MH25 User Manual
Features
- Premium CREE XM-L U2 LED
- Maximum output of 860 lumens
- High efficiency regulation circuit
- Maximum runtime of up to 28 hours
- Intelligent charging circuit with voltage detection charges safely and rapidly
- Integrated micro USB charging port is water, dust and impact resistant.
- Multiple output modes are conveniently accessed via rapid rotary switch
- User-defined mode provides customized brightness levels plus strobe and SOS modes.
- Intelligent memory function stores preferred brightness setting
- Broad voltage circuit accepts both rechargeable and non-rechargeable Lithiumbatteries
- Optimized ultra-precise reflector offers a longer beam distance than competingproducts
- Waterproof in accordance with IPX-8 (submersible to two meters)
- Stainless steel bezel ring protects core components from damage
- Toughened ultra-clear mineral glass with anti-reflective coating
- Constructed from aerospace-grade aluminum alloy
- HAIII military grade hard-anodized
- Reverse polarity protection
- Stainless steel titanium-plated clip
- Anti-rolling design
Dimensions
Length: 160mmHead Diameter: 40mmTail Diameter: 25.4mmWeight: 145grams (without battery)
Accessories
Nitecore 18650 Li-ion battery(NL183), tactical ring, lanyard, USB cable, clip, holster, spare switch cap and spare O-ring
Battery Options
*Warning: Charge 18650 rechargeable Li-ion batteries only, do not attempt tocharge non-rechargeable batteries, CR123 or RCR123 batteries.
Brightness & Runtime
NOTICE
Stated data has been measured according to the international flashlight testing standards ANSI/NEMA FL1 using a quality NITECORE 18650 (3.7V 2600mAh) battery or two SYSMAX CR123 (3V 1550mAh) batteries under laboratory conditions. The data may vary due to individual usage habits and environmental conditions.
NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop the ANSI FL1 standard of measurement. Product testing data is in accordance with these internationally recognized scientific standards.
Operation instructions
Battery installation (see adjacent diagram)
- Unscrew the tail cap in a counter-clockwise direction.
- Insert one 18650 battery or two CR123 batteries with the positive pole pointing forward (toward the light head).
NOTE: Ensure batteries are inserted with the positive (+) end pointing to the head. The MH25 will not operate with incorrectly inserted batteries.
Charging Function
The MH25 is capable of charging a protected 18650 Li-ion battery via the includedUSB cable. Simply install a protected 18650 Li-ion cell, plugging one end of the USBcable into the flashlight and the other end into a universal USB port / adaptor and theMH25 will take care of the rest.
Charging indicator light
- Connect the charging cable to the flashlight and the A/C power adapter to the wall outlet as shown in the adjacent image. Fully charging a depleted 18650 batterytakes approximately 6 hours.
- Under normal charging conditions, the red indicator light near the charging port willblink twice every second.
- If a problem is detected during the charging process, the MH25 will stop chargingand the red indicator will blink rapidly. This is usually caused by faulty orincorrectly inserted batteries.
- When charging is complete, the red indicator will illuminate steadily.
Caution: The MH25 needs to be turned on in order to enter charging mode.
Switching ON/OFF
To switch ON: Press the button on the tailcap until a “click” is heard.To switch OFF: Press the button on the tailcap a second time until a “click” is heard.
Mode Switching
The Nitecore MH25 has two modes: Turbo and user-defined. These two modes canbe changed by simply tightening and loosening the flashlight head. Turbo provides100% output while user-defined contains five selectable sub-modes.
Turbo Mode
Turbo mode provides an output of 860 lumens and is accessed when the flashlight isswitched ON with the head lightly tightened. While in this mode, momentary illumination can be achieved by switching off the flashlight and then half pressing andholding the switch.
Note: After three minutes of use in turbo mode, the flashlight will lower itsoutput automatically to preventing overheating and increase runtime.
User-Defined Mode
User-defined mode is accessed by slightly loosening the flashlight head. In this mode,lightly and rapidly pressing the switch will cycle through brightness and otherfunctions in the following order: “High-Mid-Low-SOS-Strobe”. Pressing the switch allthe way down will save and memorize a desired setting.
Tips: Make NITECORE MH25 your perfect Multitask Hybrid flashlight.NITECORE MH25 flashlights essentially have two modes: Turbo mode (100% output)and custom mode. Turbo mode is accessed by tightening the flashlight head whileany of the five customizable modes (strobe, SOS, low, medium and high) are selectedby loosening the head and rapidly pressing the on/off switch to cycle through themodes. A given mode can be saved by simply turn off the light while in that mode.Real-world examples include: When used as a flashlight around the home, the headcan be loosened and low level selected in custom mode, providing long runtimes at alower light intensity. The same flashlight could then be taken out and used alaw-enforcement duty light, with user-defined mode set in strobe, making it easy toalternate between turbo mode and strobe with a simple twist of the flashlight head.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coatingof silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. DOA / defective products can beexchanged for replacement though a local distributor/dealer within the 14 days ofpurchase. After 14 days, all defective / malfunctioning NITECORE® products will berepaired free of charge for a period of 18 months from the date of purchase. After 18months, a limited warranty applies, covering the cost of labor and maintenance, butnot the cost of accessories or replacement parts. The warranty is nullified in all of thefollowing situations:
- The product(s) is/are broken down, reconstructed and/or modified by unauthorizedparties.
- The product(s) is/are damaged through improper use.
- The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact yournational NITECORE® distributor or send an email to
TEL: +86-20-83862000 FAX: +86-20-83882723E-mail: Web: www.nitecore.comAddress： Rm1407-08, Glorious Tower, 850 East Dongfeng Road,Guangzhou, China 510600
Nitecore MH25 Rechargeable Flashlight User Manual – Nitecore MH25 Rechargeable Flashlight User Manual –
[xyz-ips snippet=”download-snippet”]