metric (g, ml) and Imperial (lb:oz, fl’oz), press MODE bottom to choose the working mode (weight, milk volume, water volume). Then press the UNIT conversion button to convert between two systems.Take the conversion of weight unit for example:

When setting “g” as weight unit, the default volume unit is “ml”.
When setting “lb: oz” as weight unit, the default volume unit is “fl’oz”.

To start weighing

Weighing mode

Place a bowl (if necessary) on the scale.
Pressto turns on. Wait until LCD shows “O”.
Press the MODE button to convert to weighing mode.
Load weighing object on the scale (or in the bowl) to start weighing. LCD will show the weight reading.
If the weighing object is water or milk, press the MODE button to choose volume mode and view the volume of the weighing object.

Volume indication mode

Pressto turns on. Wait until LCD shows “O”.
Press the MODE button to choose “Water” or “Milk” mode.
Put a liquid container onto the scale platform.LCD shows the weight of the container.
Pressto zero or tare weight.
Pour the liquid (water or milk) into the container. LCD shows the volume of the liquid.
Press the MODE button to choose “Weight” mode and view the weight of the liquid.

“ZERO” or “TARE” function

To weigh different loads consecutively without removing previous loads from the scale:

Put the first Load on the scale and get a weight reading.
Press the button to reset the reading to “O” before adding the next load. You can repeat this operation.

Condition 1: “ZERO” functionWhen the total sum of all loads on the scale is ≤4% of the scale’s max. weight capacity (4% here means 200g with this scale), LCD will show “—–” or “0g” each time is pressed.“—–” means reading is not stable. Please wait for a moment. “0g” and meanwhile an icon “O” on the left side of LCD indicate ZERO function is activated. In this case, Max. weight capacity remains unchanged.

Condition 2: “TARE” functionWhen the total sum of all loads on the scale is >4% of the scale’s max. weight capacity, LCD will show “—–” or “0g” each time is pressed.“—–” means reading is not stable. Please wait for a moment. “0g” and meanwhile an icon “T” on the left side of LCD indicate TARE function is activated. In this case, Max. Weight capacity is reduced by the total weight of all loads.

Under this condition:

By pressing, you can see the total weight of all loads on the scale.
To weigh more loads, just press to reset LCD reading to ‘0’ again.

Shut off

Auto shut-off: Auto shut-off occurs if LCD shows ‘0’ or shows the same weight reading for 2 minutes.Manual shut-off: To maximize battery life, press the button continuously to turn off the scale after use.

Warning indicators

	Low battery.Replace with new batteries.
	Scale overloaded.Remove items to avoid damage

Cleaning, Care & Maintenance

Clean the case with a damp cloth and warm water.
Remove the batteries if the unit is not to be used for an extended period of time.

Compliance

Dispose of depleted batteries in accordance with local regulations, within the EC there are nominated disposal points for batteries.The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste.To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe cycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.Nisbets Essentials parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international,independent, and federal authorities.Nisbets Essentials products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Nisbets Essentials.Every effort is made to ensure all details are correct at the time of going to press, however, Nisbets Essentials reserves the right to change specifications without notice.

DECLARATION OF CONFORMITY

Equipment Type	Model
Electronic Scales 5 Kg	DA091
Application of Territory Legislation &Council Directives(s)	Electro-Magnetic Compatibility (EMC) Directive 2014/30/EU – recast of 2004/108/ECEN 55014-1: 2017EN 55014-2: 2015Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex II toDirective 2011/65/EU
Producer Name	Nisbets Essentials

I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s), and Standard(s).

Date	23rd October 2020
Signature
Full Name	Ashley Hooper	Eoghan Donnellan	Josie Holt
Position	Technical & Quality Manager	Commercial Manager/Importer	Commercial Manager/Responsible Supplier
Producer Address	Fourth Way,Avonmouth,Bristol,BS11 8TBUnited Kingdom	2 North Point Business ParkNew Mallow RoadCorkIreland	15 Bagdally RoadCampbelltownNSW 2560