NORTHSTAR 1571110 Wall Mounting Kits for Pressure Washer Owner’s Manual

NORTHSTAR 1571110 Wall Mounting Kits for Pressure Washer

 

KIT PART #

USED ONNorthStar ITEMS:

1571110

1571107, 1571108, 1571109

 

REF

PART#

DESCRIPTION

QTY

KIT

1

802874

Wall Mount Bracket

1

1571110

Initial Set-Up

Step 1. Inspect & UnpackUpon receiving your item check for missing or damaged parts.

  • For missing or damaged components, please contact Product Support at 1-800-270-0810.

Hardware Bag

Step 2. AssemblyNote: Remove contents from box and begin assembly.

Wall Mount Bracket AssemblyStep 1: Remove the rubber bumper if present on the pressure washer.Step 2: Install wall mount bracket # 802874 using self-tapping screws# 82082 qty-4.Step 3: Mount entire assembly on to the wall mount bracket using bolts #82621 and lock nut # 82630 qty-4.

Step 3. Select Suitable Location

Moving and HandlingElevating or lowering your pressure washer

  • To reduce risk of injury, it is recommended that two adults lift the pressure washer or a lifting device is used such as an overhead hoist or forklift.
  • Only lift the pressure washer by the base. Do not use the pump or motor as lifting point. See component identification for lifting point locations.

Positioning:

  1. The pressure washer should be positioned on a firm, level (less than 3-degree slope), heat-resistant surface with good drainage and a nearby water supply.
  2. The pressure washer should be placed within garden hose distance of a continuous water supply. Ensure that the pressure washer sits level and will not slide or shift during operation.

Airflow:

  1. Situate so there is adequate clearance around pressure washer to allow for airflow – at least 7 feet from any non-combustible wall or obstruction.
  2. Do not operate with a tarp, blanket, or cover surrounding the pressure washer.
  3. Do not place any objects against or on top of the pressure washer.
  4. The pressure washer needs adequate, unobstructed flow of air to allow for adequate cooling. Cooling ventilation is required to prevent overheating of the pressure washer and possible fire.
  5. Keep a fire extinguisher rated “ABC” nearby.

Assembled byNorthern Tool & Equipment Company, Inc.Burnsville, MN 55306NorthernTool.com

[xyz-ips snippet=”download-snippet”]